Search NASA⌕ Search

Engineering topics

McCoy, John D.

Publications and source records attributed to McCoy, John D..

Determining the Reaction Kinetics and Thermodynamics of a Diels–Alder Network Using Dynamic Gel Criteria

We undertook a detailed rheological investigation to evaluate the kinetic parameters of the forward and reverse Diels–Alder (DA) reactions of a model network cross-linked using a furan prepolymer and a common aromatic bismaleimide. At high temperature where the Winter–Chambon’s criterion of frequency-independence was more applicable, a multiwave technique permitted van’t Hoff analysis and calculation of the reaction thermodynamic parameters, specifically the enthalpy and entropy of the reaction: ΔH° = –38.3 ± 5.2 kJ mol –1 and ΔS° = –94.3 ± 13.4 J mol –1 . At mild temperatures where the G'–G" crossover point is experimentally convenient to measure gelation, isothermal tests were used to obtain reasonable fDA kinetic parameters from Eyring analysis such as the apparent activation enthalpy and entropy of ΔH$^{‡}_{fDA}$ = 76.8 ± 6.9 kJ mol –1 and ΔS$^{‡}_{fDA}$= –82.8 ± 22.2 J mol –1 K –1 . Comparable rheokinetic methods include cross-linking density measurements and stress relaxation tests to calculate effective kinetics, whereas the critical gel conversion was consistently applied here. As a result, rate data are fitted with the Arrhenius equation for comparison purposes and the Eyring equation to demonstrate its broader utility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diels–Alder Augmented Epoxies with Plasmonic Nanoparticle Fillers for Efficient Photothermal Depolymerization

Thermally reversible epoxies through the Diels–Alder (DA) reaction have been used for applications such as recycling, self-healing, and 3D printing. Depolymerization by bulk heating, however, would be a slow and inefficient process due to its low thermal conductivity. In this paper, photothermal conversion using refractory plasmonic titanium nitride (TiN) nanoparticles was employed for efficient and rapid depolymerization of reversible epoxies. TiN nanoparticles have superior thermal stability, broader light absorption, and higher light-to-heat conversion efficiency. They are also less expensive than more common plasmonic gold nanoparticles. Photothermal behavior of TiN nanoparticle-filled reversible epoxies was investigated as a function of concentration of TiN nanoparticles and as a function of the intensity of a light source. TiN nanoparticles could induce sufficient heat for depolymerization with a trace content, 0.01% by weight, under a broad-spectrum white light of intensity 1760 mW/cm 2 instead of a strong light source such as a laser. The reversible epoxies were prepared by a reaction between furan precursors and a bismaleimide compound. Crosslinking density was controlled by altering the architecture of furan precursors and the feed ratio between the furan precursor and the bismaleimide compound. These changes in chemical structure and degree of crosslinking permit the control of the thermomechanical properties of the reversible epoxy from soft elastomers to hard elastomers. Here, the reversible epoxies display a flow region at around 110 °C. Depolymerization through the retro-DA was confirmed by Fourier transform infrared spectroscopy as a function of duration at a high temperature. Light-induced removability and recyclability were demonstrated by adhesion tests using the reversible epoxy/nanoparticle composites.

36 MATERIALS SCIENCE↗