Search NASA⌕ Search

Engineering topics

Matthew Mullin

Publications and source records attributed to Matthew Mullin.

9 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

Development of LISA Laser System at NASA

NASA Goddard Space Flight Center (GSFC) is developing a master oscillator power amplifier (MOPA) laser transmitter for the Laser Interferometer Space Antenna (LISA) mission. The laser transmitter is one of the potential contributions to the LISA mission from NASA. Our development effort has included a master oscillator (MO), a power amplifier (PA), a frequency reference system (FRS), a power monitor detector (PMON), and laser electronics module (LEM). We are working on their design, performance evaluation, environmental testing, and reliability testing for space flight. We have built TRL 4 laser optical modules based on the MO and PA, which meets most performance requirements. One of the TRL 4 laser optical modules has been delivered to ESA for independent evaluation. TRL 6 versions of MO and PA are being built and evaluated at GSFC. TRL 5 and 6 versions of laser electronics are under development. In this paper, we will describe our progress to date and plans to demonstrate and deliver a TRL 6 laser demonstrator system to ESA by 2024.

LISA, Space Lasers↗
NASA NTRS2021

Orbiting and In-Situ Lidars for Earth and Planetary Applications

At NASA Goddard Space Flight Center (GSFC), we have been developing spaceborne lidar instruments for space sciences. We have successfully flown several missions in the past based on mature diode pumped solid-state laser transmitters. In recent years we have been developing advanced laser technologies for applications such as laser spectroscopy, laser communications, and interferometry. In this paper, we will discuss recent experimental progress on these systems and instrument prototypes for ongoing development efforts.

Anthony W. Yu↗
NASA NTRS2020

Orbiting and In-Situ Lidars for Earth and Planetary Applications

At NASA Goddard Space Flight Center (GSFC), we have been developing spaceborne lidar instruments for Earth and planetary sciences. We have successfully flown a several missions in the past based on mature diode pumped solid-state laser transmitters. In recent years we have been developing advanced laser technologies for applications such as laser spectroscopy, laser communications, and interferometry. In this paper, we will discuss recent experimental progress on these systems and instrument prototypes for ongoing development efforts.

Space instruments↗
NASA NTRSDate not supplied

Solid-State Laser Development for the in Situ Spectroscopic Europa Explorer Instrument

The in Situ Spectroscopic Europa Explorer (iSEE) instrument is an ultra-compact laser-enabled Raman spectrometer instrument that meets the top-level science requirements for multiple future planetary in situ missions to explore the surface and atmospheric chemistry of planetary bodies across the Solar System. Enceladus, Europa, the Moon, Mars, and Venus are some of the primary targets for future NASA missions to search for extraterrestrial life and potentially habitable environments beyond Earth, further our understanding of the timing and formation of the Solar System, and identify potentially viable economic resources such as water and/or valuable metal assets. We report on the advancement and space flight qualification of a compact, robust, solid-state laser operating at 515 nm that serves as the excitation source for the iSEE investigation.

Solid state laser, Raman spectrometer, visible las↗
NASA NTRSDate not supplied

Characterization and Testing of Copper-Nickel Electroplated 3D Printed Parts for Space Flight Applications

3D printing enables novel designs which are impossible to replicate with conventional machining. The process involves 3D printing components from a polymer using a standard resin-based printing process, then electroplating the parts with a thin layer of copper-nickel. Initial results have shown these electroplated components have increased structural strength, while being less expensive; less massive; and can be made faster compared to conventional CNC machining. The focus and metric of success was to qualify this process and to answer the question if the 3D printed electroplated parts can be fabricated in a more cost, mass and schedule efficient manor compared to traditional CNC machining. Also, to determine if using this method will cause parts to have contamination issues or if parts can survive space environment testing. This was accomplished by conducting several critical tests such as outgassing, material testing and thermal cycling. In addition, this method is being used to develop a practical structural application for KArLE (Potassium Argon Laser Experiment).

3-D Printing↗
NASA NTRSDate not supplied

Performance of the Dragonfly Mass Spectrometer (DraMS) Programmable UV Laser Source Engineering Test Unit (ETU)

NASA’s Dragonfly mission will sample surface materials from multiple sites on Saturn’s largest moon, Titan, in exploration of its potential for prebiotic chemistry. We report on the performance of our short-pulsed UV laser transmitter, developed for the Dragonfly’s on-board Mass Spectrometer (DraMS). Our engineering test unit (ETU) has completed flight qualification and demonstrated its operational science requirements, such that the final flight unit build can begin. The Titan Hydrocarbon Analysis Nanosecond Optical Source (THANOS) ETU laser produces 266 nm laser pulses at programmable energy levels in order to create high resolution laser desorption mass spectrometry (LDMS) measurements. The laser operates in short bursts of 1-50 pulses, each at < 2 ns pulse width, at a 100 Hz repetition rate. Creating a sealed Titanium unit, capable of operation on the extreme environment of Titan’s surface was a major engineering challenge. The laser successfully demonstrated its ability to meet all operational requirements in terms of pulse energy, beam pointing on target and repeatability even after extensive environmental testing.

Matthew Mullin↗