Search NASA⌕ Search

Engineering topics

McKenna, Gregory B.

Publications and source records attributed to McKenna, Gregory B..

At least 19 records

Investigation of the structure, filler interaction and degradation of disulfide elastomers made by Reversible Radical Recombination Polymerization (R3P)

In this paper we report the synthesis and analysis of cyclic polydisulfides, their redox depolymerization as well as their interaction with carbon black. Cyclic poly(3,6-dioxa-1,8-octanedithiol)s (pDODT) were synthesized by Reversible Radical Recombination Polymerization (R3P). R3P is a scalable “green” polymerization process using triethylamine (TEA), H 2 O 2 and air for the polymerization of dithiol monomers. pDODTs were synthesized in 5 and 20 g batches. The effect of peroxide concentration (3, 5, 10, 20, 30%) was investigated. It was found that the molecular weights increased exponentially with increasing peroxide concentrations. At 30% peroxide concentration pDODTs with M n up to 400,000 g/mol and polydispersity of 2 were obtained. 700 and 800 MHz NMR were used for investigating the chemical structure of the polymers. The absence of thiol end group signals in polymers made with > 10wt % H 2 O 2 and M n < 100,000 g/mol, including a sample of a fractionated polymer with starting Mn = 600,000 g/mol, verified cyclic structures. Dithiothreitol reduced the polymers to monomer and a small percentage of oligomers. Carbon black was shown to increase the moduli of high molecular weight pDODTs. Swelling tests in chloroform showed that polymers made with 20 and 30w% peroxide swelled 14 and 10 times of their starting weight without dissolving, indicating chemical interaction between the polymers and carbon black. In conclusion, further analysis of these interesting elastomers, available at the 20 g scale, is in progress.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polymer Macrocycles: A novel topology to control dynamics of rubbery materials (Final Report)

We have successfully made synthetic polymer rings that are larger than previously reported having entanglement numbers as high as Z w ≈300 if the rings entangled as do linear chains. The synthesis was carried out using reversible radical recombination polymerization (R3P) of dithiols which produces a polymer with a very small persistence length. The reported results show surprising dilute solution behaviors due to the fact that polymeric rings expand more than their linear counterparts for polymer chains having a large number of persistence lengths, as developed in this study. The results strongly argue for a systematic investigation of the dilute solution properties of rings having different persistence lengths in different quality solvents, where the theta-condition should lead to results that are independent of the persistence length. For the rheological investigations related to chain entanglements, the polyDODT rings could be diluted so that the rheological data covered from less than one entanglement spacing relative to the linear counterpart to a value of Z w =300. Importantly, because we were able to dilute extremely high entanglement number polyDODT rings to a similar entanglement number as those reported for polystyrene rings that were highly purified using LCCC, we demonstrated that the dynamics of the polyDODT rings virtually overlaps with the dynamics of the polystyrene rings which is very strong evidence that these high molecular weight polyDODT rings are of high purity. Our results demonstrate that the onset of entanglement in rings, as evidenced by the appearance of a rubbery plateau G N 0 and by the onset of a strong power-law dependence of the viscosity on molecular weight (η~M w 5.8 ) or entanglement number (η~Z w 5.8 ), occurs at much higher molecular weights or polymer concentrations than is the case for linear chains. These results should serve as a benchmark for future investigations of the behavior of entangled, circular macromolecules.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Polymer Macrocycles: A novel topology to control dynamics of rubbery materials

We have successfully made synthetic polymer rings that are larger than previously reported having entanglement numbers as high as $Z_w$≈300 if the rings entangled as do linear chains. The synthesis was carried out using reversible radical recombination polymerization (R3P) of dithiols which produces a polymer with a very small persistence length. The reported results show surprising dilute solution behaviors due to the fact that polymeric rings expand more than their linear counterparts for polymer chains having a large number of persistence lengths, as developed in this study. The results strongly argue for a systematic investigation of the dilute solution properties of rings having different persistence lengths in different quality solvents, where the theta-condition should lead to results that are independent of the persistence length. For the rheological investigations related to chain entanglements, the polyDODT rings could be diluted so that the rheological data covered from less than one entanglement spacing relative to the linear counterpart to a value of $Z_w$=300. Importantly, because we were able to dilute extremely high entanglement number polyDODT rings to a similar entanglement number as those reported for polystyrene rings that were highly purified using LCCC, we demonstrated that the dynamics of the polyDODT rings virtually overlaps with the dynamics of the polystyrene rings which is very strong evidence that these high molecular weight polyDODT rings are of high purity. Our results demonstrate that the onset of entanglement in rings, as evidenced by the appearance of a rubbery plateau $G_N^0$ and by the onset of a strong power-law dependence of the viscosity on molecular weight (η~$M_w^{5.8}$) or entanglement number (η~$Z_w^{5.8}$), occurs at much higher molecular weights or polymer concentrations than is the case for linear chains. These results should serve as a benchmark for future investigations of the behavior of entangled, circular macromolecules.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Linear Viscoelastic Properties of Putative Cyclic Polymers Synthesized by Reversible Radical Recombination Polymerization (R3P)

