Search NASA⌕ Search

Engineering topics

May, Steven J.

Publications and source records attributed to May, Steven J..

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Synthesis of Three Isoelemental MXenes and Their Structure–Property Relationships

The MXene family has rapidly expanded since its discovery in 2011 to include nearly 50 unique MXenes, not accounting for solid solutions and diverse surface terminations. However, a question raised since their discovery has been: What is the effect of n? In other words, how does the number of layers affect the MXene properties? To date, no direct study of the impact of n has been conducted due to the lack of isoelemental MXene compositions spanning more than two n values. Herein, we report on a system of three MXenes with identical M-site chemistries, (Mo 2/3 V 1/3 ) n+1 C n T x (n = 1, 2, and 3), allowing for the study of MXene structure–property relationships across n, for the first time. Chemical analysis of the samples shows complete and partial ordering of the M-elements in the n = 2 and 3 samples, respectively. We show that sample stability gradually evolves as n is increased from 1 to 3, while electronic and electrochemical properties exhibit more significant changes in going from n = 1 to 2 than from n = 2 to 3.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Correlating electronic properties with M-site composition in solid solution Ti y Nb 2- y CT x MXenes

High electrical conductivity is desired in MXene films for applications such as electromagnetic interference shielding, antennas, and electrodes for electrochemical energy storage and conversion applications. Due to the acid etching-based synthesis method, it is challenging to deconvolute the relative importance that factors such as chemical composition and flake size contribute to resistivity. To understand the intrinsic and extrinsic contributions to the macroscopic electronic transport properties, a systematic study controlling compositional and structural parameters was conducted with eight solid solutions in the Ti y Nb 2-y CT x system. Here, in particular, we investigated the different roles played by metal (M)-site composition, flake size, and d-spacing on macroscopic transport. Hard x-ray photoemission spectroscopy and spectroscopic ellipsometry revealed changes to electronic structure induced by the M-site alloying. Consistent with the spectroscopic results, the low- and room-temperature conductivities and effective carrier mobility are correlated with the Ti content, while the impact of flake size and d-spacing is most prominent in low-temperature transport. The results provide guidance for designing and engineering MXenes with a wide range of conductivities.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Efficient microwave absorption with V n+1 C n T x MXenes

The availability of MXenes and other two-dimensional conductive nanomaterials with tunable surface chemistry has reshaped the field of electromagnetic protection. However, the high electrical conductivity and low dielectric loss of titanium-based MXenes lead to strong reflection of electromagnetic waves, even when combined with polymers to form composites. Here, we report on the ability of vanadium-based MXenes to provide broadband microwave absorption. Polyurethane composites with ~2 wt % V n+1 C n T x can absorb 90% of electromagnetic waves covering the entire X band. In addition, pure V n+1 C n T x films of submicrometer thickness can provide effective electromagnetic interference shielding. The free electron transport, surface terminations, native defects, and layers arrangement in composites have profound effects on electronic and dielectric properties of V n+1 C n T x MXenes. This study points toward a new frontier for development of thin and highly absorbing MXene-based electromagnetic protection materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Strain-Induced Anion-Site Occupancy in Perovskite Oxyfluoride Films

Anion ordering is a promising route to engineer physical properties in functional heteroanionic materials. A central challenge in the study of anion-ordered compounds lies in developing robust synthetic strategies to control anion occupation and in understanding the resultant implications for electronic structure. Here, we show that epitaxial strain induces preferential occupation of F and O on the anion sites in perovskite oxyfluorides SrMn O2.5-δ F γ films grown on different substrates. Under compressive strain, F tends to occupy the apical-like sites, which was revealed by F and O K-edge linearly polarized x-ray absorption spectroscopy and density functional theory calculations, resulting in an enhanced c-axis expansion. Under tensile strain, F tends to occupy the equatorial-like sites, enabling the longer Mn-F bonds to lie within the plane. The oxyfluoride films exhibit a significant orbital polarization of the 3d electrons, distinct F-site dependence to their valence band density of states, and an enhanced resistivity when F occupies the apical-like anion site compared to the equatorial-like site. By demonstrating a general strategy for inducing preferential anion-site occupancy in oxyfluoride perovskites, this work lays the foundation for future materials design and synthesis efforts that leverage this greater degree of atomic control to realize new polar or quasi-two-dimensional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Evidence of a magnetic transition in atomically thin Cr 2 TiC 2 T x MXene

