Search NASA⌕ Search

Engineering topics

McBride, Emma E.

Publications and source records attributed to McBride, Emma E..

13 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

X-ray diffraction of metastable structures from supercooled liquid hydrogen

We report time resolved observations of the crystallization from liquid hydrogen, supercooled to temperatures below the melting point, using 11.2 keV X-ray diffraction from the Linac Coherent Light Source (LCLS). Changes to the metastable solid and liquid structure factors have been dynamically measured. This allows for a direct determination of the lowest energy crystal polymorphs, the stacking probabilities, as well as the liquid and solid densities and temperatures. Such measurements provide experimental evidence of an Arrhenius-like growth kinetics along the stacking direction during supercooling.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Release dynamics of nanodiamonds created by laser-driven shock-compression of polyethylene terephthalate

Laser-driven dynamic compression experiments of plastic materials have found surprisingly fast formation of nanodiamonds (ND) via X-ray probing. This mechanism is relevant for planetary models, but could also open efficient synthesis routes for tailored NDs. We investigate the release mechanics of compressed NDs by molecular dynamics simulation of the isotropic expansion of finite size diamond from different P-T states. Analysing the structural integrity along different release paths via molecular dynamic simulations, we found substantial disintegration rates upon shock release, increasing with the on-Hugnoiot shock temperature. We also find that recrystallization can occur after the expansion and hence during the release, depending on subsequent cooling mechanisms. Our study suggests higher ND recovery rates from off-Hugoniot states, e.g., via double-shocks, due to faster cooling. Laser-driven shock compression experiments of polyethylene terephthalate (PET) samples with in situ X-ray probing at the simulated conditions found diamond signal that persists up to 11 ns after breakout. In the diffraction pattern, we observed peak shifts, which we attribute to thermal expansion of the NDs and thus a total release of pressure, which indicates the stability of the released NDs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Evidence for phonon hardening in laser-excited gold using x-ray diffraction at a hard x-ray free electron laser

Studies of laser-heated materials on femtosecond timescales have shown that the interatomic potential can be perturbed at sufficiently high laser intensities. For gold, it has been postulated to undergo a strong stiffening leading to an increase of the phonon energies, known as phonon hardening. Despite efforts to investigate this behavior, only measurements at low absorbed energy density have been performed, for which the interpretation of the experimental data remains ambiguous. By using in situ single-shot x-ray diffraction at a hard x-ray free-electron laser, the evolution of diffraction line intensities of laser-excited Au to a higher energy density provides evidence for phonon hardening.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Probing shock dynamics inside micro-wire targets after high-intensity laser irradiation using small angle x-ray scattering of a free-electron laser

In this paper, we present an experiment that explores the plasma dynamics of a 7μm diameter carbon wire after being irradiated with a near-relativistic-intensity short pulse laser. Using an x-ray free electron laser pulse to measure the small angle x-ray scattering signal, we observe that the scattering surface is bent and prone to instability over tens of picoseconds. The dynamics of this process are consistent with the presence of a sharp, propagating shock front inside the wire, moving at a speed close to the hole boring velocity or that expected from a thermal shock at a few tens of Mbar.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

The equations of state of statically compressed palladium and rhodium

Here, the pressure–volume equations of state of palladium and rhodium statically compressed in neon are presented. Vinet fits give parameters for palladium: V0=58.678(73) Å 3 , B 0 =189.3(30) GPa, B' 0 =5.473(63), and rhodium: V 0 =55.062(63) Å3, B 0 =241.3(65) GPa, B' 0 =5.34(24). Both metals are observed to react with hydrocarbons under pressure to form hydrides. Existing equations of state are discussed with regard to potential inadvertent hydrogen contamination as a source for discrepancies and anomalous fitted parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Pressure Driven Alkane Dehydrogenation by Palladium Metal

Abstract Dehydrogenation of alkanes is of increasing importance in fulfilling global demand for olefins and offers a potential source of carbon‐neutral hydrogen as a co‐product. Currently commercial dehydrogenation processes occur at high‐temperatures (500–900 °C) which is energy intensive and results in side reactions and rapid coking of the catalysts. In addition, the hydrogen produced is often burned to maintain temperature and to inhibit the back reaction. Here, pressure is utilized as a parameter to enable novel chemical catalytic processes, and ambient‐temperature dehydrogenation of alkanes by palladium is observed at 50–100 MPa, with both hydrogen gas and olefins recovered on decompression. This reaction follows a fundamentally different path to current commercial high‐temperature low‐pressure dehydrogenation processes with the palladium catalyst reversibly forming a hydride intermediate.

