Search NASA⌕ Search

Engineering topics

Martin, Richard L

Publications and source records attributed to Martin, Richard L.

Covalency in Metal-Oxygen Multiple Bonds Evaluated Using Oxygen K-edge Spectroscopy and Electronic Structure Theory

Advancing theories of how metal–oxygen bonding influences metal oxo properties can expose new avenues for innovation in materials science, catalysis, and biochemistry. Historically, spectroscopic analyses of the transition metal MO 4 x– anions have formed the basis for new M–O bonding theories. Herein, relative changes in M–O orbital mixing in MO 4 2– (M = Cr, Mo, W) and MO 4 – (M = Mn, Tc, Re) are evaluated for the first time by nonresonant inelastic X-ray scattering, X-ray absorption spectroscopy using fluorescence and transmission (via a scanning transmission X-ray microscope), and time-dependent density functional theory. The results suggest that moving from Group 6 to Group 7 or down the triads increases M–O e* (π*) mixing; for example, it more than doubles in ReO 4 – relative to CrO 4 2– . Mixing in the t2* orbitals (σ* + π*) remains relatively constant within the same Group, but increases on moving from Group 6 to Group 7. These unexpected changes in orbital energy and composition for formally isoelectronic tetraoxometalates are evaluated in terms of periodic trends in d orbital energy and radial extension.

Minasian, Stefan G↗

Spin-Orbit Coupling in Actinide Cations

The limiting case of Russell-Saunders coupling, which leads to a maximum spin alignment for the open shell electrons, usually explains the properties of high spin ionic crystals with transition metals. For actinide compounds, the spin-orbit splitting is large enough to cause a significantly reduced spin alignment. Novel concepts are used to explain the dependence of the spin alignment on the 5f shell occupation. We present evidence that the XPS of ionic actinide materials may provide direct information about the angular momentum coupling within the 5f shell.

Bagus, Paul S↗

Experimental and Theoretical Comparison of the O K-Edge Nonresonant Inelastic X-ray Scattering and X-ray Absorption Spectra of NaReO[subscript 4]

Accurate X-ray absorption spectra (XAS) of first row atoms, e.g., O, are notoriously difficult to obtain due to the extreme sensitivity of the measurement to surface contamination, self-absorption, and saturation affects. Herein, we describe a comprehensive approach for determining reliable O K-edge XAS data for ReO{sub 4}{sup 1-} and provide methodology for obtaining trustworthy and quantitative data on nonconducting molecular systems, even in the presence of surface contamination. This involves comparing spectra measured by nonresonant inelastic X-ray scattering (NRIXS), a bulk-sensitive technique that is not prone to X-ray self-absorption and provides exact peak intensities, with XAS spectra obtained by three different detection modes, namely total electron yield (TEY), fluorescence yield (FY), and scanning transmission X-ray microscopy (STXM). For ReO{sub 4}{sup 1-}, TEY measurements were heavily influenced by surface contamination, while the FY and STXM data agree well with the bulk NRIXS analysis. These spectra all showed two intense pre-edge features indicative of the covalent interaction between the Re 5d and O 2p orbitals. Density functional theory calculations were used to assign these two peaks as O 1s excitations to the e and t{sub 2} molecular orbitals that result from Re 5d and O 2p covalent mixing in T{sub d} symmetry. Electronic structure calculations were used to determine the amount of O 2p character (%) in these molecular orbitals. Time dependent-density functional theory (TD-DFT) was also used to calculate the energies and intensities of the pre-edge transitions. Overall, under these experimental conditions, this analysis suggests that NRIXS, STXM, and FY operate cooperatively, providing a sound basis for validation of bulk-like excitation spectra and, in combination with electronic structure calculations, suggest that NaReO{sub 4} may serve as a well-defined O K-edge energy and intensity standard for future O K-edge XAS studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Upgrading of biorenewables to high energy density fuels

