Search NASA⌕ Search

Engineering topics

Martinez, Jayson J.

Publications and source records attributed to Martinez, Jayson J..

17 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Arctic Deployment of a Fully Integrated Self-Powered Drifting Buoy Harvesting Wave Energy via a Triboelectric Nanogenerator

The Arctic Ocean remains one of the most poorly sampled regions on Earth, where improved in situ environmental monitoring is vital for advancing oceanographic and atmospheric studies. However, data collection efforts are constrained by the short operational lifespans and high costs of conventional systems. Drifting buoys powered by pendulum-driven wave energy harvesters offer a cost-effective alternative, yet earlier designs have neither been optimized for real-world wave conditions nor validated in the Arctic. In this study, we develop a self-powered drifting buoy that integrates a pendulum-driven triboelectric nanogenerator (TENG) system with a mechanical motion rectifier, a high-gear-ratio transmission, and power management circuits. Through coupled buoy–pendulum dynamic simulations and laboratory testing using a motion simulator, we identify an optimal pendulum mass of 1.6 kg (12.7% of total buoy weight) that maximizes energy output while maintaining buoy stability. Laboratory experiments achieved average power outputs of 12.7 mW under Arctic-like wave and temperature conditions. The system was successfully deployed in the Bering Sea, where it generated 11 J of energy in 3.1 m waves, marking the first Arctic deployment of a TENG-based drifting buoy for sea surface temperature monitoring. This work establishes a cost-effective framework for designing self-powered Arctic monitoring platforms and advances the feasibility of long-term environmental observations in real Arctic waters.

marine enerby↗
DOE OSTI2024

Sensor assemblies and methods for emulating interaction of entities within water systems

Methods for emulating interaction of entities within water systems are provided. The methods can include introducing a sensor assembly into a water system. The sensor assembly can include: a circuit board supporting processing circuitry components on either or both of opposing component support surfaces of the circuit board; a housing about the circuit board and the components, the housing being circular about the circuit board in at least one cross section; and wherein the support surfaces of the circuit board are substantially parallel with the plane of the housing in the one cross section.

Deng, Z. Daniel↗
DOE OSTI2024

Environmental Monitoring and Risk Assessment for Marine Energy Systems

There is a growing interest in marine energy development around the world, but the industry is still in its early stages, with only a limited number of small-scale deployments thus far. One significant challenge lies in understanding and mitigating the potential environmental impact of deploying and operating marine energy systems on aquatic animals. To address these challenges, many monitoring technologies and risk assessment tools have been developed or are currently in development. This chapter delves into these technologies, such as biotelemetry, passive acoustic monitoring, active sonars, and autonomous sensors, to underscore their significant and practical applications.

Deng, Zhiqun↗
DOE OSTI2024

Mercury Detection Utilizing an Aquatic Animal as a Remote-Sensing Platform

Mercury species in open water, especially the accumulated methylmercury ion, pose a threat to fish and environment. Therefore, it is important to develop a small sensor package that can be integrated into a biotelemetry sensor carried by an aquatic animal, enhancing the ability to detect mercury contamination in large water areas. A quartz crystal microbalance (QCM) sensor using metal-organic framework (MOF) as sensing material was developed to detect mercury and methylmercury ions in real time based on acoustic wave perturbation. Thiol groups were introduced into the MOF UiO-66 through the organic linker to prepare the UiO-66-SH which was confirmed by infrared spectroscopy results. Batch adsorption experiments were conducted for the Hg 2+ , CH 3 Hg + , and Ca 2+ ions adsorption in the UiO-66-SH. The adsorption capacities of the mercury ions were more than an order of magnitude higher than those of the competing Ca 2+ ions at the same concentration. The frequency changes of the QCM sensor with the UiO-66-SH sensing film were an order of magnitude higher than those of the controlled baseline QCM sensor without a sensing film. Additionally, the frequency change can be tailored by adjusting the thickness of the MOF film and the adsorption properties of the sensing material. The sensor frequency change correlates well with ion adsorption capacities.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Development of optimal methods for collection, transportation, holding, handling, and tagging of juvenile American shad

American shad (Alosa sapidissima) are an anadromous fish species native to the United States that have an extensive range along the east coast, but their populations are declining worldwide. Acoustic telemetry can play a vital role in better understanding the behavior and survival of this sensitive species. A stepwise, systematic approach was used to assess juvenile shad survival during multiple stressors typically associated with an acoustic telemetry study. Minimizing out-of-water handling and the use of saltwater during collection increased 24-hour survival (78 to 99%) between the first two shad transports. Several experiments were conducted to determine the best transmitter design method for implanting juvenile shad. Saltwater was fundamental in keeping tagged shad alive overnight and during the tagging process. Shad as small as 50 mm were tagged using the pectoral incision method with no suture. In a 60-d holding evaluation, tagged fish survived at a comparable rate as their non-tagged counterparts (81.5% for tagged, 70% for untagged). Also, when tagged and untagged shad were exposed to a tank of predators, there was no difference in their survival. Results from this study are encouraging for improving conservation efforts for small, sensitive species of fish, like American shad. The techniques identified may help broaden the application of telemetry studies by informing researchers of optimal methods to ensure survival of tagged fish in future field studies looking to evaluate survival and entrainment rates of juvenile American shad.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Self-powered ocean buoy using a disk-type triboelectric nanogenerator with a mechanical frequency regulator

