Engineering topics

Marmar, Earl S.

Publications and source records attributed to Marmar, Earl S..

4 records

DOE OSTI2024

Correlation of the L-mode density limit with edge collisionality

The "density limit'' is one of the fundamental bounds on tokamak operating space, and is commonly estimated via the empirical Greenwald scaling. This limit has garnered renewed interest in recent years as it has become clear that ITER and many tokamak pilot plant concepts must operate near or above the widely-used Greenwald limit to achieve their objectives. Evidence has also grown that the Greenwald scaling - in its remarkable simplicity - may not capture the full complexity of the disruptive density limit. In this study, we assemble a multi-machine database to quantify the effectiveness of the Greenwald limit as a predictor of the L-mode density limit and identify alternative stability metrics. We find that a two-parameter dimensionless boundary in the plasma edge, $\nu_{*\rm, edge}^{\rm limit} = 3.0 \beta_{T,{\rm edge}}^{-0.4}$, achieves significantly higher accuracy (true negative rate of 97.7\% at a true positive rate of 95\%) than the Greenwald limit (true negative rate 86.1\% at a true positive rate of 95\%) across a multi-machine dataset including metal- and carbon-wall tokamaks (AUG, C-Mod, DIII-D, and TCV). The collisionality boundary presented here can be applied for density limit avoidance in current devices and in ITER, where it can be measured and responded to in real time.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Boundary, SOL, and Divertor Physics Studies on TCV (Final Report for Research Funded by DoE Award DE-SC0020327)

Research supported under this grant was organized around two diagnostic systems installed on the TCV tokamak located at EPFL in Lausanne, Switzerland: Multi-Spectral Imaging (MSI) and Gas-Puff Imaging (GPI). MSI monitors 2-d time-history images of up to 10 spectral lines, in the visible, using identical views for all wavelengths. The primary application of MSI is to infer 2-d time histories of electron temperature and density in the Scrape-Off-Layer (SOL) of diverted plasmas, utilizing ratios of emission from multiple neutral helium lines. The atomic models are validated against 1-d Thomson scattering measurements. SOL density and temperature maps are analyzed to infer divertor dynamics, including particle and power flows, for a variety of divertor configurations, and specifically as flux expansion along the long-legged outboard divertor is systematically varied. GPI is used to measure details of edge fluctuations in the SOL, particularly as a function of plasma triangularity (δ), including both positive and negative δ. A threshold is found, whereby for δ<-0.3, edge turbulence in the far SOL is completely suppressed. Dynamics of the filamentary turbulence was also analyzed using advance machine learning techniques. Research in support of four PhD theses was carried out within the scope of this Award, including 2 at MIT and 2 at EPFL.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Tracking blobs in the turbulent edge plasma of a tokamak fusion device

Abstract The analysis of turbulence in plasmas is fundamental in fusion research. Despite extensive progress in theoretical modeling in the past 15 years, we still lack a complete and consistent understanding of turbulence in magnetic confinement devices, such as tokamaks. Experimental studies are challenging due to the diverse processes that drive the high-speed dynamics of turbulent phenomena. This work presents a novel application of motion tracking to identify and track turbulent filaments in fusion plasmas, called blobs, in a high-frequency video obtained from Gas Puff Imaging diagnostics. We compare four baseline methods (RAFT, Mask R-CNN, GMA, and Flow Walk) trained on synthetic data and then test on synthetic and real-world data obtained from plasmas in the Tokamak à Configuration Variable (TCV). The blob regime identified from an analysis of blob trajectories agrees with state-of-the-art conditional averaging methods for each of the baseline methods employed, giving confidence in the accuracy of these techniques. By making a dataset and benchmark publicly available, we aim to lower the entry barrier to tokamak plasma research, thereby greatly broadening the community of scientists and engineers who might apply their talents to this endeavor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Disruption Prediction and Avoidance in High Beta Long Pulse KSTAR Plasmas

This research is a concentrated and coordinated experimental and physics analysis program by a small U.S. team, focused on the topical area of “Long Pulse Control” as stated in the proposal solicitation. The overall goal of the research is to produce world-class analysis regarding forecasting and avoidance of disruptions in a long-pulse, superconducting tokamak at high stability parameters (e.g. normalized beta) with direct, quantifiable figures of merit (i.e. plasma disruption rate - “disruptivity”) and its reduction based on improved stability physics and control. The research targets the backbone of the problem – the basic, main issues – to produce this quantitative analysis by: (1) Creating and applying a new physics-based paradigm to understand how to eliminate disruptions: disruption event characterization, and event chain analysis – a direct manifestation of the approach suggested in the DOE Transients Report, (2) Ensuring that the components required to produce high-quality measurements and analysis needed for disruption event characterization for the tokamak in question (here, KSTAR) exist (e.g. pressure profile peaking, high-accuracy pitch angle data, compensated low frequency toroidal mode number n = 1 mode measurement) to create a primarily physics-based disruption forecasting capability, and (3) Addressing disruption avoidance for the first time in KSTAR by attacking primary disruption ‘event chains’, utilizing the most important associated plasma measurements (dynamic n = 1 field). The focus of this work will be avoidance of macroscopic instabilities, especially global modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