Enhancing the Alkaline Hydrogen Evolution Reaction Activity through the Bifunctionality of Ni(OH) 2 /Metal Catalysts
Abstract not provided
Engineering topics
Publications and source records attributed to Markovic, N M.
Abstract not provided
Abstract not provided
No abstract prepared.
Colloidal nanoparticles prepared by solution synthesis with robust control over particle size, shape, composition, and structure have shown great potential for catalytic applications. However, such colloidal nanoparticles are usually capped with organic ligands (as surfactants) and cannot be directly used as catalyst. We have studied the effect of surfactant removal on the electrocatalytic performance of Pt nanoparticles made by organic solution synthesis. Various methods were applied to remove the oleylamine surfactant, which included thermal annealing, acetic acid washing, and UV-Ozone irradiation, and the treated nanoparticles were applied as electrocatalysts for the oxygen reduction reaction. It was found that the electrocatalytic performance, including electrochemically active surface area and catalytic activity, was strongly dependent on the pretreatment. Among the methods studied here, low-temperature thermal annealing ({approx}185 C) in air was found to be the most effective for surface cleaning without inducing particle size and morphology changes.
Design and synthesis of materials for efficient electrochemical transformation of water to molecular hydrogen and of hydroxyl ions to oxygen in alkaline environments is of paramount importance in reducing energy losses in water-alkali electrolysers. Here, using 3d-M hydr(oxy)oxides, with distinct stoichiometries and morphologies in the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) regions, we establish the overall catalytic activities for these reaction as a function of a more fundamental property, a descriptor, OH-M{sup 2+{delta}} bond strength (0 {le} {delta} {le} 1.5). This relationship exhibits trends in reactivity (Mn < Fe < Co < Ni), which is governed by the strength of the OH-M{sup 2+{delta}} energetic (Ni < Co < Fe < Mn). These trends are found to be independent of the source of the OH, either the supporting electrolyte (for the OER) or the water dissociation product (for the HER). The successful identification of these electrocatalytic trends provides the foundation for rational design of 'active sites' for practical alkaline HER and OER electrocatalysts.
Abstract not provided
Improving the sluggish kinetics for the electrochemical reduction of water to molecular hydrogen in alkaline environments is one key to reducing the high overpotentials and associated energy losses in water-alkali and chlor-alkali electrolyzers. We found that a controlled arrangement of nanometer-scale Ni(OH){sub 2} clusters on platinum electrode surfaces manifests a factor of 8 activity increase in catalyzing the hydrogen evolution reaction relative to state-of-the-art metal and metal-oxide catalysts. In a bifunctional effect, the edges of the Ni(OH){sub 2} clusters promoted the dissociation of water and the production of hydrogen intermediates that then adsorbed on the nearby Pt surfaces and recombined into molecular hydrogen. The generation of these hydrogen intermediates could be further enhanced via Li{sup +}-induced destabilization of the HO-H bond, resulting in a factor of 10 total increase in activity.
Abstract not provided
Cations at the outer Helmholtz plane (OHP) can interact through non-covalent interactions with species at the inner Helmholtz plane (IHP), which are covalently bonded to the electrode surface, thereby affecting the structure and the properties of the electrochemical double layer. These non-covalent interactions can be studied quantitatively using cyanide-modified Pt(111) electrodes.
Chemically modifying platinum with calix[4]arene yields a highly stable anode catalyst that effectively suppresses the oxidation reduction reaction without altering the maximum activity for the hydrogen oxidation reaction (see picture, Pt blue, C gray, O red, S yellow). This behavior extends from long-range-ordered stepped single-crystal surfaces to nanocatalysts.
