Engineering topics

Martini, P. (ORCID:0000000201944017)

Publications and source records attributed to Martini, P. (ORCID:0000000201944017).

7 records

DOE OSTI2025

GD-1 Stellar Stream and Cocoon in the DESI Early Data Release

We present ∼115 new spectroscopically identified members of the GD-1 tidal stream observed with the 5000-fiber Dark Energy Spectroscopic Instrument (DESI). We confirm the existence of a “cocoon,” which is a broad (FWHM ∼ 2:932 ∼ 460 pc) and kinematically hot (velocity dispersion, σ ∼ 5–8 km s −1 ) component that surrounds a narrower (FWHM ∼ 0:353 ∼ 55 pc) and colder [(σ = 3.09 ± 0.76 km s −1 )] thin stream component (based on a median per star velocity precision of 2.7 km s −1 ). The cocoon extends over at least a 30 ∘ segment of the stream observed by DESI. The thin and cocoon components have similar mean values of [Fe/H]: −2.54 ± 0.04 dex and −2.47 ± 0.06 dex, suggestive of a common origin. The data are consistent with the following scenarios for the origin of the cocoon. The progenitor of the GD-1 stream was an accreted globular cluster (GC) and: (a) the cocoon was produced by pre-accretion tidal stripping of the GC while it was still inside its parent dwarf galaxy; (b) the cocoon comprises debris from the parent dwarf galaxy; (c) an initially thin GC tidal stream was heated by impacts from dark subhalos in the Milky Way; (d) an initially thin GC stream was heated by a massive Sagittarius dwarf galaxy; or a combination of some of these. Future DESI spectroscopy and detailed modeling may enable us to distinguish between these possible origins.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Correcting Turbulence-induced Errors in Fiber Positioning for the Dark Energy Spectroscopic Instrument

Highly multiplexed, robotic, fiber-fed spectroscopic surveys are observing tens of millions of stars and galaxies. For many systems, accurate positioning relies on imaging the fibers in the focal plane and feeding that information back to the robotic positioners to correct their positions. Inhomogeneities and turbulence in the air between the focal plane and the imaging camera can affect the measured positions of fibers, limiting the accuracy with which fibers can be placed on targets. For the Dark Energy Spectroscopic Instrument, we dramatically reduced the effect of turbulence on measurements of positioner locations in the focal plane by taking advantage of stationary positioners and the correlation function of the turbulence. We were able to reduce positioning errors from 7.3 to 3.5 μm, speeding the survey by 1.6% under typical conditions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2024

Overview of the Fiber System for the Dark Energy Spectroscopic Instrument

The Dark Energy Spectroscopic Instrument (DESI) is a revolutionary instrument designed for precise measurements of cosmic distances and the investigation of dark energy. DESI utilizes 5000 optical fibers to simultaneously measure the spectra of distant objects and aims to measure 40 million galaxies and quasars in a 5 yr survey. One of the critical challenges to DESI's success was ensuring that the fiber system was not only highly efficient but also delivered a highly stable beam enabling more reliable sky subtraction for measurements of faint objects. We achieved this stability by minimizing the stress on the fiber system during the manufacture and operation of the telescope and fiber positioning robots. We installed the DESI fiber system on the 4 m Mayall telescope with ≥99% of fibers intact, and the instrument has delivered superb optical performance throughout the initial years of the DESI survey, including ≥90% average throughput when injected with a focal ratio of ~f/3.9 as delivered by the primary focus corrector, excluding fiber absorption losses. The design of DESI required multiple innovations to achieve these requirements, such as cleaved fibers bonded with a UV-curing epoxy to glass ferrules in the focal plane and fusion splicing instead of physical connectors. In this paper, we describe the development, delivery, and installation of the fiber system, the innovations that made the state-of-the-art performance possible, and the key lessons learned that could benefit future projects.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

The Dark Energy Survey: Cosmology Results with ∼1500 New High-redshift Type Ia Supernovae Using the Full 5 yr Data Set

