Search NASA⌕ Search

Engineering topics

McGlasson, Alex

Publications and source records attributed to McGlasson, Alex.

Shape-recovering liquids

Binding particles to an interface between immiscible liquids to reduce interfacial tension underpins the emulsification and phase behaviour of composite liquid systems. Nevertheless, we found that the strong binding and two-dimensional assembly of ferromagnetic particles at a liquid–liquid interface not only suppresses emulsification but also increases interfacial tension. Consequently, the particle-stabilized interface in a cylindrical vessel rapidly and reproducibly adopts the shape of a Grecian urn after vigorous agitation. The suppression of emulsification, the rapid formation of a stable, non-planar equilibrium interface shape and the increase in interfacial tension all originate from attractive in-plane dipolar magnetic interactions between the particles.

Raykh, Anthony↗

Langmuir adsorption model to assess the impact of silane coupling on nano-dispersion of silica in SBR

Surface active agents are often used to improve dispersion of nanoparticles. Quantitative correlation between these surface-active molecules and nanoscale dispersion is absent from the literature partly because a quantitative measure of nanoscale dispersion does not exist. Recently, we have developed the Virial-van der Waals method to quantify dispersion in nanocomposites using virial coefficients. In this paper, the Langmuir adsorption model is used to quantify the influence of surface-active agents on nano-scale dispersion in terms of the effective second virial coefficient B 2 *. The impact of silane coupling agent on the nano-dispersion and silica aggregate structure in precipitated silica/SBR nanocomposites is demonstrated. It is shown that the higher viscosity SBR matrix led to a greater silica aggregate structural breakup, while lower viscosity matrix improved surface silanization. The isomeric content of the SBR, which impacts the dielectric behavior, impacted whether the system could be modeled through a mean-field or specific interactions. We earlier showed that larger aggregates improve dispersion, and this is reaffirmed in these results. After account is made for aggregate size, nano-scale dispersion improves with the addition of silane coupling agent. The behavior is well modeled using Langmuir monolayer adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

3D Printing of Aqueous Two-Phase Systems with Linear and Bottlebrush Polyelectrolytes

In this study, we formed core–shell-like polyelectrolyte complexes (PECs) from an anionic bottlebrush polymer with poly (acrylic acid) side chains with a cationic linear poly (allylamine hydrochloride). By varying the pH, the number of side chains of the polyanionic BB polymers (Nbb), the charge density of the polyelectrolytes, and the salt concentration, the phase separation behavior and salt resistance of the complexes could be tuned by the conformation of the BBs. By combining the linear/bottlebrush polyelectrolyte complexation with all-liquid 3D printing, flow-through tubular constructs were produced that showed selective transport across the PEC membrane comprising the walls of the tubules. These tubular constructs afford a new platform for flow-through delivery systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

From solid surfactants to micromotors: An overview of the synthesis and applications of heterogeneous particles

Colloid science has classically concerned itself with the investigation of the properties of dispersed phases in a bulk medium. This has led to the development of a rich amount of chemistry, physics, and engineering that have facilitated the evolution and maturation of this field. One of the many developments made over the last 30 years is the introduction of particles that are heterogeneous in chemistry and shape. These heterogeneities can introduce behaviors that are not achievable in homogeneous systems and that are specific to the type and class of nonuniformity. This has led to the development of numerous technologies, two of which are Janus micromotors and solid surfactants. Here, this review aims to familiarize the reader with the field of heterogeneous particles. We begin with an overview of various synthetic methods to produce colloidal particles that are heterogeneous in chemistry and shape. We then discuss their use as solid surfactants and autonomous micromotors. We then close by summarizing and providing a future perspective on the field.