Triboelectric nanogenerator (TENG) systems have been demonstrated to generate power with high density. However, the electrical output power obtained from wave energy harvesting using TENG systems is typically limited to several milliwatts. To address this limitation and support various ocean buoy systems, an efficient method to scale-up TENG systems is required. In this paper, we present a self-powered ocean buoy (SPOB) incorporating a disk-type, soft-contact, mechanical frequency regulator TENG (DSMFR-TENG). The mechanical frequency regulator (MFR) enables the conversion of low-frequency wave energy to high-speed mechanical rotation, facilitating high power generation with the disk-type TENG. Here, the SPOB was tested in a wave tank, reaching a peak power output of 470 mW and an average power output of 130 mW after the MFR released the rotational energy. To further enhance the functionality of the buoy, the DSMFR-TENG and a microcontroller, temperature sensor, and acoustic transmitter were integrated with the SPOB. The acoustic transmitter successfully transmitted signals 7, 23, and 30 times over a one-minute period at wave frequencies of 0.33 Hz, 0.5 Hz, and 1 Hz, respectively, thereby demonstrating the power supply capability of the TENG system for ocean buoys.

42 ENGINEERING↗
DOE OSTI2023

Systems and methods for monitoring organisms within an aquatic environment

Systems and methods for monitoring organisms within an aquatic environment are described. According to one aspect, an injectable acoustic transmission device includes a body configured to be injected inside of an organism, a transducer within the body and configured to convert a plurality of electrical signals into a plurality of data transmissions which are transmitted externally of the body and the organism, a plurality of circuit components within the body and configured to use electrical energy from a power source to generate the electrical signals which are provided to the transducer, and wherein the transducer defines an internal volume and at least one of the circuit components is provided within the internal volume of the transducer.

Deng, Z. Daniel↗
DOE OSTI2023

Balloon Tag Manufacturing Technique for Sensor Fish and Live Fish Recovery

Fish may experience injuries and mortality when they pass through hydraulic conveyances at hydropower dams, even if these conveyances are designed to be fish-friendly, such as downstream bypass systems, modified spillways and turbines. The main methods used to study fish passage conditions in hydraulic structures involve direct, in situ testing using Sensor Fish technology and live fish. Sensor Fish data helps identify physical stressors and their locations in the fish passage environment, while live fish are assessed for injuries and mortality. Balloon tags, which are self-inflating balloons attached externally to Sensor Fish and live fish, aid in their recovery after passing through hydraulic structures. This article focuses on the development of balloon tags with varying numbers of dissolvable, vegetable-based capsules containing a mixture of oxalic acid, sodium bicarbonate powders, and water at two different temperatures. Our research determined that balloon tags with three capsules, injected with 5 mL of water at 18.3 °C, consistently achieved the desired balloon volume. These tags had a mean inflation volume of 114 cm 3 with a standard deviation of 1.2 cm 3 . Among the balloon tags injected with water at 18.3 °C, it was observed that the two-capsule balloon tags took the longest time to reach full inflation. In addition, the four-capsule balloon tags demonstrated a faster inflation start time, while the three-capsule balloon tags demonstrated a faster deflation start time. Overall, this approach proves to be effective for validating the performance of new technologies, improving turbine design, and making operational decisions to enhance fish passage conditions. Importantly, it serves as a valuable tool for research and field evaluations, aiding in the refinement of both the design and operation of hydraulic structures.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Self-Powered Autonomous Sensing System for Arctic Ocean using a Frequency-multiplied Cylindrical Triboelectric Nanogenerator

