Search NASA⌕ Search

Engineering topics

Mcilwain, M. C.

Publications and source records attributed to Mcilwain, M. C..

6 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

US/CIS integrated NTRE

The paper describes the Nuclear Thermal Energy (NTRE) engine, developed by taking advantage of mature fuel technology developed in the former Soviet Union, thus shortening the development schedule of this engine for moon and Mars explorations. The near-term NTRE engine has a number of features that provide safety, mission performance, cost, and risk benefits. These include: (1) high-temperature long-life CIS fuel, (2) high-pressure recuperated expander cycle, (3) assured restart, (4) long-life cooled nozzle with thin inner wall, (5) long-life turbopumps, (6) heat radiation and electrical power generation, and (7) component integration synergy. Diagrams of the reactor core, the recuperated bottoming cycle flow schematic, and the recuperated bottoming cycle engine schematic are presented.

Bulman, M. J.↗
NASA NTRS1983

Space Shuttle Main Engine /SSME/ - The 'maturing' process

The basic Space Shuttle Main Engine (SSME) concept called for an operational life of 55 missions, as well as an exceptionally high specific impulse. While these requirements are considered achievable in the cases of the basic engine structure, powerhead, main combustion chamber, propellant ducts, hydraulic lines and engine controller, other components may experience excessive wear and deterioration and may not achieve specification life without removal and overhaul. Most SSME components have been designed as line replaceable units, which have demonstrated good operational durability and will meet flight certification requirement upgrading. The Flight Confidence Program of the SSME test program currently being instituted will recertify existing engines for use in more than the 10 flights stipulated until now. The testing of two engines in repeated cycles should add 10 flights for every two successfully completed certification cycles.

Dankhoff, W.↗
NASA NTRS1981

Considerations on repeated repairing of weldments in Inconel 718 alloy

The effects of repeated weld repairs on the metallurgical characteristics, high cycle fatigue (HCF), and tensile properties of Inconel 718 butt weld joints were determined. A 1/4 in thick plate and a 1/2 in thick plate were used as well as tungsten inert gas welding, and Inconel 718 filler wire. Weld panels were subjected to 2, 6, and 12 repeated repairs and were made in a highly restrained condition. Post weld heat treatments were also conducted with the welded panel in the highly restrained condition. Results indicate that no significant metallurgical anomaly is evident as a result of up to twelve repeated weld repairs. No degradation in fatigue life is noted for up to twelve repeated repairs. Tensile results from specimens which contained up to twelve repeated weld repairs revealed no significant degradation in UTS and YS. However, a significant decrease in elongation is evident with specimens (solution treated and age hardened after welding) which contained twelve repeated repairs. The elongation loss is attributed to the presence of a severe notch on each side (fusion line) of the repair weld bead reinforcement.

Bayless, E. O.↗
NASA NTRS1981

Weld geometry strength effect in 2219-T87 aluminum

A theory of the effect of geometry on the mechanical properties of a butt weld joint is worked out based upon the soft interlayer weld model. Tensile tests of 45 TIG butt welds and 6 EB beads-on-plate in 1/4-in. 2219-T87 aluminum plate made under a wide range of heat sink and power input conditions are analyzed using this theory. The analysis indicates that purely geometrical effects dominate in determining variations in weld joint strength with heat sink and power input. Variations in weld dimensions with cooling rate are significant as well as with power input. Weld size is suggested as a better indicator of the condition of a weld joint than energy input.

Nunes, A. C., Jr.↗
NASA NTRS1973

Eddy-current measurements of thickness of high-temperature coatings

The eddy-current technique was applied to measuring the thickness of a fused silicide coating on a refractory alloy slab. Phase and magnitude of the test signal were measured at four places in 13 different samples, and thickness of coating was computed on the basis of each of these quantities. These results were then compared with those obtained by conventional metallographic methods. Phase-based measurements were most reliable, and the maximum error between the metallographically determined thickness and the thickness as determined by the least squares fit to the phase measurements was less than 0.01 mm (about 1%). Photomicrography of a typical sample shows that a large source of error resides in the fact that two regions - an outer rough region and an inner uniform region - of the coating layer exist rather than the single region upon which the calculations were based.

Dodd, C. V.↗