According to a recent report, lignocellulose is the most abundant renewable biological resource on earth, with an annual production of {approx} 200 x 10{sup 9} tons. Conversion of lignocellulosics derived from wood, agricultural wastes, and woody grasses into liquid fuels and value-added chemical feedstocks is an active area of research that has seen an explosion of effort due to the need to replace petroleum based sources. The carbohydrates D-glucose (C{sub 6}), L-arabinose (C{sub 5}), and D-xylose (C{sub 5}) are readily obtained from the hydrolysis of lignocellulose and constitute the most abundant renewable organic carbon source on the planet. Because they are naturally produced on such a large scale, these sugars have the greatest potential to displace petrochemical derived transportation fuel. Recent efforts in our laboratories aimed towards the production of high energy density transportation fuels from carbohydrates have been structured around the parameters of selective carbohydrate carbon chain extension chemistries, low reaction temperatures, and the desired use of water or neat substrate as the solvent. Some of our efforts in this regard will be presented.

09 BIOMASS FUELS↗

Pu electronic structure and photoelectron spectroscopy

The electronic structure of PuCoGa{sub 5}, Pu metal, and PuO{sub 2} is explored using photoelectron spectroscopy. Ground state electronic properties are inferred from temperature dependent photoemission near the Fermi energy for Pu metal. Angle-resolved photoemission details the energy vs. crystaJ momentum landscape near the Fermi energy for PuCoGa{sub 5} which shows significant dispersion in the quasiparticle peak near the Fermi energy. For the Mott insulators AnO{sub 2}(An = U, Pu) the photoemission results are compared against hybrid functional calculations and the model prediction of a cross over from ionic to covalent bonding is found to be reasonable.

36 MATERIALS SCIENCE↗

Trends in Covalency for d- and f-Element Metallocene Dichlorides Identified Using Chlorine K-Edge X-Ray Absorption Spectroscopy and Time Dependent-Density Functional Theory

We describe the use of Cl K-edge X-ray Absorption Spectroscopy (XAS) and both ground state and time-dependent hybrid density functional theory (DFT) to probe electronic structure and determine the degree of orbital mixing in M-Cl bonds for (C5Me5)2MCl2 (M = Ti, 1; Zr, 2; Hf, 3; Th, 4; and U, 5), where we can directly compare a class of structurally similar compounds for d- and f-elements. We report direct experimental evidence for covalency in M-Cl bonding, including actinides, and offer insight into the relative roles of the valence f- and dorbitals in these systems. The Cl K-edge XAS data for the group IV transition metals, 1 – 3, show slight decreases in covalency in M-Cl bonding with increasing principal quantum number, in the order Ti > Zr > Hf. The percent Cl 3p character per M-Cl bond was experimentally determined to be 25, 23, and 22% per M-Cl bond for 1-3, respectively. For actinides, we find a shoulder on the white line for (C5Me5)2ThCl2, 4, and distinct, but weak pre-edge features for 2 (C5Me5)2UCl2, 5. The percent Cl 3p character in Th-Cl bonds in 4 was determined to be 14 %, with high uncertainty, while the U-Cl bonds in 5 contains 9 % Cl 3p character. The magnitudes of both values are approximately half what was observed for the transition metal complexes in this class of bent metallocene dichlorides. Using the hybrid DFT calculations as a guide to interpret the experimental Cl K-edge XAS, these experiments suggest that when evaluating An- Cl bonding, both 5f- and 6d-orbitals should be considered. For (C5Me5)2ThCl2, the calculations and XAS indicate that the 5f- and 6d-orbitals are nearly degenerate and heavily mixed. In contrast, the 5f- and 6d-orbitals in (C5Me5)2UCl2 are no longer degenerate, and fall in two distinct energy groupings. The 5f-orbitals are lowest in energy and split into a 5-over-2 pattern with the high lying U 6d-orbitals split in a 4-over-1 pattern, the latter of which is similar to the dorbital splitting in group IV transition metal (C5R5)2MCl2 (R = H, Me) compounds. Time dependent-DFT (TD-DFT) was used to calculate the energies and intensities of Cl 1s transitions into empty metal based orbitals containing Cl 3p character, and provide simulated Cl K-edge XAS spectra for 1 - 4. However, for 5, which has two unpaired electrons, analogous information was obtained from transition dipole calculations using ground state Kohn-Sham orbitals. The simulations provide additional confidence in the interpretation of spectra based on ground state calculations. Overall, this study demonstrates that Cl K-edge XAS and DFT calculations represent powerful tools that can be used to evaluate electronic structure and covalency in actinide metal-ligand bonding. In addition, these results provide a framework that can be used in future studies to evaluate actinide covalency in compounds that contain transuranic elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interfacial electron transfer dynamics of ru(II)-polypy6ridine sensitized TiO2