An autonomous sensing system for collecting environmental observations in the Arctic region is critical for the estimation and prediction of climate change. Ocean waves are a great source of energy for these sensing systems but there has been limited research done on small-scale energy harvesting applications in the Arctic Ocean (subsea or surface). The available wave energy in the Arctic Ocean is lower than the typical ocean wave energy due to the low wave frequency, height, and operating months. Although the available wave energy depends on the specific location in the Arctic Ocean, the wave height decreases everywhere during the winter (Jan-March) [1]. Our target location in this work is the Beaufort and Chukchi Seas, which are ice covered for about 195 days per year leaving only a few months (June-November) for wave energy harvesting [2]. During these few months, the average wave frequency is 0.2 Hz and the most common wave frequency is around 0.15 Hz. Many energy harvesting methods are unsuitable for use in the Arctic Ocean because of to the cold temperature, low wave frequency, and low wave height. Triboelectric nanogenerators (TENG) are one of the few energy harvesting methods that excel in these conditions. Zhong et al. [3] designed a stacked pendulum-structured TENG for low-frequency ocean wave energy and reported the device generated a peak power density of 11.2 W/m3 under the low wave frequency of 0.2 Hz. The autonomous sensing system we developed for the Arctic Ocean, the Arctic-TENG, is based on a frequency-multiplied cylindrical TENG (FMC-TENG) which is an optimized TENG configuration for Arctic Ocean conditions due to the high power density under low-frequency wave conditions [4]. Figure 1 shows an FMC-TENG with multiple pairs of free-standing triboelectric-layer mode materials (Aluminum and FEP). The mass and magnet attached to the rotor store gravitational potential energy which is released as kinetic energy when the potential energy overcomes the repulsive magnetic force generated by the opposing magnet attached to the stator. This force unbalance triggers a sudden rotation and swinging motion of the mass which increases the angular velocity of the system and therefore enhances the output power of the TENG system. The main components of the Arctic-TENG are a 3D-printed rotor and stator, electric and dielectric material adhesive tape, and bearings. All these materials were cold-soaked and tested at -40 °C in a chest freezer. Both the 3D-printed parts and adhesives were confirmed to have a minimal effect from the cold temperature. Multiple bearings were tested and the starting torque of each one was compared both at room temperature and -40 °C. The bearing with the lowest starting torque at -40 °C was selected for use in the Arctic-TENG. The Arctic-TENG was tested using an out-of-water motor-driven wave simulator (Figure 2). The wave simulator allows for controlled testing at a wave height of 0.2 m and frequencies between 0.1 Hz to 0.5 Hz. This wave simulator was used for both room temperature and -40 °C testing. The Arctic-TENG generated significantly more power at -40 °C compared to room temperature for each frequency tested. The system stored energy in a supercapacitor via a power management circuit, and the amount of energy stored per day was calculated at different wave frequencies. Based on the conditions at the proposed deployment location (days of non-ice-covered ocean and wave frequency), the amount of stored energy per year from Arctic-TENG was calculated to be enough energy for two transmissions every day. Durability testing was completed on the Arctic-TENG at room temperature to determine the lifetime. The rotor of the Arctic-TENG was attached to a DC motor and spun continuously for several millions of cycles without degradation of the electrical output, demonstrating the feasibility for long-term operation.

Jung, Hyunjun↗
DOE OSTI2023

Towards assessing the impact of anthropogenic sound on fishes: Gaps, perspectives, and a case study of a large floating bridge

Underwater anthropogenic sound can cause physical, physiological, and behavioral impacts on fishes. With the development of marine energy facilities, the impact of man-made underwater sound on fishes has become a growing regulatory concern. Large gaps remain in how to perform an underwater sound assessment. Such gaps mainly reside in scientific evidence, regulatory criteria, sound characterization metrics, sound field modeling, and instrumentation for field measurement. Here, this paper reviewed existing work on underwater sound assessment for fishes to identify critical gaps and provide perspectives on how to deal with these gaps, demonstrated with a case study on the impact of the Hood Canal Bridge traffic sound on migrating steelhead smolts in Washington State, U.S. We also provide perspectives on future research directions to bridge the identified gaps for aquatic ecological assessment.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

A New Miniaturized Acoustic Transmitter for Marine Animal Tracking

Most marine renewable energy (MRE) technologies are still in their infancy. Many uncertainties remain regarding MRE systems’ impacts on the marine environment and species where they are deployed, which is one of the major hurdles for these systems to be widely adopted at a commercial scale. Currently, the primary technologies to monitor marine animals’ behavior around existing or potential MRE deployment sites are optical and acoustic imaging. However, these methods cannot identify individual animals and thus are less useful in identifying protected species and studying their behavior. Implantable acoustic transmitters with unique identification codes could serve as a complementary technology. To minimize potential bias introduced to the study results, the implanted transmitters must be sufficiently small and light to not affect the animals’ behavior while still having acceptable signal strengths and service life. Recently, we developed a new miniaturized acoustic transmitter that offers a significantly improved signal strength and service life (140 days [projected value] at a 5-s transmission interval) in a smaller and lighter package (0.45 g in the air), compared to the existing technologies. The detection range and detection efficiency of the new transmitter were tested in an actual marine environment and demonstrated a detection range of up to 330 m, a 65% improvement over the existing commercial counterparts operating at similar frequencies. Here, we report the design principles, performance, and manufacturing procedure of the transmitter. Finally, theoretical estimates of the detection range, the actual range, and detection efficiency results from the field testing are presented.