Linear viscoelastic properties in both melt and solution states are reported for a series of poly(3,6-dioxa-1,8-octanedithiol) (polyDODT) made by reversible radical recombination polymerization (R 3 P) under conditions designed to produce linear (LDODT), cyclic (RDODT) and linear-cyclic mixtures (LRDODT). PolyDODT is amorphous (T g < -50 °C) and highly flexible (entanglement molecular weight M e,lin ≈ 1850 g/mol for LDODT). PolyDODT’s low T g and low M e,lin enable characterization over a wide dynamic range and a wide range of dimensionless weight-average molecular weight Z w = M w /M e,lin . Measurements at temperatures from -57 °C to 100 °C provide up to 18 deades of reduced frequency, which is necessary to characterize RDODT melts with Z w from 23 to 300. The two highest molecular weight polymers in the present RDODT series have such high M w (406k and 556k g/mol) that mass spectrometry, NMR spectroscopy, and even chemical assays for chain ends are unable to rule out up to 2 mol% linear contaminant. By studying the samples in solution (using dilution to reduce Z w ) we could compare their dynamics with those of previously established high-purity polystyrene (PS) rings (limited to Z w ≤ 13.6). RDODT solutions with Z w < 15 (concentrations <5wt% for RDODT-406k and 556k) have dynamic moduli G^* that accord with LCCC-purified PS rings in terms of the frequency dependence (including the absence of a plateau), the progression of shapes of G* as a function of Z w , and the linear scaling of their zero-shear viscosity η0 with M w . The shape of G* as a function of Z w for solutions of RDODT-406k and -556k also accord with lower M w RDODT melts (which have ≤ 1.3mol% linear contaminant). Thus, measurement of the linear viscoelastic properties of appropriate concentrations of high M w (>200k g/mol) putative cyclic polymers, in which linear chains evade spectroscopic detection, may provide an alternative means (though not fully proven) of validation of sample purity. When Z w > 15 (including all seven RDODT melts and eight of their solutions), G* has a rubbery plateau. This suggests that the onset of entanglement-like behavior in rings requires 4-5-fold greater Z w than is required for linear chains. Further, the plateau moduli of RDODT samples are indistinguishable from G N o of the corresponding LDODT (melt or matched-concentration solutions). In entangled linear polymers, the observation that G N o is independent of Z w follows from limitations on lateral fluctuations due to neighboring chains becoming independent of position along a given chain. The present results for RDODT suggest that this holds for sufficiently long endless chains, too. While the RDODT have the same G N o as entangled LDODT, when Z w > 60 the terminal relaxation, if reached at all, of RDODT extends to orders of magnitude lower frequency than an entangled linear polymer of the same Z w . Consequently, the viscosity of RDODT with Z w > 60 increases with Z w much more strongly than the 3.4-power observed for entangled linear polymers. Lastly, these novel polymers, with disulfide-linked backbone and broad relaxation time distribution may prove important in relation to biodegradable elastomers and materials with exceptional low-frequency dissipation, extending at least 12 decades below the onset of the rubbery plateau.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Amorphization and Crystallization of Hexanitroazobenzene (HNAB) Using Conventional DSC and Flash DSC

Abstract The present work presents results from an investigation of the glass transition and crystallization behaviors of HNAB tested over more than five orders of magnitude of cooling rate from 0.005 °C/s to 600 °C/s (0.3 to 36000 °C/min) by a combination of conventional and Flash differential scanning calorimetry (DSC). The work quantifies the influence of the thermal amorphization route on the properties of this high explosive. Cooling rates faster than 100 °C/s (6000 °C/min) result in amorphous HNAB as expected from prior work, but we also find that amorphization of the HNAB occurs at cooling rates slower than 0.008 °C/s (0.5 °C/min). The behavior of the amorphous HNAB made by slow cooling is compared with that of amorphous HNAB made by fast cooling, as well as with that made by solvent casting in terms of glass transition temperature, apparent activation energy of glass transition, and dynamic fragility parameter m . Besides, the non‐isothermal crystallization response as a function of cooling rate is also reported. The thermal stability and decomposition energy of amorphous HNAB are compared with those of the crystalline counterpart, being similar heats of decomposition of 3295 and 3392 J/g, respectively; suggesting that the amorphous HNAB will have similar thermal stability and chemical energy to the crystalline form.