Modulation of Pd nanoparticle (NP) crystallinity is achieved by switching the surfactants of different binding strengths. Pd NPs synthesized in the presence of weak binding surfactants such as oleylamine possess polyhedral shapes and a polycrystalline nature. When oleylamine is substituted by trioctylphosphine, a much stronger binding surfactant, the particles become spherical and their crystallinity decreases significantly. Moreover, the Pd NPs reconvert their polycrystalline structure when the surfactant is switched back to oleylamine. Through control experiments and molecular dynamics simulation, we propose that this unusual nanocrystallinity transition induced by surfactant exchange was resulted from a counterbalance between the surfactant binding energy and the nanocrystal adhesive energy. The findings represent a novel postsynthetic approach to tailoring the structure and corresponding functional performance of nanomaterials.
Monodisperse and homogeneous Pt{sub x}Ni{sub 1-x} alloy nanoparticles of various compositions are synthesized via an organic solution approach in order to reveal the correlation between surface chemistry and their electrocatalytic properties. Atomic-level microscopic analysis of the compositional profile and modeling of nanoparticle structure are combined to follow the dependence of Ni dissolution on the initial alloy composition and formation of the Pt-skeleton nanostructures. The developed approach and acquired knowledge about surface structure-property correlation can be further generalized and applied towards the design of advanced functional nanomaterials.
In an effort to study advanced catalytic materials for the oxygen reduction reaction (ORR), a number of metallic alloy nanostructured thin film (NSTF) catalysts have been characterized by rotating disk electrode (RDE). Optimal loadings for the ORR and activity enhancement compared to conventional carbon supported nanoparticles (Pt/C) were established. The most efficient catalyst was found to be PtNi alloy with 55 wt% of Pt. The enhancement in specific activity is more than one order of magnitude, while the improvement factor in mass activity is 2.5 compared to Pt/C. Further lowering of the platinum to nickel ratio in NSTF catalysts did not lead to increased mass activity values.
Alloying has shown enormous potential for tailoring the atomic and electronic structures, and improving the performance of catalytic materials. Systematic studies of alloy catalysts are, however, often compromised by inhomogeneous distribution of alloying components. Here we introduce a general approach for the synthesis of monodispersed and highly homogeneous Pt-bimetallic alloy nanocatalysts. Pt{sub 3}M (where M = Fe, Ni, or Co) nanoparticles were prepared by an organic solvothermal method and then supported on high surface area carbon. These catalysts attained a homogeneous distribution of elements, as demonstrated by atomic-scale elemental analysis using scanning transmission electron microscopy. They also exhibited high catalytic activities for the oxygen reduction reaction (ORR), with improvement factors of 2-3 versus conventional Pt/carbon catalysts. The measured ORR catalytic activities for Pt{sub 3}M nanocatalysts validated the volcano curve established on extended surfaces, with Pt{sub 3}Co being the most active alloy.
Advancement in heterogeneous catalysis relies on the capability of altering material structures at the nanoscale, and that is particularly important for the development of highly active electrocatalysts with uncompromised durability. Here, we report the design and synthesis of a Pt-bimetallic catalyst with multilayered Pt-skin surface, which shows superior electrocatalytic performance for the oxygen reduction reaction (ORR). This novel structure was first established on thin film extended surfaces with tailored composition profiles and then implemented in nanocatalysts by organic solution synthesis. Electrochemical studies for the ORR demonstrated that after prolonged exposure to reaction conditions, the Pt-bimetallic catalyst with multilayered Pt-skin surface exhibited an improvement factor of more than 1 order of magnitude in activity versus conventional Pt catalysts. The substantially enhanced catalytic activity and durability indicate great potential for improving the material properties by fine-tuning of the nanoscale architecture.
This Letter reveals new findings on the influence of noncovalent interactions on the electrochemical interface. Using surface X-ray scattering, we demonstrate that the barium cations are located at 3.4 {angstrom} away from the surface, suggesting that they are partially hydrated, though not adsorbed at the surface. The effect of the cation on the oxygen reduction reaction (ORR) ranges from significant (Pt) to little (Au), depending on the nature of the metal and cation. Finally, we show that these results, as obtained on well-defined single-crystal surfaces, correlate well with observations on high surface area nanoparticle catalysts.
Explore the source record for details and available documents.