36 MATERIALS SCIENCE↗

On the Interfacial Assembly of Anisotropic Amphiphilic Janus Particles

It has been shown both theoretically and experimentally that amphiphilic Janus particles are the most effective solid surfactants to stabilize interfaces. In most cases, the Janus particles investigated have uniform morphologies with Janus boundaries dividing the particle into halves. However, there are many examples of Janus particles where the hydrophilic and hydrophobic domains are not equally distributed. The effects of this uneven domain distribution on the mechanism and kinetics of Janus particle assembly, and final equilibrium state are not well-understood. Dynamic pendant drop tensiometry offers a means to probe both the equilibrium assembly and the kinetics and mechanism of assembly. Here, in this work, the interfacial kinetics and assembly of spherical anisotropic Janus particles are investigated using dynamic pendant drop tensiometry. Systematic studies quantifying the time-dependent interfacial behavior as a function of Janus particle morphology, chemical composition, particle concentration, and NaOH and HCl concentration are performed. These studies shed light on the assembly mechanism of more complex Janus particle morphologies and highlight their effectiveness as interface stabilizers.

36 MATERIALS SCIENCE↗

Mixed Nanosphere Assemblies at a Liquid–Liquid Interface

The in-plane packing of gold (Au), polystyrene (PS), and silica (SiO 2 ) spherical nanoparticle (NP) mixtures at a water–oil interface is investigated in situ by UV–vis reflection spectroscopy. All NPs are functionalized with carboxylic acid such that they strongly interact with amine-functionalized ligands dissolved in an immiscible oil phase at the fluid interface. This interaction markedly increases the binding energy of these nanoparticle surfactants (NPSs). The separation distance between the Au NPSs and Au surface coverage are measured by the maximum plasmonic wavelength (λ max ) and integrated intensities as the assemblies saturate for different concentrations of non-plasmonic (PS/SiO 2 ) NPs. Further, as the PS/SiO 2 content increases, the time to reach intimate Au NP contact also increases, resulting from their hindered mobility. λ max changes within the first few minutes of adsorption due to weak attractive inter-NP forces. Additionally, a sharper peak in the reflection spectrum at NP saturation reveals tighter Au NP packing for assemblies with intermediate non-plasmonic NP content. Grazing incidence small angle X-ray scattering (GISAXS) and scanning electron microscopy (SEM) measurements confirm a decrease in Au NP domain size for mixtures with larger non-plasmonic NP content. The results demonstrate a simple means to probe interfacial phase separation behavior using in situ spectroscopy as interfacial structures densify into jammed, phase-separated NP films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dispersion of modified fumed silica in elastomeric nanocomposites

In polymer nanocomposites, surface modification of silica aggregates can shield Coulombic interactions that inhibit agglomeration and formation of a network of agglomerates. Surface modification is usually achieved with silane coupling agents although carbon-coating during pyrolytic silica production is also possible. Pyrogenic silica with varying surface carbon contents were dispersed in styrene-butadiene (SBR) rubber to explore the impact on hierarchical dispersion, the emergence of meso-scale structures, and the rheological response. Pristine pyrogenic silica aggregates at concentrations above a critical value (related to the Debye screening length) display correlated meso-scale structures and poor filler network formation in rubber nanocomposites due to the presence of silanol groups on the surface. Here, in the present study, flame synthesized silica with sufficient surface carbon monolayers can mitigate the charge repulsion thereby impacting network structural emergence. The impact of the surface carbon on the van der Waals enthalpic attraction, a * , is determined. The van der Waals model for polymer nanocomposites is drawn through an analogy between thermal energy, k B T, and the accumulated strain, γ. The rheological response of the emergent meso-scale structures depends on the surface density of both carbon and silanol groups.

