Engineering topics
McCandless, Sarah Elizabeth
Publications and source records attributed to McCandless, Sarah Elizabeth.
On-Orbit Contingency Plan for the Mars 2020 Mission
NASA’s Mars 2020 mission successfully launched to Mars July 30, 2020. An on-orbit contingency plan was developed to accomplish a controlled re-entry of the spacecraft in the event of a launch vehicle anomaly. The entire launch period was assessed, and satisfactory de-orbit burns were designed for every launch opportunity. An operational implementation was created for rapid adoption if needed, and validated using information from the Gravity Recovery and Climate Experiment (GRACE) satellites. This paper presents the orbit determination models and filter strategies used to conduct the pre-launch analyses, as well as the operational implementation validation methodologies and results.
Mars 2020 Navigation Performance
On February 18, 2021, the Perseverance rover and Ingenuity helicopter demonstration landed at Jezero Crater. The Entry, Descent, and Landing (EDL) architecture, largely the same used to land Curiosity at Gale Crater on August 6, 2012, required high-fidelity flight dynamics simulation with two independent tools to verify performance. The process for creating the EDL simulation using the Dynamics Simulator for Entry, Descent and Surface landing (DSENDS) tool will be discussed, along with its use for for independent verification of the EDL statistical analysis results and reference trajectory simulation. Analysis and usage details both in development and cruise, along with post-landing assessment of the prediction performance of the simulation, will also be discussed.
Mars 2020 Perseverance trajectory reconstruction and performance from launch through landing
The Mars 2020 (M2020) Mission carrying Perseverance, the most advanced rover ever sent to Mars, successfully launched on an Atlas V 541 (AV-088) launch vehicle from the Eastern Test Range (ETR) at Cape Canaveral Air Force Station (CCAFS) in Florida at 11:50:00 UTC (T-Zero time) on July 30, 2020. After some station reconfiguration, carrier/telemetry were locked at both Deep Space Network (DSN) Canberra and Goldstone stations. Perseverance entered the Martian atmosphere at 20:36:50 Spacecraft Event Time (SCET) UTC, and landed inside Jezero Crater at 20:43:49 SCET UTC on February 18, 2021. Confirmation of nominal landing was received at the DSN Goldstone and Madrid tracking stations via the Mars Reconnaissance Orbiter at 20:55:11 Earth Received Time (ERT) UTC. This paper summarizes in detail the actual vs. predicted performance in terms of launch vehicle events, launch vehicle injection performance, actual DSN spacecraft lockup, trajectory correction maneuver performance, Entry, Descent, and Landing events, and overall trajectory and geometric characteristics.
Orbit Determination for the Mars 2020 Mission
NASA’s Mars 2020 Mission successfully executed its Martian entry, descent, and landing sequence on February 18, 2021. Spacecraft navigation guided the spacecraft from its launch injection to entry into the Martian atmosphere; to do so, three trajectory correction maneuvers and two onboard state updates were performed. Navigation was required to provide an entry state with a maximum uncertainty of 2.8 km in position and 2.0 m/sec in velocity (3-σ); the flight performance was approximately 900 m and 66 cm/sec (3-σ). This paper presents the orbit determination models, measurements, filter strategies and performance throughout launch, cruise and Mars approach.
Mars 2020 Perseverance Trajectory Reconstruction and Performance from Launch through Landing
The Mars 2020 (M2020) Mission carrying Perseverance, the most advanced rover ever sent to Mars, successfully launched on an Atlas V 541 (AV-088) launch vehicle from the Eastern Test Range (ETR) at Cape Canaveral Air Force Station (CCAFS) in Florida at 11:50:00 UTC (T-Zero time) on July 30, 2020. After some station reconfiguration, carrier/telemetry were locked at both Deep Space Network (DSN) Canberra and Goldstone stations. Perseverance entered the Martian atmosphere at 20:36:50 Spacecraft Event Time (SCET) UTC, and landed inside Jezero Crater at 20:43:49 SCET UTC on February 18, 2021. Confirmation of nominal landing was received at the DSN Goldstone and Madrid tracking stations via the Mars Reconnaissance Orbiter at 20:55:11 Earth Received Time (ERT) UTC. This paper summarizes in detail the actual vs. predicted performance in terms of launch vehicle events, launch vehicle injection performance, actual DSN spacecraft lockup, trajectory correction maneuver performance, Entry, Descent, and Landing events, and overall trajectory and geometric characteristics.
