H2 Wettability, Permeability, and Diffusion
This presentation provides experimental results for H2 wetting, permeability and diffusion with reservoir caprock, reservoir rock, and wellbore cement.
Engineering topics
Publications and source records attributed to Massoudi, Mehrdad.
This presentation provides experimental results for H2 wetting, permeability and diffusion with reservoir caprock, reservoir rock, and wellbore cement.
Additives such as nano-silica and fly ash are widely used in cement and concrete materials to improve the rheology of fresh cement and concrete and the performance of hardened materials and increase the sustainability of the cement and concrete industry by reducing the usage of Portland cement. Therefore, it is important to study the effect of these additives on the rheological behavior of fresh cement. In this paper, we study the pulsating Poiseuille flow of fresh cement in a horizontal pipe by considering two different additives and when they are combined (nano-silica, fly ash, combined nano-silica, and fly ash). To model the fresh cement suspension, we used a modified form of the power-law model to demonstrate the dependency of the cement viscosity on the shear rate and volume fraction of cement and the additive particles. The convection–diffusion equation was used to solve for the volume fraction. After solving the equations in the dimensionless forms, we conducted a parametric study to analyze the effects of nano-silica, fly ash, and combined nano-silica and fly ash additives on the velocity and volume fraction profiles of the cement suspension. According to the parametric study presented here, larger nano-silica content results in lower centerline velocity of the cement suspension and larger non-uniformity of the volume fraction. Compared to nano-silica, fly ash exhibits an opposite effect on the velocity. Larger fly ash content results in higher centerline velocity, while the effect of the fly ash on the volume fraction is not obvious. For cement suspension containing combined nano-silica and fly ash additives, nano-silica plays a dominant role in the flow behavior of the suspension. The findings of the study can help the design and operation of the pulsating flow of fresh cement mortars and concrete in the 3D printing industry.
The dynamics of air (gas) bubbles in a column of cement slurry is examined numerically. The air injected at the bottom of a laboratory-scale column through a porous distributor plate spatially distributes and migrates as a swarm of bubbles throughout the slurry toward the freeboard. The two-phase system of the cement slurry and the air bubbles is modeled using the conservation equations of mass and linear momentum in the framework of the volume-of-fluid (VOF) approach. The cement slurry is modeled using the Herschel–Bulkley and Bingham fluid models. Results show that the mean Sauter diameter and the mean rise velocity of the bubbles decrease with the gas flow rate. Meanwhile, it is found that the rising of the bubbles is controlled by breakup events, along with relatively weak path instabilities of the bubbles resulting in relatively straight trajectories, independent of the gas flow rate. The extent of the yielded region appears larger for the Herschel–Bulkley model compared to the Bingham fluid model (by approximately 10%).
Computed tomography experimental data associated with the submitted manuscript "Migration of air bubbles in a column of cement slurry" by N’dri Arthur Konan, Eilis Rosenbaum, Dustin Crandall, Mehrdad Massoudi. Full description with citation to be updated when manuscript is accepted.
This study compares the rheological properties of several cement slurries of Class H, Class G, and two pozzolan-amended cement recipes. Viscosity measurements were taken on both preconditioned and unconditioned cement slurries. Tests were performed using a dual cylinder viscometer following the recommendations of the American Petroleum Institute (API). It was observed that the effect of conditioning on viscosity increased with the increase of particle size in the comparison of Class G to Class H cement. The addition of fly ash significantly changed how cement would react to conditioning. The unconditioned pozzolan-amended cement slurry’s viscosity decreased with the addition of fly ash, whereas the conditioned pozzolan-amended cement slurry increased with the addition of fly ash.
American Physical Society (APS) March Meeting 2023, Virtual, March 20-22, 2023
In this paper, we study the boundary-layer flow of a Herschel–Bulkley fluid due to a moving plate; this problem has been experimentally investigated by others, where the fluid was assumed to be Carbopol, which has similar properties to cement. The computational fluid dynamics finite volume method from the open-source toolbox/library OpenFOAM is used on structured quad grids to solve the mass and the linear momentum conservation equations using the solver “overInterDyMFoam” customized with non-Newtonian viscosity libraries. The governing equations are solved numerically by using regularization methods in the context of the overset meshing technique. The results indicate that there is a good comparison between the experimental data and the simulations. The boundary layer thicknesses are predicted within the uncertainties of the measurements. The simulations indicate strong sensitivities to the rheological properties of the fluid.