Koh, Yung P.↗

Comment on Comment on “Anomalous structural recovery in the near glass transition range in a polymer glass: Data revisited in light of temperature variability in vacuum oven‐based experiments”*

Abstract Cangialosi, Alegría, and Colmenero have made a comment on a paper of ours [Polym. Eng. Sci. 2022:1–13], in which we discussed the concern that the enthalpy recovery data reported by Cangialosi and co‐workers [Phys. Rev. Lett. 2013;111(9):095701] for polystyrene aged up to 15 K below glass transition temperature was anomalous and contradicted existing experimental results from the literature over a similar range of aging conditions. Their response shifts the focus away from the raised questions about their experimental results and attempts to invalidate the data that we cited in support of our argument. Here we respond to the comment and add additional analysis that suggests the structural recovery response of glassy materials exhibits smooth behavior over the full range of measurements, up to 7 or 8 logarithmic decades. We do this by referring to the work on the intrinsic isotherm down‐jump and memory responses of poly(vinyl acetate) between 40°C and 15°C over six logarithmic decades by Kovacs [Fortsch. Hochpolym. Fo. 1963;3(1/2):394–508], the small‐strain tensile creep of poly(vinyl chloride) quenched from 90°C to 40°C (approximately 40°C below T g ) over seven logarithmic decades from Struik [Polym Eng. Sci., 1977;17:165–173], and the volume recovery behavior for aging times up to 3 months in a temperature range between 95°C and −50°C by Greiner and Schwarzl [Rheol. Acta. 1984;23(4):378–395]. We also add discussion that an isothermal aging procedure using a vacuum oven is highly vulnerable to temperature errors due to the problem of good temperature control when the heat transfer mechanism is primarily radiative.

Jin, Shuang↗

Anomalous structural recovery in the near glass transition range in a polymer glass: Data revisited in light of temperature variability in vacuum oven‐based experiments*

Abstract There is considerable interest in data reported by Cangialosi et al. [Cangialosi, D., Boucher, V. M., Alegría, A., & Colmenero, J. (2013). Physical Review Letters , 111 (9), 095701] that purportedly showed unusual irregular responses in the isothermal structural recovery behavior of glasses because the observation challenges the general view of the dynamics being smooth functions of time as observed in extensive dilatometric experiments by Kovacs [Kovacs, A. J. (1964). In Fortschritte der Hochpolymeren‐Forschung , 3 , 394–507. Springer, Berlin, Heidelberg.] in the 1960s. The reported data show an apparent two mechanism structural (enthalpy) recovery at aging temperatures ranging from 6 to 17 K below which is also controversial as it could not be reproduced in work from Koh and Simon [Koh, Y. P., & Simon, S. L. (2013). Macromolecules , 46(14), 5815–5821.] where a second plateau observed in the enthalpy loss curve was not reproduced in nearly 1‐year‐long experiments at 15 K below . Therefore, it is important to determine what might be possible reasons for the apparent non‐smooth relaxations. Here, we examine the possibility that the poor temperature control of a typical vacuum oven could explain the anomalous results. We used the Tool–Narayanaswamy–Moynihan (TNM) model of structural recovery to calculate the effect of typical vacuum oven temperature variation on the structural recovery of polystyrene and find that we can reproduce the reported experimental results. The issue of temperature control using a vacuum oven is discussed, and data from thermocouple measurements of temperature at various locations inside a vacuum oven are shown.

