Engineering topics
Publications and source records attributed to Mckeeman, John C..
JPL/VIEW is menu-driven program retrieving and displaying incoming propagation data as they reach hard disk of data-acquisition-and-storage system. Real-time display enables operator to monitor progress of events and respond swiftly to errors during experiment or trial operation. Written in Microsoft C.
Electronic system acquires, controls processing of, and displays data from experiments on propagation of phase-coherent radio signals at frequencies of 12, 20, and 30 GHz. Acquisition equipment coordinates flow of data from multiple input channels to computer. Software provides for multi-tasking and for interactive graphical displays, including easy-to-use windows and pulldown menus with mouse input. Offers outstanding accuracy; acquires and displays data and controls associated equipment, all in real time.
Virginia Tech has developed two types of receivers to monitor the Olympus beacons, as well as a custom data acquisition system to store and display propagation data. Each of the receiver designs uses new hybrid analog/digital techniques. The data acquisition system uses a stand alone processor to collect and format the data for display and subsequent processing. The launch of the Olympus satellite with its coherent beacons offers new opportunities to study propagation effects at 12.5, 20, and 30 GHz. At Virginia Tech, the satellite is at 14 degrees in elevation, which allows us to measure low elevation angle effects. However, to make these measurements, a very accurate and stable measurement system is required. Virginia Tech has constructed a complex receiving system which monitors the Olympus beacons and all parameters associated with propagation research. In the current configuration, researchers have developed a receiver which frequency locks to the less fade susceptible 12.5 GHz beacon. Since all beacons on the satellite are driven from a single master oscillator, drift in the 12.5 GHz beacon implies corresponding drifts in the 20, and 30 GHz beacons. The receivers for the 20 and 30 GHz systems derive their frequency locking information from the 12.5 GHz system. This widens the dynamic range of the receivers and allows the receivers to maintain lock in severe fade conditions. In addition to monitoring the beacons, the sky noise is monitored with radiometers at each frequency. The radiometer output is used to set the clear air level for each beacon measurement. Researchers also measure the rain rate with several tipping bucket rain gauges placed along the propagation path.