Engineering topics

Mccay, Mary H.

Publications and source records attributed to Mccay, Mary H..

4 records

NASA NTRS1993

Measured and predicted effects of gravity level on directional dendritic solidification of NH4Cl-H2O

Dendritic growth front rates during vertical directional solidification are predicted for gravity levels of 10 exp 0 g sub e (where e is earth gravity), 10 exp -1 g sub e, 10 exp -2 g sub e, 10 exp -3 g sub e, 10 exp -4 g sub e, and 10 exp -5 g sub e (microgravity) for the physical conditions used for a recent ammonium chloride-water solidification experiment on the International Microgravity Laboratory I (IMLI). The growth front rates at 10 exp 0 g sub e and 10 exp -5 g sub e are validated using ground based laboratory and IMLI experimental data. As the gravity decreases, the growth rates increase until they approach a maximum at approximately 10 exp -4 g sub e. The 10 exp -4 and 10 exp -5 levels are equivalent. Liquid concentration and volume fraction, temperature profiles and fluid flow velocities are also calculated. Kinetic energy calculations for each of the six gravity levels indicate that the threshold for fluid flow to affect the growth front rate is in the range of 10 exp -8 ergs.

Mccay, T. D.↗

NASA NTRS1992

An optical study of grain formation: Casting and solidification technology (2-IML-1)

By studying the unidirectional growth of a metal-model material in microgravity, an attempt is made to characterize alloy solidification. Using holograms and supporting temperature measurements obtained during processing in the Fluids Experiment System (FES), the solute and thermal fields associated with the dendrite growth front and extraneous nucleation will be measured and compared to a theoretical (computational) model. Ground based supporting experiments include particle tracking to measure the velocity fields, and optical phase shift techniques (confocal optical signal processing, interferometry, and Schlieren) to study thermal and solutal fields.

Mccay, Mary H.↗

NASA NTRS1991

Thermal and solutal conditions at the tips of a directional dendritic growth front

The line-of-sight averaged, time-dependent dendrite tip concentrations for the diffusion dominated vertical directional solidification of a metal model (ammonium chloride and water) were obtained by extrapolating exponentially fit diffusion layer profiles measured using a laser interferometer. The tip concentrations were shown to increase linearly with time throughout the diffusion dominated growth process for an initially stagnant dendritic array. The process was terminated for the cases chosen by convective breakdown suffered when the conditionally stable diffusion layer exceeded the critical Rayleigh criteria. The transient tip concentrations were determined to significantly exceed the values predicted for steady state, thus producing much larger constitutional undercoolings. This has ramifications for growth speeds, arm spacings and the dendritic structure itself.

Mccay, T. D.↗

NASA NTRS1991

Interferometric measurements of a dendritic growth front solutal diffusion layer

An experimental study was undertaken to measure solutal distributions in the diffusion layer produced during the vertical directional solidification (VDS) of an ammonium chloride - water (NH4Cl-H2O) solution. Interferometry was used to obtain concentration measurements in the 1-2 millimeter region defining the diffusion layer. These measurements were fitted to an exponential form to extract the characteristic diffusion parameter for various times after the start of solidification. The diffusion parameters are within the limits predicted by steady state theory and suggest that the effective solutal diffusivity is increasing as solidification progresses.

Hopkins, John A.↗