Search NASA⌕ Search

Engineering topics

Matheu, Roc

Publications and source records attributed to Matheu, Roc.

8 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Halide Perovskites Breathe Too: The Iodide–Iodine Equilibrium and Self-Doping in Cs 2 SnI 6

The response of an oxide crystal to the atmosphere can be personified as breathing-a dynamic equilibrium between O 2 gas and O 2– anions in the solid. We characterize the analogous defect reaction in an iodide double-perovskite semiconductor, Cs 2 SnI 6 . Here, I 2 gas is released from the crystal at room temperature, forming iodine vacancies. The iodine vacancy defect is a shallow electron donor and is therefore ionized at room temperature; thus, the loss of I2 is accompanied by spontaneous n-type self-doping. Conversely, at high I 2 pressures, I 2 gas is resorbed by the perovskite, consuming excess electrons as I 2 is converted to 2I – . Halide mobility and irreversible halide loss or exchange reactions have been studied extensively in halide perovskites. However, the reversible exchange equilibrium between iodide and iodine [2I – (s) ↔ I 2(g) + 2e – ] described here has often been overlooked in prior studies, though it is likely general to halide perovskites and operative near room temperature, even in the dark. An analysis of the 2I – (s) /I 2(g) equilibrium thermodynamics and related transport kinetics in single crystals of Cs 2 SnI 6 therefore provides insight toward achieving stable composition and electronic properties in the large family of iodide perovskite semiconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mosaic Cu I −Cu II −In III 2D Perovskites: Pressure‐Dependence of the Intervalence Charge Transfer and a Mechanochemical Alloying Method

Abstract The perovskite (BA) 4 [Cu II (Cu I In III ) 0.5 ]Cl 8 ( 1 BA ; BA + =butylammonium) allows us to study the high‐pressure structural, optical, and transport properties of a mixed‐valence 2D perovskite. Compressing 1 BA reduces the onset energy of Cu I/II intervalence charge transfer from 1.2 eV at ambient pressure to 0.2 eV at 21 GPa. The electronic conductivity of 1 BA increases by 4 orders of magnitude upon compression to 20 GPa, when the activation energy for conduction decreases to 0.16 eV. In contrast, Cu II perovskites achieve similar conductivity at ≈50 GPa. The solution‐state synthesis of these perovskites is complicated, with more undesirable side products likely from the precursor mixtures containing three different metal ions. To circumvent this problem, we demonstrate an efficient mechanochemical synthesis to expand this family of halide perovskites with complex composition by simply pulverizing together powders of 2D Cu II single perovskites and Cu I In III double perovskites.

Li, Jiayi↗
DOE OSTI2023

Mosaic Cu I –Cu II –In III 2D Perovskites: Pressure–Dependence of the Intervalence Charge Transfer and a Mechanochemical Alloying Method

The perovskite (BA) 4 [Cu II (Cu I In III ) 0.5 ]Cl 8 (1 BA ; BA + =butylammonium) allows us to study the high-pressure structural, optical, and transport properties of a mixed-valence 2D perovskite. Compressing 1 BA reduces the onset energy of Cu I/II intervalence charge transfer from 1.2 eV at ambient pressure to 0.2 eV at 21 GPa. The electronic conductivity of 1 BA increases by 4 orders of magnitude upon compression to 20 GPa, when the activation energy for conduction decreases to 0.16 eV. In contrast, Cu II perovskites achieve similar conductivity at ≈50 GPa. The solution-state synthesis of these perovskites is complicated, with more undesirable side products likely from the precursor mixtures containing three different metal ions. Finally, to circumvent this problem, we demonstrate an efficient mechanochemical synthesis to expand this family of halide perovskites with complex composition by simply pulverizing together powders of 2D Cu II single perovskites and Cu I In III double perovskites.

2D perovskite↗
DOE OSTI2022

Quasi-One-Dimensional Metallicity in Compressed CsSnI 3

Low-dimensional metal halides exhibit strong structural and electronic anisotropies, making them candidates for accessing unusual electronic properties. Here, in this work, we demonstrate pressure-induced quasi-one-dimensional (quasi-1D) metallicity in δ-CsSnI 3 . With the application of pressure up to 40 GPa, the initially insulating δ-CsSnI 3 transforms to a metallic state. Synchrotron X-ray diffraction and Raman spectroscopy indicate that the starting 1D chain structure of edge-sharing Sn–I octahedra in δ-CsSnI 3 is maintained in the high-pressure metallic phase while the SnI 6 octahedral chains are distorted. Our experiments combined with first-principles density functional theory calculations reveal that pressure induces Sn–Sn hybridization and enhances Sn–I coupling within the chain, leading to band gap closure and formation of conductive SnI 6 distorted octahedral chains. In contrast, the interchain I...I interactions remain minimal, resulting in a highly anisotropic electronic structure and quasi-1D metallicity. Our study offers a high-pressure approach for achieving diverse electronic platforms in the broad family of low-dimensional metal halides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Charge Reservoirs in an Expanded Halide Perovskite Analog: Enhancing High‐Pressure Conductivity through Redox‐Active Molecules