Reactive transport modelling consists of computational and numerical models that describe the coupled physical, chemical, mechanical, and biological processes interacting with each other over a broad range of spatial and temporal scales. This report reviews some of the reactive transport codes available in the literature for carbon dioxide (CO 2 ) applications and can assist the scientific community with the applicability of each code to solve a specific problem. Approaches implemented in these codes can be categorized in three groups: (i) continuum-scale, (ii) pore-scale, and (iii) hybrid-scale approaches. Theoretical foundations, numerical implementations, and application examples using the models are described. In the continuum approach, flow and transport are formulated in terms of a representative control volume of the medium and coupled with geochemical reactions. The medium is characterized by bulk parameters such as porosity, permeability, or reactive surface area. In the pore-scale approach, each point of space in the pore network is occupied by either a fluid or solid phase. The pore-scale approach requires an exact knowledge of the spatial and temporal phase distribution. In the hybrid-scale approach, media are described by multiple characteristic length-scales, with some regions using a pore-scale approach while others used a continuum approach.
2022 Society for Industrial and Applied Mathematics Annual Meeting, Pittsburgh, PA, July 11-15, 2022
2022 Society for Industrial and Applied Mathematics Annual Meeting, Pittsburgh, PA, July 11-15, 2022
APS March Meeting 2022, Virtual, March 13-18, 2022
APS March Meeting 2022, Virtual, March 13-18, 2022
In this paper, we investigate the pulsatile flow of a cement slurry in a pipe. The constitutive relation for the viscous stress tensor is based on the power-law model, where the shear viscosity not only depends on the shear rate but also the volume fraction of the cement particles. To solve for the volume fraction field, a convection-diffusion equation is used. The dimensionless form of the governing equations and the boundary conditions are solved numerically at different pulsatile cycles. Further, a parametric study is conducted to study the effect of different dimensionless numbers at different cycles on the velocity and the volume fraction profiles.
Thermal stresses may be induced in a hot dry rock when a cold fluid is injected in the well. To study this problem, we look at the thermoelastic response of a hot rock that is suddenly cooled. The cooling is assumed to be either at a constant temperature or at a constant heat flux per unit depth. Our approach is to nondimensionalize the equations and perform a parametric study and look at the temperature distribution and the induced-thermal stresses. The results indicate that depending on the extent of cooling and the cooling time, thermal stresses can be induced. Numerical simulations on sandstone, with an initial uniform temperature of 473 K, are also carried out. The results show that if the cooling is due to the surface temperature maintained at 463 K (10 °C lower than the initial temperature of the hot rock), thermal stresses that are larger than the rock tensile strength could be induced. When the cooling is due to a constant surface heat flux, this temperature can be reached after about 777 days of cooling with a minimum value of a heat flux of -20 W/m.
Vane methods combined with direct shear tests are widely applied to measure the yield stress $τ_0$ in concentrated suspensions such as cement slurries. This report reviews three different vanes with different shapes and sizes, and examines the relationship between the yield stress versus the torque and the shear rate versus the angular velocity. This research shows that vanes with conical shapes or reduced height/diameter ratio $(H/D)$ result in larger yield stress values.
Presented by NETL at 2019 Carbon Capture, Utilization, Storage, and Oil and Gas Technologies Integrated Review Meeting, 08/19
Bubbles suspended in a fluid cause the suspension to have different rheological properties than the base fluid. In general, the viscosity of the suspension increases as the volume fraction of the bubbles is increased. A current application, and motivation for this study, is in wellbore cements used for hydrocarbon extraction and carbon sequestration. In these settings, the gas bubbles are dispersed into the cement to reduce the density as well as improve the properties for specific conditions or wellbore issues. In this paper, we use Stokesian dynamics to numerically simulate the behavior of a large number of bubbles suspended in a Newtonian fluid. Going beyond prior work on simulating particles in suspension, we account for the nature of bubbles by allowing for slip on the bubble surface, the deflection on the bubble surface, and a bubble–bubble pairwise interaction that represents the surfactant physics; we do not account for bubble compressibility. We incorporate these interactions and simulate bubble suspensions of monodisperse size at several volume fractions. We find that the bubbles remain better dispersed compared with hard spherical particles that show a greater tendency to structure or cluster.
Presented by NETL at Engineering Mechanics Institute Conference 2019, 06/19