acoustic telemetry↗
DOE OSTI2022

Sensor assemblies and methods for emulating interaction of entities within water systems

Sensor assemblies are provided for use in modeling water systems. These sensor assemblies can be used as sensor fish. These assemblies can include a circuit board supporting processing circuitry components on either or both opposing component support surfaces of the circuit board and a housing above the circuit board and the components, with the housing being circular about the circuit board in at least one cross section, and wherein the supporting surfaces of the circuit board are substantially parallel with the plane of the housing in the one cross section. Methods for emulating interaction of entities within water systems are provided. The methods can include introducing a sensor assembly into a water system. The sensor assembly can include: a circuit board supporting processing circuitry components on either or both of opposing component support surfaces of the circuit board; a housing about the circuit board and the components, the housing being circular about the circuit board in at least one cross section; and wherein the support surfaces of the circuit board are substantially parallel with the plane of the housing in the one cross section.

Deng, Z. Daniel↗
DOE OSTI2022

Aquatic organism tracking devices, systems and associated methods

Aquatic organism tracking devices, systems and associated methods are described. According to one aspect, an aquatic organism tracking device includes a housing, a transducer coupled with the housing and configured to transmit a data transmission externally of the housing and an aquatic organism associated with the tracking device, a programmable oscillator coupled with the housing, and wherein the programmable oscillator is configured to generate a clock signal having a selected one of a plurality of different frequencies, processing circuitry coupled with the housing and configured to receive the clock signal from the programmable oscillator and to execute a plurality of executable instructions according to the clock signal, a power source coupled with the housing and configured to store electrical energy, and wherein the processing circuitry is configured to control the provision of the electrical energy from the power source to the transducer to generate the data transmission as a result of the execution of the instructions.

Deng, Z. Daniel↗
DOE OSTI2022

Transmitters for animals and methods for transmitting from animals

Animal transmitters are provided that can include: a transducer configured to transmit a signal; process circuitry coupled to the transducer; and an energy harvesting element coupled to the process circuitry. Animals having a transmitter coupled thereto are also provided with the transmitter including an energy harvesting element in operational alignment with the animal's musculoskeletal system. Methods for transmitting the location of an animal are also provided with the methods including: coupling a transmitter powered by an energy harvesting element to the animal; and monitoring the transmissions of the transmitter.

Deng, Z. Daniel↗
DOE OSTI2022

An Acoustic Transmitter with Intelligent ON/OFF Mechanisms and Quasi-location Awareness

We successfully demonstrated an acoustic transmitter with intelligent ON/OFF mechanisms and quasi-location awareness. The prototype transmitter has (1) the ability (radio frequency-enabled ON/OFF) to turn the tag on and off when it passes through a passive integrated transponder antenna and (2) the ability to detect significant salinity changes (i.e. from freshwater to sea water and vice versa) and turn itself off and on, respectively. Such a device would greatly enhance the capabilities of the acoustic telemetry-based fish tracking systems.

Deng, Zhiqun↗
DOE OSTI2022

Extracting energy from ocean thermal and salinity gradients to power unmanned underwater vehicles: State of the art, current limitations, and future outlook

Thermal gradient energy-generation technologies for powering unmanned underwater vehicles (UUVs) or autonomous sensing systems in the ocean are mainly in the research development phase or commercially available at a limited scale, and salinity-gradient energy-generation technologies have not been adequately researched yet. The demand for self-powered UUVs suitable for long-term deployments has been growing, and further research related to small-scale ocean gradient energy systems is needed. In this study, we conducted a comprehensive review about harvesting energy from ocean thermal or salinity gradients for powering UUVs, focusing on gliders and profiling floats. Thermal gradient energy systems for UUVs based on phase change materials (PCM) cannot provide the energy required for powering autonomous sensing systems because of the systems' low energy conversion efficiency. Besides reducing energy consumption by developing more efficient electrical-mechanical systems, enhancing the thermal conductivity of the PCMs may help address this challenge by increasing the power generation rate of the UUVs. Several other emerging technologies, such as thermoelectric generators, shape memory alloys, and small-scale thermodynamic cycle systems, have shown potential for powering UUVs, but they are still only at the laboratory testing or conceptual design phase. The most advanced power generation technologies based on salinity gradients, reverse electrodialysis and pressure-retarded osmosis, are still not economically viable for large-scale deployment, mainly because of the high cost of the components required to operate in harsh saline environments. Our feasibility evaluation showed that existing salinity gradient power generation technologies are not directly feasible for powering UUVs in the open ocean.

16 TIDAL AND WAVE POWER↗