Search NASA⌕ Search

Engineering topics

McCall, Scott K.

Publications and source records attributed to McCall, Scott K..

29 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Enhanced magnetostriction through dilute Ce doping of Fe-Ga

Doping of magnetostrictive galfenol (Fe 82 Ga 18 , in at.%) with rare-earth elements significantly enhances magnetostriction, with the largest gains achieved in textured melt-spun ribbons. Here, it is demonstrated that even extremely dilute Ce, as little as 65 ppm, can double the magnetostrictive response of galfenol when coupled with an appropriate heat treatment. This improvement is correlated with a compression of the host lattice, both of which reach their maximum extent at the calculated solubility limit of Ce in in body-centered cubic (bcc) galfenol, ~ 50 ppm. Beyond this point, excess Ce segregates into CeGa 2 , which forms an interdendritic network throughout the sample at high Ce levels and cannot be resolutionized through heat treatments. These findings point to the importance of solubility limits (i.e., equilibrium thermodynamics) in determining appropriate doping levels or heat treatment couples to optimize magnetostrictive performance, confirming that overdoping is actively detrimental to both material properties and cost.

36 MATERIALS SCIENCE↗
DOE OSTI2022

How Cerium and Lanthanum as Coproducts Promote Stable Rare Earth Production and New Alloys

The largest outputs of rare earth mining are the low-value byproducts cerium and lanthanum, which burden rare earth supply chains because they must be separated from more desirable rare earths used in magnet production. Promoting demand for cerium and lanthanum can potentially diversify the economics of rare earth mining and improve supply chain stability for all rare earth elements. A promising avenue for increasing byproduct rare earth element demand is their use in aluminum alloys; an application for cerium and lanthanum offering multiple benefits to manufacturing such as energy reduction and improved throughput. Experimental materials science and economic implications of Al-rare earth element alloys will be discussed. We show that Al–La/Ce alloys have elevated mechanical strength compared to more traditional aluminum alloys, in some formulations can be used without heat treatment, and possess a highly castable eutectic microstructure. This report presents the use of cerium and lanthanum in aluminum alloys as an example of how supply chain focused approaches to technological development can benefit stakeholders at every step in production.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Recycling rare earths: Perspectives and recent advances

Abstract Rare-earth element (REE) demand is expected to increase by a factor of up to 7 by 2040. Recycling avoids the significant hurdles associated with opening new mines, but collection and disassembly of REE-containing devices are barriers. Absolute and relative abundances of REEs and co-occurring constituents differ significantly in secondary compared to primary sources, presenting challenges and opportunities. REE concentrations are typically low, but manufactured devices include only the desired REE, avoiding the “REE balance problem” that besets natural ores. Fewer REEs need to be separated, as compared to separation of the entire lanthanide series. Co-recovery of precious (e.g., Au, Ag, Pt) or base metals (e.g., Cu, Sn, Zn) from e-wastes can offset recycling costs. Some examples of recently developed approaches for REE extraction and separation are presented here, with an emphasis on methods offering environmental benefits such as lower toxic chemical usage and reduced energy costs. Graphical abstract

36 MATERIALS SCIENCE↗
DOE OSTI2021

Advances in Processing, Manufacturing, and Applications of Magnetic Materials

Magnetic materials are increasingly important for many green energy technologies. Probably, the best known of these are permanent magnets. They are used to supply a magnetic field and are widely used in actuators, motors, generators, data storage, and sensors. These are “hard magnets,” meaning that they retain a large permanent magnetization (difficult to be demagnetized), which is what makes them so useful in motors where an opposing magnetic field can be used to push against them. A coercivity (resistance to demagnetization) of ~400 Oe (32,000 A/m) or more is typically the threshold value for a hard magnet and is typical of isotropic sintered ferrite (SrFe 12 O 19 ) such as found in many “refrigerator magnets.” Comparably important soft magnets are useful for directing magnetic fields and can be very easily (de)magnetized. As such, they typically have a coercivity < 12.5 Oe (1000 A/m), and specialized very soft magnets can have coercivities < 0.00125 Oe (1 A/m). Some common applications include coil cores, transformer cores, and magnetic shielding. Additionally, they are important for many AC electrical applications such as inductors, filters, and resonators, particularly at high frequencies up to and including microwaves.

36 MATERIALS SCIENCE↗
DOE OSTI2021

System and method for controlling oxidation of metals during freeform casting

A system is disclosed for printing a component. The system may have a nozzle controlled for movement within a plane. The nozzle may be configured to dispense a molten metal. A substrate may be positioned within a reservoir. The substrate may receive the molten metal to form the component in a printing operation. A heated barrier material in a molten state may be contained within the reservoir for forming a liquid barrier between an atmosphere and the substrate. The nozzle has a tip which is submerged within the liquid barrier while dispensing the molten metal during the printing operation. The liquid barrier forms a barrier between an atmosphere in a vicinity of the substrate and the substrate.

Pascall, Andrew J.↗
DOE OSTI2020

Suppression of low temperature magnetic ordering in samarium nanoparticles

The role of finite size effects on magnetic order has been investigated in samarium nanoparticles prepared by physical vapor deposition. In this study, a dense layer composed of distinct nanoparticles with a mean particle diameter of 26 nm was deposited on a diamagnetic substrate. M(T) measurements identify the expected pair of antiferromagnetic ordering temperatures in the bulk Sm precursor, at 113 K and 14 K, where the magnetic unit cell for the lower ordering temperature is 10.36 nm along the c-axis. The high temperature ordering of the hexagonal sites in the Sm nanocrystals is slightly decreased with respect to that of bulk Sm, while the low temperature transition associated with the cubic sites is significantly suppressed. The observed changes are attributed to finite size effects, with ordering suppressed as the particle radius approaches the length of the magnetic unit cell, and surface moments become more prominent.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