Search NASASearch

Engineering topics

Mcginnis, F. K.

Publications and source records attributed to Mcginnis, F. K..

Measurements of spectral and total emittance of reinforced carbon-carbon

Elevated temperature measurements of the spectral emittance of reinforced carbon-carbon (RCC) as the thermal protection material for the leading edge areas of the Space Shuttle Orbiter were carried out in situ, with environments provided by arc-heated streams of air and argon. A monochromator, infrared pyrometers, and thermocouples were used in evaluating the response of the RCC test specimens during the emittance measurements. Results indicate that the material is nongray, with lowest spectral emittance at the short wavelengths and with relatively high total emittance. The trend of the total emittance data suggests a slight decrease in total emittance with increasing temperature, although the emittance value stabilizes with continuing exposure.

Grinberg, I. M.

Shuttle active thermal control system development testing. Volume 6: Water ejector plume tests

Results are given of vacuum testing of nozzles designed to eject water vapor away from the space shuttle to prevent contamination of the spacecraft surfaces and payload. The water vapor is generated by an active cooling system which evaporates excess fuel cell water to supplement a modular radiator system (MRS). The complete heat rejection system including the MRS, flash evaporator or sublimator and nozzle were first tested to demonstrate the system operational characteristics. The plume tests were performed in two phases and the objectives of this test series were: (1) to determine the effectiveness of a supersonic nozzle and a plugged nozzle in minimizing impingement upon the spacecraft of water vapor exhausted by an active device (flash evaporator or sublimator); and (2) to obtain basic data on the flow fields of exhaust plumes generated by these active devices, both with and without nozzles installed.

Mcginnis, F. K.