Design and experimental results for a high-altitude, long-endurance airfoil
Explore the source record for details and available documents.
Maughmer, Mark D.↗
Engineering topics
Maughmer, Mark D.
Publications and source records attributed to Maughmer, Mark D..
Prediction of forces and moments for flight vehicle control effectors: Workplan
Two research activities directed at hypersonic vehicle configurations are currently underway. The first involves the validation of a number of classical local surface inclination methods commonly employed in preliminary design studies of hypersonic flight vehicles. Unlike studies aimed at validating such methods for predicting overall vehicle aerodynamics, this effort emphasizes validating the prediction of forces and moments for flight control studies. Specifically, several vehicle configurations for which experimental or flight-test data are available are being examined. By comparing the theoretical predictions with these data, the strengths and weaknesses of the local surface inclination methods can be ascertained and possible improvements suggested. The second research effort, of significance to control during take-off and landing of most proposed hypersonic vehicle configurations, is aimed at determining the change due to ground effect in control effectiveness of highly swept delta planforms. Central to this research is the development of a vortex-lattice computer program which incorporates an unforced trailing vortex sheet and an image ground plane. With this program, the change in pitching moment of the basic vehicle due to ground proximity, and whether or not there is sufficient control power available to trim, can be determined. In addition to the current work, two different research directions are suggested for future study. The first is aimed at developing an interactive computer program to assist the flight controls engineer in determining the forces and moments generated by different types of control effectors that might be used on hypersonic vehicles. The first phase of this work would deal in the subsonic portion of the flight envelope, while later efforts would explore the supersonic/hypersonic flight regimes. The second proposed research direction would explore methods for determining the aerodynamic trim drag of a generic hypersonic flight vehicle and ways in which it can be minimized through vehicle design and trajectory optimization.
Maughmer, Mark D.↗
A computationally efficient modelling of laminar separation bubbles
In order to predict the aerodynamic characteristics of airfoils operating at low Reynolds numbers, it is necessary to accurately account for the effects of laminar (transitional) separation bubbles. Generally, the greatest difficulty comes about when attempting to determine the increase in profile drag that results from the presence of separation bubbles. While a number of empirically based separation bubble models have been introduced in the past, the majority assume that the bubble development is fully predictable from upstream conditions. One way of accounting for laminar separation bubbles in airfoil design is the bubble analog used in the design and analysis program of Eppler and Somers. A locally interactive separation bubble model was developed and incorporated into the Eppler and Somers program. Although unable to account for strong interactions such as the large reduction in suction peak sometimes caused by leading edge bubbles, it is able to predict the increase in drag and the local alteration of the airfoil pressure distribution that is caused by bubbles occurring in the operational range which is of most interest.
Dini, Paolo↗
A computationally efficient modelling of laminar separation bubbles
In order to predict the aerodynamic characteristics of airfoils operating at low Reynolds numbers, it is necessary to accurately account for the effects of laminar (transitional) separation bubbles. Generally, the greatest difficulty comes about when attempting to determine the increase in profile drag that results from the presence of separation bubbles. While a number of empirically based separation bubble models have been introduced in the past, the majority assume that the bubble development is fully predictable from upstream conditions. One way of accounting for laminar separation bubbles in airfoil design is the bubble analog used in the design and analysis program of Eppler and Somers. A locally interactive separation bubble model was developed and incorporated into the Eppler and Somers program. Although unable to account for strong interactions such as the large reduction in suction peak sometimes caused by leading edge bubbles, it is able to predict the increase in drag and the local alteration of the airfoil pressure distribution that is caused by bubbles occurring in the operational range which is of most interest.
Dini, Paolo↗
Figures of merit for airfoil/aircraft design integration
Because the airfoil can so strongly impact other aspects of an aircraft configuration, it is important that the airfoil design process be integrated with that of the aircraft to achieve the best possible performance of a new flight vehicle. To aid in preliminary design efforts, several aerodynamic figures of merit are presented which facilitate the matching of the airfoil performance characteristics to those of the aircraft. These figures of merit are fairly general and can assist the airfoil design process for flight vehicles designed for maximum endurance, range, or ceiling. Although specifically applicable to vehicles for which the wing area is sized by some required minimum airspeed, the discussion is pertinent to all airfoil/aircraft matching situations and points the way for developing similar figures of merit to aid the airfoil/aircraft design process for any flight vehicle.
Maughmer, Mark D.↗
A computationally efficient modelling of laminar separation bubbles
The goal of this research is to accurately predict the characteristics of the laminar separation bubble and its effects on airfoil performance. To this end, a model of the bubble is under development and will be incorporated in the analysis section of the Eppler and Somers program. As a first step in this direction, an existing bubble model was inserted into the program. It was decided to address the problem of the short bubble before attempting the prediction of the long bubble. In the second place, an integral boundary-layer method is believed more desirable than a finite difference approach. While these two methods achieve similar prediction accuracy, finite-difference methods tend to involve significantly longer computer run times than the integral methods. Finally, as the boundary-layer analysis in the Eppler and Somers program employs the momentum and kinetic energy integral equations, a short-bubble model compatible with these equations is most preferable.
Maughmer, Mark D.↗
The design of an airfoil for a high-altitude, long-endurance remotely piloted vehicle
Airfoil design efforts are studied. The importance of integrating airfoil and aircraft designs was demonstrated. Realistic airfoil data was provided to aid future high altitude, long endurance aircraft preliminary design. Test cases were developed for further validation of the Eppler program. Boundary layer, not pressure distribution or shape, was designed. Substantial improvement was achieved in vehicle performance through mission specific airfoil designed utilizing the multipoint capability of the Eppler program.
Maughmer, Mark D.↗
An airfoil designed for a high-altitude, long endurance remotely piloted vehicle
The preliminary design of high-altitude, long-endurance RPVs is complicated by the paucity of data concerning airfoils with high lift coefficients at low Re numbers. Attention is presently given to a generic airfoil of this type for the design Re number range of 700,000 to 2 million. Low drag is predicted for lift coefficients from 0.4 (for high speed dashes) to 1.5 (for maximum mission endurance). The airfoil is such that its maximum lift coefficient, at 1.8, is unaffected by the surface contamination that would be encountered during takeoffs and landings in rain or over insect-infested runways.
Maughmer, Mark D.↗