36 MATERIALS SCIENCE↗

PolyDODT: a macrocyclic elastomer with unusual properties

The effect of reaction conditions on the structure of poly(3,6-dioxa-1,8-octanedithiol) (polyDODT) made by Reversible Radical Recombination Polymerization (R3P) using triethylamine (TEA), H 2 O 2 and air was investigated. 800 MHz (1 and 2D) NMR was used to investigate the polymer structures. Sensitivity analysis provided direct evidence for high purity cyclic polyDODT up to M n ~ 100 000 g mol –1 . Here, comparative analysis by High Resolution Multidetector Size Exclusion Chromatography (SEC) using integrated data showed that the cycles had lower viscosity and were more compact (both for R g and R h ) than linear samples of similar molecular weight. However, differential data revealed unusual behavior. While lower molecular weight cyclic polymers eluted later and had lower intrinsic viscosity than their linear counterparts at the same molecular weight, at higher molecular weights the polymers showed strange behavior: both the diffusion coefficient measured by Quasielastic Light Scattering (QELS) and Mark–Houwink–Sakurada plots of intrinsic viscosity for linear and cyclic polyDODT were found to converge. R3P, an aqueous based “green” method is capable of producing polymers at the 10–100 g scale in the lab, which will allow more detailed studies of this new class of biodegradable elastomers so further experimentation can be performed to elucidate the reasons for the unusual findings.

36 MATERIALS SCIENCE↗

Deep glassy state dynamic data challenge glass models: Elastic models

The idea of an “ideal” glass transition temperature has persisted at least since the work from Kauzmann when it was observed that the entropy of glass-forming liquids extrapolated to below that of the crystal, thus suggesting the need for a phase transition at a finite or non-zero absolute temperature. This thermodynamic paradox was also found to be related to the observations of a diverging of the extrapolated viscosity or relaxation times at a temperature near to this ideal glass transition. Recently, however, we have carried out experiments using both an ancient amber material and an ultra-stable amorphous fluoropolymer that challenge the ideas of the divergence of the viscosity or relaxation times at this ideal glass transition. In the present manuscript we have evaluated two theories of the glass transition that are based on ideas related to elasticity of the amorphous glass-forming material. We find that the models from both J. Dyre and his group and of K.S. Schweizer and his group not only show non-diverging behavior but are also in some agreement with the new data, though still showing somewhat slower dynamics than those observed in the experiments. The work shows that the data are good enough to distinguish between theories and it is suggested that other mechanisms may be needed to fully describe the non-diverging responses of the ultra-stable glasses.

36 MATERIALS SCIENCE↗

Deep glassy state dynamic data challenge glass models: Configurational entropy models

This work was the result of the student's (Dongjie Chen) qualifying exam response. In it the experimental observation from our labs that the relaxation times of ultrastable glasses (a 20 million year old amber and a vapor deposited amorphous teflon) do not follow the expected Vogel-Fulcher or WLF types of divergence as the temperatures fall below the glass transition temperature. In the work we evaluated several theories by considering them in different ways. We used them as generally used and show that they do not capture the non-diverging behavior. Because the models were all entropy-based models, we also considered the possibility that the temperature dependence of the entropy used in the models is incorrect and chose two ways of estimating the entropy that do not follow the classical theoretical models. First we used the actually measured calorimetric response for the two ultrastable glasses, and we used the Milchev model, which does not go to zero above 0 Kelvin. Both of these approaches led to improved agreement between the theories and the experimental data. Finally, we also asked what the temperature dependence of the entropy would have to be so that the models agreed with the observed data. In some cases the entropy so-calculated was reasonable, while in others it was unphysical. In sum, the important point of the work is that the observation of non-diverging time-scales that suggest that there is no ideal glass transition can be reasonably captured by current theories if they take more realistic models of the entropy than is usually the case.

36 MATERIALS SCIENCE↗

Liquid chromatography at critical conditions (LCCC): Capabilities and limitations for polymer analysis

This paper investigates liquid chromatography at critical condition (LCCC) for polymer analysis. Based on controversial claims on the separation of cyclic polymers from linear analogues in the literature, the efficiency of LCCC for separation and purity analysis is questioned. Polyisobutylene (PIB) and poly(3,6-dioxa-1,8-octanedithiols) (polyDODT) were used for the study. Here, the structure of low molecular weight cyclic and linear polyDODT was demonstrated by MALDI-ToF. NMR did not show the presence of thiol end groups in higher molecular weight PIB-disulfide and polyDODT samples, so they were considered cyclic polymers. When a low molecular weight polyDODT oligomer with only traces of cycles, as demonstrated by MALDI-ToF, was mixed with an M n = 27K g/mol cyclic sample, LCCC did not detect the presence of linear oligomers at 6 wt%. Based on the data presented here, it can be concluded that the LCCC method is not capable of measuring < 6 wt% linear contamination so earlier claims for cyclic polystyrene (PS) samples purified by LCCC having < 3 % linear contaminants are questioned.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Nanoconfinement on Polymer Chain Dynamics

Here, we report on a study of the effects of nanoconfinement on polymer chain dynamics within the framework developed by Muthukumar [Muthukumar, M. (1991). Journal of Non-Crystalline Solids, 131, 654-666.], who suggests that there is an entropically controlled dynamical regime between the Rouse and the reptation regimes that affects the power law dependence on molecular weight of the transport properties.

