Search NASA⌕ Search

Engineering topics

Marsh, H. E., Jr.

Publications and source records attributed to Marsh, H. E., Jr..

14 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Solid propellant motor

A case bonded end burning solid propellant rocket motor is described. A propellant with sufficiently low modulus to avoid chamber buckling on cooling from cure and sufficiently high elongation to sustain the stresses induced without cracking is used. The propellant is zone cured within the motor case at high pressures equal to or approaching the pressure at which the motor will operate during combustion. A solid propellant motor with a burning time long enough that its spacecraft would be limited to a maximum acceleration of less than 1 g is provided by one version of the case bonded end burning solid propellant motor of the invention.

Shafer, J. I.↗
NASA NTRS1977

Aldehyde-containing urea-absorbing polysaccharides

A novel aldehyde containing polymer (ACP) is prepared by reaction of a polysaccharide with periodate to introduce aldehyde groups onto the C2 - C3 carbon atoms. By introduction of ether and ester groups onto the pendant primary hydroxyl solubility characteristics are modified. The ACP is utilized to absorb nitrogen bases such as urea in vitro or in vivo.

Mueller, W. A.↗
NASA NTRS1977

Oil and fat absorbing polymers

A method is described for forming a solid network polymer having a minimal amount of crosslinking for use in absorbing fats and oils. The polymer remains solid at a swelling ratio in oil or fat of at least ten and provides an oil absorption greater than 900 weight percent.

Marsh, H. E., Jr.↗
NASA NTRS1976

Prediction of crosslink density of solid propellant binders

A quantitative theory is outlined which allows calculation of crosslink density of solid propellant binders from a small number of predetermined parameters such as the binder composition, the functionality distributions of the ingredients, and the extent of the curing reaction. The parameter which is partly dependent on process conditions is the extent of reaction. The proposed theoretical model is verified by independent measurement of effective chain concentration and sol and gel fractions in simple compositions prepared from model compounds. The model is shown to correlate tensile data with composition in the case of urethane-cured polyether and certain solid propellants. A formula for the branching coefficient is provided according to which if one knows the functionality distributions of the ingredients and the corresponding equivalent weights and can measure or predict the extent of reaction, he can calculate the branching coefficient of such a system for any desired composition.

Marsh, H. E., Jr.↗
NASA NTRS1975

New urea-absorbing polymers for artificial kidney machines

Etherified polymer is made from modified cellulose derivative which is reacted with periodate. It will absorb 2 grams of urea per 100 grams of polymer. Indications are that polymers could be used to help remove uremic wastes in artificial kidneys, or they could be administered orally as therapy for uremia.

Mueller, W. A.↗
NASA NTRS1974

Polymers used to absorb fats and oils: A concept

One approach to problem of excessive oils and fats is to develop method by which oil is absorbed into solid mixture for elimination as solid waste. Materials proposed for these purposes are cross-linked (network) polymers that have high affinity for aliphatic substances, i. e., petroleum, animal, and vegetable oils.

Marsh, H. E., Jr.↗
NASA NTRS1973

Lipid-absorbing Polymers

The removal of bile acids and cholesterol by polymeric absorption is discussed in terms of micelle-polymer interaction. The results obtained with a polymer composed of 75 parts PEO and 25 parts PB plus curing ingredients show an absorption of 305 to 309%, based on original polymer weight. Particle size effects on absorption rate are analyzed. It is concluded that crosslinked polyethylene oxide polymers will absorb water, crosslinked polybutadiene polymers will absorb lipids; neither polymer will absorb appreciable amounts of lipids from micellar solutions of lipids in water.

Marsh, H. E., Jr.↗
NASA NTRS1972

New type of trifunctional alcohol

New type of trifunctional alcohol was synthesized from commercially available trimer acid. Trifunctional alcohol is hydrocarbon with widely separated terminal hydroxyl groups, and was expressly developed as crosslinking agent for preparation of polyurethane propellants, binders and case liners.

Marsh, H. E., Jr.↗
NASA NTRS1972

Solid propellants.

The basic principles underlying propulsion by rocket motor are examined together with the configuration of a solid propellant motor. Solid propellants and their preparation are discussed, giving attention to homogeneous propellants, composite propellants, energetic considerations in choosing a solid propellant, the processing of composite propellants, and some examples of new developments. The performance of solid propellants is investigated, taking into account characteristics velocity, the specific impulse, and performance calculations. Aspects of propellant development considered include nonperformance requirements for solid propellants, the approach to development, propellant mechanical properties, and future trends.

Marsh, H. E., Jr.↗
NASA NTRS1969

Trifunctional alcohol

New trifunctional alcohol derived from trimer acid and novel method of preparation

Hutchison, J. J.↗