Search NASA⌕ Search

Engineering topics

Martinson, Alex B.

Publications and source records attributed to Martinson, Alex B..

Antimicrobial coatings

The sequential infiltration synthesis (SIS) and Atomic Layer Deposition (ALD) of metal and/or metal oxides on personal medical equipment (PPE). The deposited metal and/or metal oxides imbues antimicrobial properties to the PPE.

Mane, Anil U.↗

High temperature selective emitters via critical coupling of weak absorbers

Tailoring the emission spectra of a solar thermophotovoltaic emitter away from that of a blackbody, thereby minimizing transmission and thermalization loss in the energy receiver, is a viable approach to circumventing the Shockley-Queisser limit to single junction solar energy conversion. Embodiments allow for radically tuned selective thermal emission that leverages the interplay between two resonant phenomena in a simple planar structure—absorption in weakly-absorbing thin films and reflection in multi-layer dielectric stacks. A virtual screening approach is employed based on Pareto optimality to identify a small number of promising structures for a selective thermal emitter from a search space of millions, several of which approach the ideal values of a step-function selective thermal emitter.

Martinson, Alex B.↗

Titanium Nitride Modified Photoluminescence from Single Semiconductor Nanoplatelets

Titanium nitride (TiN) is an alternative plasmonic material that has the potential for visible and near-infrared optical applications due to its distinct properties. In this work, coupling effects between TiN nanohole array films and nearby excitonic emitters, semiconductor nanoplatelets (NPLs), are investigated using single particle spectroscopy. At the emission wavelength of the NPLs, the local field enhancement close to the surface of the TiN nanohole array films induces an increase in the radiative decay rates of the emitters by a factor of up to 2. This effect diminishes quickly as the distance between the TiN nanohole array films and emitters increases. At short wavelengths where the NPLs are excited, the TiN nanohole array films exhibit lossy dielectric characteristics. Local field modification at these wavelengths leads to a reduced local density of electromagnetic states, and hence the photoluminescence intensity of the emitters. This study shows the potential of TiN as an alternative plasmonic material for optoelectronic and photonic applications, especially in the long wavelength ranges.

36 MATERIALS SCIENCE↗

Substituted lead halide perovskite intermediate band absorbers

Lead halide perovskites have proven to be a versatile class of visible light absorbers that allow rapid access to the long minority carrier lifetimes and diffusion lengths desirable for traditional single-junction photovoltaics. Computational screening identified both Fe- and Co-substituted MAPbBr3 as promising intermediate band candidate materials, and the later films were synthesized via conventional solution-based processing techniques. First-principles density functional theory (DFT) calculations support the existence of intermediate bands upon Co incorporation and enhanced sub-gap absorption, which are confirmed by UV-visible-NIR absorption spectroscopy. The simple tenability combined with steady state and time-resolved PL studies that reveal no sign of self-quenching suggest this class of materials to be promising for intermediate band photovoltaics.

Sampson, Matthew D.↗

Porous electrodes for spectroelectrochemistry and x-ray structure analyses

An electrochemical cell that allows for in-situ structural characterization of amorphous thin film materials during the course of electrolysis using high-energy X-ray scattering (>50 keV). The compact and versatile cell employs a three-electrode configuration and minimizes X-ray scattering contributions from the cell, reference and counter electrodes, as well as the working electrode support. A large surface area working electrode has a physically robust support and is largely transparent to X-rays. This design, which utilizes a three-dimensional working electrode, also greatly improves the intensity and quality of the scattered signal compared to a two-dimensional working electrode. The in-situ cell can be used not only to investigate structural evolution during electrolysis using X-ray scattering (e.g. pair distribution function), but also to perform electrochemical potential-dependent structural analysis by extended X-ray absorption fine structure.

Kwon, Gihan↗

Non-hydrolytic metal oxide films for perovskite halide overcoating and stabilization

A method of protecting a perovskite halide film from moisture and temperature includes positioning the perovskite halide film in a chamber. The chamber is maintained at a temperature of less than 200 degrees Celsius. An organo-metal compound is inserted into the chamber. A non-hydrolytic oxygen source is subsequently inserted into the chamber. The inserting of the organo-metal compound and subsequent inserting of the non-hydrolytic oxygen source into the chamber is repeated for a predetermined number of cycles. The non-hydrolytic oxygen source and the organo-metal compound interact in the chamber to deposit a non-hydrolytic metal oxide film on perovskite halide film. The non-hydrolytic metal oxide film protects the perovskite halide film from relative humidity of greater than 35% and a temperature of greater than 150 degrees Celsius, respectively.

36 MATERIALS SCIENCE↗

Atomic layer epitaxy of hematite on indium tin oxide for application in solar energy conversion

A method to provide an article of manufacture of iron oxide on indium tin oxide for solar energy conversion. An atomic layer epitaxy method is used to deposit an uncommon bixbytite-phase iron (III) oxide (.beta.-Fe.sub.2O.sub.3) which is deposited at low temperatures to provide 99% phase pure .beta.-Fe.sub.2O.sub.3 thin films on indium tin oxide. Subsequent annealing produces pure .alpha.-Fe.sub.2O.sub.3 with well-defined epitaxy via a topotactic transition. These highly crystalline films in the ultra thin film limit enable high efficiency photoelectrochemical chemical water splitting.

14 SOLAR ENERGY↗

Oxygen-free atomic layer deposition of indium sulfide

A method for synthesizing an In(III) N,N'-diisopropylacetamidinate precursor including cooling a mixture comprised of diisopropylcarbodiimide and diethyl ether to approximately -30.degree. C., adding methyllithium drop-wise into the mixture, allowing the mixture to warm to room temperature, adding indium(III) chloride as a solid to the mixture to produce a white solid, dissolving the white solid in pentane to form a clear and colorless solution, filtering the mixture over a celite plug, and evaporating the solution under reduced pressure to obtain a solid In(III) N,N'-diisopropylacetamidinate precursor. This precursor has been further used to develop a novel atomic layer deposition technique for indium sulfide by dosing a reactor with the precursor, purging with nitrogen, dosing with dilute hydrogen sulfide, purging again with nitrogen, and repeating these steps to increase growth.

36 MATERIALS SCIENCE↗

Second Harmonic Generation Studies of Fe(II) Interactions with Hematite (α-Fe2O3)

Iron oxides are a ubiquitous class of compounds that are involved in many biological, geological, and technological processes, and the Fe(III)/Fe(II) redox couple is a fundamental transformation pathway; however, the study of iron oxide surfaces in aqueous solution by powerful spectroscopic techniques has been limited due to "strong absorber problem". In this work, atomic layer deposition (ALD) thin films of polycrystalline alpha-Fe2O3 were analyzed using the Eisenthal chi((3)) technique, a variant of second harmonic generation that reports on interfacial potentials. By determining the surface charge densities at multiple pH values, the point of zero charge was found to be 5.5 +/- 0.3. The interaction of aqueous Fe(II) at pH 4 and in 1 mM NaCl with ALD-prepared hematite was found to be fully reversible and to lead to about 4 times more ferrous iron ions adsorbed per square centimeter than on fused-silica surfaces under the same conditions. The data are consistent with a recently proposed conceptual model for net Fe(II) uptake or release that is underlain by a dynamic equilibrium between Fe(II) adsorbed onto hematite, electron transfer into favorable surface sites with attendant Fe(III) deposition, and electron conduction to favorable remote sites that release and replenish aqueous Fe(II).

Environmental Molecular Sciences Laboratory↗