36 MATERIALS SCIENCE↗

Quantification of Dispersion for Weakly and Strongly Correlated Nanofillers in Polymer Nanocomposites

The dispersion of nanoparticles in viscous polymers is dictated by kinetics, interaction potentials between particles, and interfacial compatibility between the matrix and dispersed phases. It was previously proposed that an analogy can be made between thermally dispersed colloids and kinetically dispersed nanoparticles in viscous media when weak interactions exist between particles allowing for a mean-field description under the Ginzburg criterion such as for carbon black dispersed in polybutadiene elastomer. For these cases, the second virial coefficient can be used to quantify the quality of dispersion; additionally, the nanoscale network mesh size can be calculated, which is related to dynamic properties. However, this approach fails for nanoparticles with surface charges or other specific interactions that lead to correlations. Here, these correlated systems are investigated in the context of the mean-field systems in order to gain a comparative description of dispersion using the network mesh size and a derived virial coefficient. The physical origin of the structural parameters from the proposed model for these correlated systems is investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effects of staged mixing on the dispersion of reinforcing fillers in elastomer compounds

Kinetically mixed reinforcing fillers are dispersed by accumulated strain. Processing conditions such as mixing geometry, intensity and the duration of mixing are key elements that control accumulated strain. A simple method to modify mechanical mixing is the mixing schedule which involves the timing of filler additions to a compound. For example, it is known that simultaneous addition of oil with filler is disadvantageous to dispersion, while the incorporation of oil after filler addition enhances dispersion. The simplest case of mixing schedule involves timed filler additions into an elastomer, for instance in a single stage or in two-stages. This study reported herein explores the effects of staged mixing on nanoscale dispersion based on a colloidal model. Dispersion is quantified using a pseudo-thermodynamic approach coupled with ultra-small angle X-ray scattering. It was found that single stage mixing yields optimal nano-dispersion for carbon-coated silica and carbon black in polybutadiene using an internal mixer.

36 MATERIALS SCIENCE↗

A thermal model to describe kinetic dispersion in rubber nanocomposites: The effect of mixing time on dispersion

Nanocomposites can be produced by a variety of processes. A common approach used in industry is to mix a viscous polymer such as an elastomer compound, with nanofillers in a Brabender mixer or in a calendar. Dispersion has been quantified using a mixing index, DR, that is based on micrographs of reinforced elastomers on the micron-scale. A recently observed technique based on x-ray scattering allows for an alternative nano-scale description of dispersion based on a thermal-dispersion model where an analogy is made between temperature for thermal dispersion and nanocomposite processing conditions such as mixing time, mixing geometry, and viscosity for kinetic dispersion. In this paper the impact of mixing time on dispersion is explored taking advantage of the van der Waals equation to describe excluded volume and interaction energy in the dispersion. It is found that the thermal-dispersion analogy is well behaved and can determine the wetting time for nano-scale incorporation of elastomer into filler. The nano-scale excluded volume depends only on the filler type and does not seem to be sensitive to bound rubber. The pseudo-interaction energy is strongly dependent on viscosity and polymer chemistry. The thermal-dispersion model offers a novel approach to understanding kinetic dispersion in nanocomposites.

36 MATERIALS SCIENCE↗

Impact of an Emergent Hierarchical Filler Network on Nanocomposite Dynamics

Aggregated polymer fillers, such as carbon black and silica, at concentrations above the percolation threshold form an emergent structure, the hierarchical filler network, in immiscible systems where dispersion is driven by accumulated strain. It is proposed that the hierarchical filler network is composed of a primary nanoscale network that locally percolates at ~5 vol % of aggregates, associated with changes in the dynamic spectrum at low strain, and a secondary micrometer-scale network that globally percolates at ~20 vol % associated with the Payne effect and electrical conductivity. A model is proposed with an elastomer dominated dynamic response described by Einstein–Smallwood behavior at high frequencies and small sizes and a filler network dominated response at low frequencies and large sizes. The nanoscale mesh size correlates with this transition in low strain dynamic response. The micrometer-scale network displays a gel-like dynamic response at very low frequencies and a corresponding gel-like structural scaling regime at large sizes. In conclusion, the hierarchical filler network is described by two crossover frequencies and associated relaxation times, τ* and τ cc , and two related structural scaling regimes.

36 MATERIALS SCIENCE↗