36 MATERIALS SCIENCE↗

Collaborative Research: Polymer Macrocycles: A novel topology to control dynamics of rubbery materials

Understanding the dynamics of polymers of different topologies is an important field of study and one of the most important unanswered questions in this field is "how do circular polymers move," particularly in the melt state. New information suggests that molecular topology, specifically circular rings, impacts the response of materials in nanometer- scale confinement. The work performed here tackles these subjects through a collaboration in which specialists in polymer synthesis, polymer rheology and scattering methods, and in the physics of nanoconfinement work together to investigate the thermophysical behavior of circular macromolecules. The project goals are to use a novel synthesis method of "green" oxidative polymerization to produce high purity macrocycles and to investigate their linear viscoelastic behavior in order to fully characterize the dynamics of circular macromolecules to sizes that correspond to linear molecule entanglement densities higher than previously obtainable with synthetic polymers. Chemical chain end characterization and critical edge fractionation coupled with direct visualization of the prepared polymers through the use of polymer amplification methods are proposed in order to quantify the numbers of circular and linear molecules in each sample. The study of the linear viscoelastic response of blends of linear and circular molecules is also to be undertaken in the project. Nonlinear viscoelastic measurements, including extensional viscosity, are to be made. Strong differences in behavior between linear chains and circular ones also provides an important opportunity for new technology to break the "magic triangle" for tires: it is believed that improving one of the three key attributes - traction, wear, rolling resistance - necessarily sacrifices at least one of the others. Rubber made from cyclic polymers has the potential to break out of this triangle by reducing the so-called Payne effect in reinforced rubbers because circular macromolecules are less sensitive to nanoconfinement than their linear counterparts. The work has as one objective to characterize the impact of nanoconfinement on the behavior of large circular macromolecules. In addition, the dynamics of carbon black filled circular macromolecules are to be studied to test the hypothesis that the resulting rubbery materials will exhibit a reduced Payne effect.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Molecular mobility in glassy dispersions

Dielectric spectroscopy was used to characterize the structural relaxation in pharmaceutical dispersions containing nifedipine (NIF) and either poly(vinyl) pyrrolidone (PVP) or hydroxypropyl methylcellulose acetate succinate (HPMCAS). The shape of the dielectric response (permittivity versus log time) curve was observed to be independent of temperature. Thus, for the pure NIF as well as the dispersions, the validity of the time-temperature superposition principle was established. Furthermore, though the shape of the full dielectric response varied with polymer concentration, the regime related to the α- or structural relaxation was found to superimpose for the dispersions, though not with the response of the NIF itself. Hence, there is a limited time-temperature-concentration superposition for these systems as well. Therefore, in this polymer concentration range, calculation of long relaxation times in these glass-forming systems becomes possible. We found that strong drug-polymer hydrogen bonding interactions improved the physical stability (i.e., delayed crystallization) by reducing the molecular mobility. The strength of hydrogen bonding, structural relaxation time, and crystallization followed the order: NIF$-$PV P>NIF$-$HPMCAS>NIF. With an increase in polymer concentration, the relaxation times were longer indicating a decrease in molecular mobility. The temperature dependence of relaxation time, in other words fragility, was independent of polymer concentration. This is the first application of the superposition principle to characterize structural relaxation in glassy pharmaceutical dispersions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The linear rheological responses of wedge‐type polymers

ABSTRACT The linear rheological responses of a series of specially designed wedge‐type polymers synthesized by the polymerization of large molecular weight monomers have been measured. These wedge polymers contained large side groups which contained three flexible branch chains per polymer chain unit. The master curves for these polymers were obtained by time temperature superposition of dynamic data at different temperatures from the terminal flow regime to well below the glass transition temperature, T g . While these polymers maintained a behavior similar to that of linear polymers, the influence of the large side group structure lead to low entanglement densities and extremely low rubbery plateau modulus values, being near to 13 kPa. The viscosity molecular weight dependence was also somewhat higher than that normally observed for linear polymers, tending toward a power law near to 4.2 rather than the typical 3.4 found in entangled linear chains. The glassy modulus of these branched polymers is also found to be extremely low, being less than 100 MPa at T g −60 °C. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53 , 899–906

Hu, Miao↗