08 HYDROGEN↗
DOE OSTI2022

Diamond formation kinetics in shock-compressed C$-$H$-$O samples recorded by small-angle x-ray scattering and x-ray diffraction

Extreme conditions inside ice giants such as Uranus and Neptune can result in peculiar chemistry and structural transitions, e.g., the precipitation of diamonds or superionic water, as so far experimentally observed only for pure C$-$H and H 2 O systems, respectively. Here, we investigate a stoichiometric mixture of C and H 2 O by shock-compressing polyethylene terephthalate (PET) plastics and performing in situ x-ray probing. We observe diamond formation at pressures between 72 ± 7 and 125 ± 13 GPa at temperatures ranging from ~3500 to ~6000 K. Combining x-ray diffraction and small-angle x-ray scattering, we access the kinetics of this exotic reaction. The observed demixing of C and H 2 O suggests that diamond precipitation inside the ice giants is enhanced by oxygen, which can lead to isolated water and thus the formation of superionic structures relevant to the planets’ magnetic fields. Moreover, our measurements indicate a way of producing nanodiamonds by simple laser-driven shock compression of cheap PET plastics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The high-pressure lithium–palladium and lithium–palladium–hydrogen systems

Abstract The lithium–palladium and lithium–palladium–hydrogen systems are investigated at high pressures at and above room temperature. Two novel lithium–palladium compounds are found below $${18.7}\,{\mathrm{GPa}}$$ 18.7 GPa . An ambient temperature phase is tentatively assigned as $$F{\bar{4}}3m\,\hbox {Li}_{17}\hbox {Pd}_{4}$$ F 4 ¯ 3 m Li 17 Pd 4 , with $$a = 17.661(1)$$ a = 17.661 ( 1 ) Å at 8.64 GPa, isostructural with $$\hbox {Li}_{17}\hbox {Sn}_{4}$$ Li 17 Sn 4 . The other phase occurs at high-temperature and is $$I{\bar{4}}3m\, \hbox {Li}_{11}\hbox {Pd}_{2}$$ I 4 ¯ 3 m Li 11 Pd 2 , $$a = 9.218(1)$$ a = 9.218 ( 1 ) Å at 3.88 GPa and 200 $$^\circ {\mathrm{C}}$$ ∘ C , similar to $$\hbox {Li}_{11}\hbox {Pt}_{2}$$ Li 11 Pt 2 , which is also known at high pressure. The presence of hydrogen in the system results in an $$I{\bar{4}}3m$$ I 4 ¯ 3 m structure with $$a = 8.856(1)$$ a = 8.856 ( 1 ) Å at 9.74 GPa. This persists up to $${13.3}\,\mathrm{GPa}$$ 13.3 GPa , the highest pressure studied. Below $${2}\,{\mathrm{GPa}}$$ 2 GPa an fcc phase with a large unit cell, $$a = 19.324(1)$$ a = 19.324 ( 1 ) Å at 0.39 GPa, is also observed in the presence of hydrogen. On heating the hydrogen containing system at 4 GPa the $$I{\bar{4}}3m$$ I 4 ¯ 3 m phases persists to the melting point of lithium. In both systems melting the lithium results in the loss of crystalline diffraction from palladium containing phases. This is attributed to dissolution of the palladium in the molten lithium, and on cooling the palladium remains dispersed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Compression-rate dependence of pressure-induced phase transitions in Bi

Abstract It is qualitatively well known that kinetics related to nucleation and growth can shift apparent phase boundaries from their equilibrium value. In this work, we have measured this effect in Bi using time-resolved X-ray diffraction with unprecedented 0.25 ms time resolution, accurately determining phase transition pressures at compression rates spanning five orders of magnitude (10 –2 –10 3 GPa/s) using the dynamic diamond anvil cell. An over-pressurization of the Bi-III/Bi-V phase boundary is observed at fast compression rates for different sample types and stress states, and the largest over-pressurization that is observed is ΔP = 2.5 GPa. The work presented here paves the way for future studies of transition kinetics at previously inaccessible compression rates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

X-ray Free Electron Laser-Induced Synthesis of ε -Iron Nitride at High Pressures

The ultrafast synthesis of ε-Fe 3 N 1+x in a diamond-anvil cell (DAC) from Fe and N 2 under pressure was observed using serial exposures of an X-ray free electron laser (XFEL). When the sample at 5 GPa was irradiated by a pulse train separated by 443 ns, the estimated sample temperature at the delay time was above 1400 K, confirmed by in situ transformation of α- to γ-iron. Ultimately, the Fe and N 2 reacted uniformly throughout the beam path to form Fe 3 N 1.33 , as deduced from its established equation of state (EOS). We thus demonstrate that the activation energy provided by intense X-ray exposures in an XFEL can be coupled with the source time structure to enable exploration of the time-dependence of reactions under high-pressure conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

An approach for the measurement of the bulk temperature of single crystal diamond using an X-ray Free Electron Laser

We present a method to determine the bulk temperature of a single crystal diamond sample at an X-Ray Free Electron Laser using inelastic X-ray scattering. The experiment was performed at the High Energy Density (HED) instrument at the European XFEL GmbH, Germany. The technique, based on inelastic X-ray scattering and the principle of detailed balance, was demonstrated to give accurate temperature measurements, within 8% for both room temperature diamond and heated diamond to 500 K. Here, the temperature was increased in a controlled way using a resistive heater to test theoretical predictions of the scaling of the signal with temperature. The method was tested by validating the energy of the phonon modes with previous measurements made at room temperature using inelastic X-ray scattering and neutron scattering techniques. This technique could be used to determine the bulk temperature in transient systems with a temporal resolution of 50 fs and for which accurate measurements of thermodynamic properties are vital to build accurate equation of state models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