Mars 2020 mission design and navigation overview
Following the exceptionally successful Mars Science Laboratory mission which placed the Curiosity rover in the interior of Gale Crater in August 2012, NASA will launch the next rover in the 2020 Earth to Mars opportunity arriving to the Red Planet in February 2021 to explore areas suspected of former habitability and look for evidence of past life. This paper details the mission and navigation requirements set by the Project and how the final mission design and navigation plan satisfies those requirements.
InSight attitude control system thruster characterization and calibration for successful navigation to Mars
In order for the InSight spacecraft to execute a safe Mars landing, it was crucial that the navigation team accurately predict the trajectory and deliver the spacecraft to the targeted atmospheric entry point. One of the primary challenges faced by the Navigation Team was the accurate reconstruction and prediction of small but frequent velocity changes imparted by the spacecraft’s Attitude Control System thrusters. This paper discusses the in-flight thruster calibration campaign, the reconstruction and prediction of accelerations throughout various phases of cruise (including compensating for significant outgassing after launch and attitude transition), and the subsequent impact on atmospheric entry point delivery
Maneuver design overview of the 2018 InSight Mars lander mission
Launched on May 5, 2018, the Interior Exploration using Seismic Investigations, Geodesy, and Heat Transport (InSight) spacecraft landed safely on Mars on November 26, 2018. To deliver the lander accurately to the landing site, six trajectory correction maneuvers (TCMs) were planned along the reference trajectory from Earth launch to Mars entry. For the last two TCMs, there were two corresponding contingency TCMs planned that could be executed in the event that the corresponding nominal one failed. There were also twenty pre-designed menu TCMs available for execution at the time of the last contingency TCM, about 8 hours before the Mars entry, descent, and landing. This navigation paper overviews the maneuver design of each TCM, as well as how each one actually performed during operations.
InSight orbit determination
The InSight mission relied on accurate deep-space navigation for a successful Mars landing on November 26, 2018. In this paper, we discuss the role of the cruise Orbit Determination team, whose responsibilities included determining the spacecraft state, predicting the future trajectory, and quantifying the uncertainty associated with those estimates. In particular, we will focus on spacecraft dynamic modeling, small forces due to attitude control, radiometric tracking data, filter strategies, uncertainty quantification, and responses to unexpected flight situations. We will also provide analysis of reconstructed maneuvers, small forces, and delivery accuracy at Mars arrival.
Navigation performance of the 2018 InSight Mars Lander mission
The NASA InSight spacecraft was launched successfully from Vandenberg Air Force Base on an Atlas V 401 launch vehicle on May 5, 2018 and landed on November 26, 2018. Accurate targeting to the atmospheric entry point by the Navigation team achieved by carefully controlling the final entry flight path angle to -12.0 degrees with a tolerance of +/- 0.21 degrees. This paper will describe how the InSight Navigation team met this difficult task in the presence of frequent unbalanced thrusting for attitude control. The continuous correction for this unplanned ∆V far exceeded pre-launch expectations and proved a challenge to predict accurately.
Analyzing feasibility of optical communication observables for navigation
This paper discusses the formulation of the data types and their success in meeting mission requirements for two mission scenarios: a network of spacecraft in orbit about Mars and a spacecraft in a halo orbit at the Earth-Sun L1 Lagrange point.
InSight Attitude Control System Thruster Characterization and Calibration for Successful Navigation to Mars
UNKNOWN