Abstract We present cosmological constraints from the sample of Type Ia supernovae (SNe Ia) discovered and measured during the full 5 yr of the Dark Energy Survey (DES) SN program. In contrast to most previous cosmological samples, in which SNe are classified based on their spectra, we classify the DES SNe using a machine learning algorithm applied to their light curves in four photometric bands. Spectroscopic redshifts are acquired from a dedicated follow-up survey of the host galaxies. After accounting for the likelihood of each SN being an SN Ia, we find 1635 DES SNe in the redshift range 0.10 < z < 1.13 that pass quality selection criteria sufficient to constrain cosmological parameters. This quintuples the number of high-quality z > 0.5 SNe compared to the previous leading compilation of Pantheon+ and results in the tightest cosmological constraints achieved by any SN data set to date. To derive cosmological constraints, we combine the DES SN data with a high-quality external low-redshift sample consisting of 194 SNe Ia spanning 0.025 < z < 0.10. Using SN data alone and including systematic uncertainties, we find Ω M = 0.352 ± 0.017 in flat ΛCDM. SN data alone now require acceleration ( q 0 < 0 in ΛCDM) with over 5 σ confidence. We find ( Ω M , w ) = ( 0.264 − 0.096 + 0.074 , − 0.80 − 0.16 + 0.14 ) in flat w CDM. For flat w 0 w a CDM, we find ( Ω M , w 0 , w a ) = ( 0.495 − 0.043 + 0.033 , − 0.36 − 0.30 + 0.36 , − 8.8 − 4.5 + 3.7 ) , consistent with a constant equation of state to within ∼2 σ . Including Planck cosmic microwave background, Sloan Digital Sky Survey baryon acoustic oscillation, and DES 3 × 2pt data gives (Ω M , w ) = (0.321 ± 0.007, −0.941 ± 0.026). In all cases, dark energy is consistent with a cosmological constant to within ∼2 σ . Systematic errors on cosmological parameters are subdominant compared to statistical errors; these results thus pave the way for future photometrically classified SN analyses.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Measuring Fiber Positioning Accuracy and Throughput with Fiber Dithering for the Dark Energy Spectroscopic Instrument

Highly multiplexed, fiber-fed spectroscopy is enabling surveys of millions of stars and galaxies. The performance of these surveys depends on accurately positioning fibers in the focal plane to capture target light. We describe a technique to measure the positioning accuracy of fibers by dithering fibers slightly around their ideal locations. This approach also enables measurement of the total system throughput and point-spread function delivered to the focal plane. We then apply this technique to observations from the Dark Energy Survey Instrument (DESI), and demonstrate that DESI positions fibers to within 0farcs08 of their targets (5% of a fiber diameter) and achieves a system throughput within about 7% of expectations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2023

Astrometric Calibration and Performance of the Dark Energy Spectroscopic Instrument Focal Plane

Abstract The Dark Energy Spectroscopic Instrument, consisting of 5020 robotic fiber positioners and associated systems on the Mayall telescope at Kitt Peak, Arizona, is carrying out a survey to measure the spectra of 40 million galaxies and quasars and produce the largest 3D map of the universe to date. The primary science goal is to use baryon acoustic oscillations to measure the expansion history of the universe and the time evolution of dark energy. A key function of the online control system is to position each fiber on a particular target in the focal plane with an accuracy of 11 μ m rms 2D. This paper describes the set of software programs used to perform this function along with the methods used to validate their performance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2023

Target Selection and Sample Characterization for the DESI LOW-Z Secondary Target Program

Abstract We introduce the DESI LOW- Z Secondary Target Survey, which combines the wide-area capabilities of the Dark Energy Spectroscopic Instrument (DESI) with an efficient, low-redshift target selection method. Our selection consists of a set of color and surface brightness cuts, combined with modern machine-learning methods, to target low-redshift dwarf galaxies ( z < 0.03) between 19 < r < 21 with high completeness. We employ a convolutional neural network (CNN) to select high-priority targets. The LOW- Z survey has already obtained over 22,000 redshifts of dwarf galaxies ( M * < 10 9 M ⊙ ), comparable to the number of dwarf galaxies discovered in the Sloan Digital Sky Survey DR8 and GAMA. As a spare fiber survey, LOW- Z currently receives fiber allocation for just ∼50% of its targets. However, we estimate that our selection is highly complete: for galaxies at z < 0.03 within our magnitude limits, we achieve better than 95% completeness with ∼1% efficiency using catalog-level photometric cuts. We also demonstrate that our CNN selections z < 0.03 galaxies from the photometric cuts subsample at least 10 times more efficiently while maintaining high completeness. The full 5 yr DESI program will expand the LOW- Z sample, densely mapping the low-redshift Universe, providing an unprecedented sample of dwarf galaxies, and providing critical information about how to pursue effective and efficient low-redshift surveys.

79 ASTRONOMY AND ASTROPHYSICS↗