Search NASA⌕ Search

Engineering topics

McGrath, W.

Publications and source records attributed to McGrath, W..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Tantalum hot-electron bolometers for low-noise heterodyne receivers

We describe superconducting diffusion-cooled hot-electron bolometers that were fabricated fromtantalum films grown on a thin niobium seed layer. The seed layer promotes single-phase growth of the Ta films, resulting in high-quality bolometers with transition temperatures up to 2.35 K and transition widths of less than 0.2 K. An S-parameter measurement set-up in a He-3 cryostat was used to measure device impedance versus frequency of a 400 nm long device at a temperature of 400 mK. It is shown that a 3 dB roll-off frequency of about 1 GHz can be achieved when the device resistance matches the impedance of the embedding network (no electrothermal feedback). This would lead to a prediction of 16 GHz for a 100 nm device, and indicates that a heterodyne mixer using a Ta HEB should be able to operate at several GHz even with a significant amount of electrothermal feedback.

bolometer superconductor tantalum↗
NASA NTRS2001

Novel multiplexing technique for detector and mixer arrays

Future space submillimeter telescopes will require large-format imaging detector arrays to perform state-of-the-art astronomical observations. A crucial issue related to a focal plane array is a readout scheme which is combatible with large numbers of cryogenic detectors elements.

submillimeter↗
NASA NTRS1999

Submicron-Long HTS Hot-Electron Mixers

We have measured the device length and temperature dependence of the intermediate frequency (IF) bandwidth and noise of hot-electron bolometert (HEB) mixers made from a high-T***subc*** superconductor.

hot-electron↗