Abstract As halide perovskites and their derivatives are being developed for numerous optoelectronic applications, controlling their electronic doping remains a fundamental challenge. Herein, we describe a novel strategy of using redox‐active organic molecules as stoichiometric electron acceptors. The cavities in the new expanded perovskite analogs (dmpz)[Sn 2 X 6 ], (X=Br − ( 1Br ) and I − ( 1I )) are occupied by dmpz 2+ ( N , N ′‐dimethylpyrazinium), with the LUMOs lying ca. 1 eV above the valence band maximum (VBM). Compressing the metal‐halide framework drives up the VBM in 1I relative to the dmpz LUMO. The electronic conductivity increases by a factor of 10 5 with pressure, reaching 50(17) S cm −1 at 60 GPa, exceeding the high‐pressure conductivities of most halide perovskites. This conductivity enhancement is attributed to an increased hole density created by dmpz 2+ reduction. This work elevates the role of organic cations in 3D metal‐halides, from templating the structure to serving as charge reservoirs for tuning the carrier concentration.

Matheu, Roc↗
DOE OSTI2022

Charge Reservoirs in an Expanded Halide Perovskite Analog: Enhancing High–Pressure Conductivity through Redox–Active Molecules

As halide perovskites and their derivatives are being developed for numerous optoelectronic applications, controlling their electronic doping remains a fundamental challenge. Herein, we describe a novel strategy of using redox-active organic molecules as stoichiometric electron acceptors. The cavities in the new expanded perovskite analogs (dmpz)[Sn 2 X 6 ], (X=Br – (1Br) and I – (1I)) are occupied by dmpz 2+ (N,N'-dimethylpyrazinium), with the LUMOs lying ca. 1 eV above the valence band maximum (VBM). Compressing the metal-halide framework drives up the VBM in 1I relative to the dmpz LUMO. The electronic conductivity increases by a factor of 105 with pressure, reaching 50(17) S cm –1 at 60 GPa, exceeding the high-pressure conductivities of most halide perovskites. This conductivity enhancement is attributed to an increased hole density created by dmpz 2+ reduction. Lastly, this work elevates the role of organic cations in 3D metal-halides, from templating the structure to serving as charge reservoirs for tuning the carrier concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Second Coordination Sphere Effects in an Evolved Ru Complex Based on Highly Adaptable Ligand Results in Rapid Water Oxidation Catalysis

A new Ru complex containing the deprotonated 2,2':6',2"-terpyridine-6,6"-diphosphonic acid (H 4 tPa) and pyridine (py) of general formula [Ru II (H 3 tPa-κ-N 3 O)(py) 2 ] + , 2 + , has been prepared and thoroughly characterized by means of spectroscopic and electrochemical techniques, X-ray diffraction analysis, and density functional theory (DFT) calculations. Complex 2 + presents a dynamic behavior in the solution that involves the synchronous coordination and the decoordination of the dangling phosphonic groups of the tPa 4– ligand. Yet, at oxidation state IV, complex 2 + becomes seven coordinated with the two phosphonic groups now bonded to the metal center. Further, at this oxidation state at neutral and basic pH, the Ru complex undergoes the coordination of an exogenous OH – group from the solvent that leads to an intramolecular aromatic O atom insertion into the CH bond of one of the pyridyl groups, forming the corresponding phenoxo-phosphonate Ru complex [Ru III (tPaO-κ-N 2 O P O C )(py) 2 ] 2– , 4 2– , where tPaO 5– is the 3-(hydroxo-[2,2':6',2"-terpyridine]-6,6"-diyl)bis(phosphonate) ligand. This new in situ generated Ru complex, 4 2– , has been isolated and spectroscopically and electrochemically characterized. In addition, a crystal structure has been also obtained using single-crystal X-ray diffraction techniques. Complex 4 2– turns out to be an exceptional water oxidation catalyst achieving record maximum turnover frequencies (TOF max ) on the order of 16 000 s –1 . A mechanistic analysis complemented with DFT calculations has further been carried out, showing the critical role of intramolecular second coordination sphere effects exerted by the phosphonate groups in lowering the activation energy at the rate-determining step.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