Two-dimensional (2D) transition metal carbides and nitrides known as MXenes have shown attractive functionalities such as high electronic conductivity, a wide range of optical properties, versatile transition metal and surface chemistry, and solution processability. Although extensively studied computationally, the magnetic properties of this large family of 2D materials await experimental exploration. 2D magnetic materials have recently attracted significant interest as model systems to understand low-dimensional magnetism and for potential spintronic applications. Here, we report on synthesis of Cr 2 TiC 2 T x MXene and a detailed study of its magnetic as well as electronic properties. Using a combination of magnetometry, synchrotron X-ray linear dichroism, and field- and angular-dependent magnetoresistance measurements, we find clear evidence of a magnetic transition in Cr 2 TiC 2 T x at approximately 30 K, which is not present in its bulk layered carbide counterpart (Cr 2 TiAlC 2 MAX phase). Overall, this work presents the first experimental evidence of a magnetic transition in a MXene material and provides an exciting opportunity to explore magnetism in this large family of 2D materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Evidence for Interfacial Octahedral Coupling as a Route to Enhance Magnetoresistance in Perovskite Oxide Superlattices

Engineering octahedral rotations in oxide heterostructures is a promising route for controlling magnetic properties in perovskites, with recent work focusing on magnetic-ordering temperatures and magnetic anisotropies. Here the effects of interfacial octahedral coupling on magnetoresistance are demonstrated in a series of (La 0.7 Sr 0.3 MnO 3 ) n /(LaFeO 3 ) 10 superlattices grown on (001)- and (111)-oriented SrTiO 3 substrates. The different crystallographic orientations allow for the interfacial octahedral connectivity to be tuned, with weaker interfacial coupling present at the (001)-oriented than the (111)-oriented structures as revealed by density functional theory calculations. In n = 14 superlattices, the effect of orientation on the physical properties is minimal with both (001)- and (111)-oriented samples exhibiting similar magnetoresistance. As the fraction of interfacial volume within the LSMO layers is increased by decreasing n, the magnetoresistive behavior of the samples diverges with significantly larger magnetoresistance magnitudes present in the (111)-oriented superlattices. Furthermore, the results are consistent with octahedral coupling playing a greater role in the functional properties at (111)-heterointerfaces and demonstrate a structure-driven approach to tuning interfacial magnetoresistance in complex-oxide heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Distinguishing electronic contributions of surface and sub-surface transition metal atoms in Ti-based MXenes

MXenes are a rapidly-expanding family of 2D transition metal carbides and nitrides that have attracted attention due to their excellent performance in applications ranging from energy storage to electromagnetic interference shielding. Numerous other electronic and magnetic properties have been computationally predicted, but not yet realized due to the experimental difficulty in obtaining uniform surface terminations (T x ), necessitating new design approaches for MXenes that are independent of surface groups. In this study, we distinguished the contributions of surface and sub-surface Ti atoms to the electronic structure of four Ti-based MXenes (Ti 2 CT x , Ti 3 C 2 T x , Cr 2 TiC 2 T x , and Mo 2 TiC 2 T x ) using soft x-ray absorption spectroscopy, revealing minimal changes in the spectral features between the parent MAX phase and its MXene when no surface Ti atoms are present in the MXene, such as Mo 2 TiC 2 T x and Cr 2 TiC 2 T x . In contrast, for MXenes with surface Ti atoms, here Ti 3 C 2 T x and Ti 2 CT x , the Ti L-edge spectra are significantly modified compared to their parent MAX phase compounds. First principles calculations provide similar trends in the partial density of states derived from surface and interior Ti atoms, corroborating the spectroscopic measurements. Furthermore, these results reveal that electronic states derived from sub-surface M-site layers are largely unperturbed by the surface groups, indicating a relatively short length scale over which the T x groups alter the nominal electron count associated with Ti atoms and suggesting that desired band features should be hosted by sub-surface M-sites that are electronically more robust than their surface M-site counterparts.

36 MATERIALS SCIENCE↗