Engineering topics

McLean, William

Publications and source records attributed to McLean, William.

7 records

DOE OSTI2022

Hydrogen Uptake Kinetics of 1,4-Bis(phenylethynyl)benzene Rubberized O-Rings: Measurements, Modeling, and Comparison with Additional Forms of Organic Getters

A class of molecules called “hydrogen getters” can react with, or scavenge, H 2 in applications where the hydrogen presence and/or buildup are not desirable. One such “getter”, 1,4-bis(phenylethynyl)benzene or DEB, can be incorporated into a silicone matrix in the form of an O-ring for added flexibility, environmental resiliency, and convenient use as a gasket in sealed applications. However, the performance and kinetics of this DEB-loaded rubberized O-ring have not yet been characterized. Here in this work, the hydrogen uptake kinetics of the rubberized DEB O-ring were extracted by the isoconversional analysis from isothermal isobaric data under conditions of 13,332 Pa H 2 and 305–325 K. The isoconversional and cylindrical diffusion approximations were then used to predict and model the hydrogen uptake of rubberized DEB O-rings under any arbitrary condition, as illustrated in this work for the simple case of a constant rate of hydrogen generation/input. In comparison with other Pd/carbon-based/organic getter systems, these rubberized DEB O-rings provide a type of hydrogen getter material with enhanced flexibility and catalyst protection in applications where an O-ring seal is needed.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Uranium hydride corrosion. II Modeling spatially random growth using reaction and nucleation kinetics

A uranium hydride (UH 3 ) corrosion kinetics model has been developed, based on dimensionally restricted nucleation kinetics, which combines heretofore separate reaction and nucleation kinetics models into a single predictive construct. This theoretical framework accounts for the superficial and random pitting behaviour of UH 3 corrosion. The model can be used to generate the net corrosion surface area and volume fractions for a uranium specimen, generally accounting for its geometric form factor through the surface-to-volume ratio. Furthermore, the combined corrosion kinetics model enables the generation of quantities which may be directly compared to those obtained by non-destructive, non-contact evaluation methods.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Uranium hydride corrosion. I New insights into the Condon-Kirkpatrick model of uranium hydride formation rate

An analytic solution to the uranium hydride formation rate equation of Condon and Kirkpatrick (CK) has been developed, which is directly solved via algebraic operations and requires only gaseous hydrogen (H 2 ) pressure and temperature as inputs. The solution does not depend on the specific functional forms of the hydriding and dehydriding rate constants, nor of key physical parameters. Furthermore, a modified form of the CK model has also been developed, where replacement of the hydrogen solubility function results in an improved fit to published experimental data as H 2 pressure decreases toward the corrosion threshold value.

36 MATERIALS SCIENCE↗

DOE OSTI2020

General H2O Outgassing Model Applicable to Silica-Filled Silicones

Moisture-induced agining and degradation are continuing concerns in long-term storage and use of silicone materials. The silica fillers frequently used to provide mechanical reinforcement in silicone formulations have a high affinity for H2O and act as a source of moisture outgassing later when placed in dry or vacuum applications.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Phase Change-Driven Negative Activation Energies in Pd/Carbon-Based/Organic Getter Hydrogenation Reactions

In this study, the hydrogenation of 1,4-diphenylbutadiyne (DPB) blended with carbon-supported Pd (DPB–Pd/C) in the form of pellets was investigated by isothermal–isobaric experiments at 1333 Pa of H 2 and in the temperature range of 291–315 K. The extracted kinetics were then used in conjunction with a complementary constant rate of H 2 input experimentation to model the performance of a DPB-catalysis/support system as a function of temperature and H 2 partial pressure. First-principles density functional theory (DFT) calculations were also performed to shed light on the molecular level energetics of DPB and its intermediate states. A seemingly puzzling formation of alternate positive activation energy barrier (higher reaction rate with higher temperature) and negative activation energy barrier (higher reaction rate with lower temperature) zones during the hydrogenation process was discovered. However, this observed phenomenon can be logically explained in terms of the associated phase changes and H 2 transport in the material. This work provides a good illustration of a rarely encountered chemical process with a negative activation energy barrier.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2019

Hydrogen Uptake Kinetics of 1,4-Bis(phenylethynyl)benzene (DEB) Rubberized Coating on Silicone Foam Substrate

The hydrogen uptake kinetics of 1,4-bis(phenylethynyl)benzene, or DEB, mixed with palladium (Pd) on activated carbon in a rubber matrix coating on top of a porous silicone foam substrate are investigated. First, isothermal isobaric hydrogenation experiments were performed under different temperatures and H 2 pressures to extract the uptake kinetics. The H 2 uptake models based on the measured kinetic parameters were then employed to investigate/simulate the performance of the getter under dynamic application environments. The actual hydrogenation characteristics in this type of getter is multifaceted and involve actual H 2 concentration in the getter matrix, micrometer scale diffusion of atomic hydrogen away from Pd sites, precipitation of hydrogenated DEB crystals at the coating surfaces, and mobility of fresh DEB molecules. The kinetic analysis/modeling methodology described in this report can serve as a template for other gas-solid reactions as well. Aside from possessing a good hydrogen capacity and excellent performance, this type of rubberized getter also offers some unique advantages over traditional solid getter: flexible structure and protection of Pd catalyst from exposure to the environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2019

Moisture Corrosion of LiH: A Kinetic Investigation by DRIFT Spectroscopy

Lithium hydride (LiH) is a unique, ionic compound with applications in a variety of industries. Unfortunately, LiH is very reactive toward H 2 O even at ppm levels, forming oxide (Li 2 O) and hydroxide (LiOH) corrosion layers while outgassing H 2 . An effective means to eliminate unwanted outgassing is vacuum-heating to convert LiOH into Li 2 O, although subsequent re-exposure to moisture during transport/handling reconverts some Li 2 O back to LiOH. A corrosion growth model for previously vacuum-baked LiH is necessary for long-term prediction of the hydrolysis of LiH. In this work, a para-linear hydroxide corrosion growth model is proposed for the reaction of previously vacuum-baked LiH samples with moisture. This model, composed of two competing diffusion reaction fronts at the LiOH/Li 2 O and Li 2 O/LiH interfaces, is validated experimentally by subjecting a previously vacuum-baked polycrystalline LiH sample to 35 ppm of H 2 O at room temperature while monitoring the corrosion growth as a function of time with diffuse-reflectance infrared Fourier transform (DRIFT) spectroscopy. The para-linear growth model for the hydrolysis of previously vacuum-baked LiH proposed in this report can also serve as a template for the hydrolysis of other hygroscopic oxides grown on metal or metal hydride substrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