Quantum dynamics simulations combined with density functional theory calculations are applied to study interfacial electron transfer (IET) from pyridine-4-phosphonic acid, [Ru(tpy)(tpy(PO{sub 3}H{sub 2}))]{sup 2+} and [Ru(tpy)(bpy)(H{sub 2}O)-Ru(tpy)(tpy(PO{sub 3}H{sub 2}))]{sup 4+} into the (101) surface of anatase TiO{sub 2}. IET rate from pyridine-4-phosphonic acid attached to the nanoparticle in bidentate mode ({tau} {approx} 100 fs) is an order of magnitude faster than the IET rate of the adsorbate attached in the monodentate mode ({tau} {approx} 1 ps). Upon excitation with visible light, [Ru(tpy)(tpy(PO{sub 3}H{sub 2}))]{sup 2+} attached to TiO{sub 2} in bidentate binding mode will undergo IET with the rate of {approx} 1-10 ps, which is competitive with the excited state decay into the ground state. The probability of electron injection from [Ru(tpy)(bpy)(H{sub 2}O)-Ru(tpy)(tpy(PO{sub 3}H{sub 2}))]{sup 4+} is rather low, as the excitation with visible light localizes the excited electron in the tpy-tpy bridge, which does not have favorable coupling with the TiO{sub 2} nanoparticle. The results are relevant to better understanding of the adsorbate features important for promoting efficient interfacial electron transfer into the semiconductor.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

5f band dispersion in epitaxial films of UO2

Polymer-assisted deposition of epitaxial films utilizes lattice pinning to produce films of very high stability and properties identical with bulk crystal. Dispersion of the 5f band is shown for the first time in a actinide Mott insulator system, which suggestes hybridization as a leading process in establishing the electronic structure. Hybrid density functional is succesfully employed to calculate the electronic structure of UO{sub 2} in agreement with experiments. UO{sub 2} continues to be a mysterious and elusive compound in terms of understanding the physical properties of a material. Most actinide oxides, including UO{sub 2} are predicted to be metallic. However, UO{sub 2} is an antiferromagnetic insulator with a relatively large gap of about 2eV. The f orbital charater of the excitations across the gap places UO{sub 2} in a Mott insulator category, but no states at the gap center have ever been measured directly, in spite of intensive efforts. In this work we present the first results of the electronic structure investigation of a epitaxial film of UO{sub 2}, where we find even more unexpected properties, like the dispersive nature of 5f bands. We also demonstrate the unexpected, very high stability of the epitaxial film of UO{sub 2}. In the lattice-pinning scheme, the crystalline nature of the film is preserved all the way up to the topmost layers even after prolonged exposure to atmospheric conditions. Hybridized, dispersive bands are common in the itinerant uranium compounds. One usually finds hybridization of f-orbitals with conduction band to be quite common in f-electron systems at low temperatures. Such bands may reside in the vicinity of the Fermi level and participate in the construction of the Fermi surface. However, in the insulator like UO{sub 2}, one expects a more atomic band nature, where f-bands are relatively flat and shifted away from the Fermi level by the gap energy scale. Precise location of UO{sub 2} on the localization-delocalization axis could be pinned down by measurements of band dispersion.

36 MATERIALS SCIENCE↗