Engineering topics
Publications and source records attributed to May, W. G..
A new and simple type of millimeter-wave isolator using a solid-state magnetoplasma in a reflection-beam system is described. Some data are presented showing performance at 94 GHz. Practical considerations indicate that performance should be much closer to ideal at higher frequencies.
The device considered in this study is a semiconductor waveguide isolator consisting of a hollow column of a semiconductor mounted coaxially in a circular waveguide in a longitudinal dc magnetic field. An elementary and physical analysis based on the excitation of plane waves in the guide and a more rigorous mode-matching analysis (MMA) are presented. These theoretical predictions are compared with experimental results for an InSb isolator at 94 GHz and 75 K.
Magnetoplasma reflection beam isolators for submillimeter wave use are discussed. The basic configuration used is that of the Kerr transverse magneto-optical effect. Theoretical and experimental data at 337 microns using InSb as a plasma are given.
A semiconductor waveguide isolator consisting of a hollow column of a semiconductor mounted coaxially is considered in a circular waveguide in a longitudinal dc magnetic field. An elementary and physical analysis based on the excitation of plane waves in the guide and a more rigorous mode matching analysis are presented. These theoretical predictions are compared with experimental results for an InSb isolator at 94GHz and 75 K.
Magnetoplasma reflection-beam isolators for submillimeter-wave use are discussed in theory and experiment. The basic device uses the Kerr transverse magnetooptic effect (plane of polarization of the EM wave in the plane of incidence, which is perpendicular to a dc magnetic field) in InSb near room temperature. When the semiconductor slab is covered with a thin dielectric layer acting as a matching transformer, improved performance is predicted and observed at 337 microns, and very efficient isolator performance is predicted for 118 microns. Physical arguments are presented to explain the nonreciprocal phenomenon and lead to better device design.
Millimeter wave semiconductor isolator using circular waveguide with coaxial n-type InSb in longitudinal magnetic field
This paper reviews the use of anisotropic effects in a passive semiconductor magnetoplasma for the development of submillimeter isolators and circulators. The emphasis is on two schemes that are applicable over the far infrared portion of the spectrum. The theory of transmission devices depending on Faraday rotation is described, and experiments are discussed. At far infrared wavelengths it is not necessary to cool the semiconductor in order to achieve low forward loss. Some experimental results are available in this frequency range, and a theoretical evaluation of device performance is given. Reflection devices in which the desired signal does not propagate through the semiconductor, but is reflected off of its surface, are also discussed. Experimental results show that these devices can have a low forward loss; a variety of novel geometrical arrangements are able to improve isolator performance. Theoretical results indicating satisfactory performance for a far infrared isolator using InSb at room temperature are presented.
Semiconductor application to quasi-optical isolators - nonreciprocal reflection beam isolator and far infrared isolators using Faraday rotation
Utilization of anisotropic effects in semiconductor plasmas for development of millimeter wavelength isolators