Search NASA⌕ Search

Engineering topics

Meelan Choudhari

Publications and source records attributed to Meelan Choudhari.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Influence of Stationary Crossflow Modulation on Secondary Instability

A likely scenario for swept wing transition on subsonic aircraft with natural laminar flow involves the breakdown of stationary crossflow vortices via high frequency secondary instability. A majority of the prior research on this secondary instability has focused on crossflow vortices with a single dominant spanwise wavelength. This paper investigates the effects of the spanwise modulation of stationary crossflow vortices at a specified wavelength by a subharmonic stationary mode. Secondary instability of the modulated crossflow pattern is studied using planar, partial-differential-equation based eigenvalue analysis. Computations reveal that weak modulation by the first subharmonic of the input stationary mode leads to mode splitting that is particularly obvious for Y-type secondary modes that are driven by the wall-normal shear of the basic state. Thus, for each Y mode corresponding to the fundamental wavelength of results in unmodulated train of crossflow vortices, the modulated flow supports a pair of secondary modes with somewhat different amplification rates. The mode splitting phenomenon suggests that a more complex stationary modulation such as that induced by natural surface roughness would yield a considerably richer spectrum of secondary instability modes. Even modest levels of subharmonic modulation are shown to have a strong effect on the overall amplification of secondary disturbances, particularly the Z-modes driven by the spanwise shear of the basic state. Preliminary computations related to the nonlinear breakdown of these secondary disturbances provide interesting insights into the process of crossflow transition in the presence of the first subharmonic of the dominant stationary vortex.

Vortex structure↗
NASA NTRS2016

Nonlinear Wakes Behind a Row of Elongated Roughness Elements

This paper is concerned with the high Reynolds number flow over a spanwise periodic array of roughness elements with inter-element spacing of the order of the local boundary-layer thickness. While earlier work by Goldstein, Sescu, Duck and Choudhari (2010) and Goldstein, Sescu, Duck and Choudhari (2011) was mainly concerned with smaller roughness heights that produced relatively weak distortions of the downstream flow, the focus here is on extending the analysis to larger roughness heights and streamwise elongated planform shapes that together produce a qualitatively different, nonlinear behavior of the downstream wakes. The roughness scale flow now has a novel triple-deck structure that is somewhat different from related studies that have previously appeared in the literature. The resulting flow is formally nonlinear in the intermediate wake region, where the streamwise distance is large compared to the roughness dimensions but small compared to the downstream distance from the leading edge, as well as in the far wake region where the streamwise length scale is of the order of the downstream distance from the leading edge. In contrast, the flow perturbations in both of these wake regions were strictly linear in the earlier work by Goldstein et al (2010, 2011). This is an important difference because the nonlinear wake flow in the present case provides an appropriate basic state for studying the secondary instability and eventual breakdown into turbulence.

Boundary layer control↗
NASA NTRSDate not supplied

TPSAS-NF1676L-13025-DND

SWIFT Flight Experiments: receptivity to surface roughness can have large impact on transition location.

Meelan Choudhari↗
NASA NTRSDate not supplied

TPSAS-NF1676L-13027-DND

Outline - Motivation - Transition control using discrete roughness elements (DRE) - Subsonic Aircraft Roughness Glove Experiment (SARGE) - Crossflow transition in the absence of control - Effect of control - Concluding Remarks

Mujeeb Malik↗
NASA NTRSDate not supplied

TPSAS-NF1676L-19387-DND

Explore the source record for details and available documents.

Meelan Choudhari↗
NASA NTRSDate not supplied

Transition Experiment

Explore the source record for details and available documents.

Jenna Eppink↗
NASA NTRSDate not supplied

Boundary-Layer Transition Prediction Through Loose Coupling of OVERFLOW and LASTRAC

Transition prediction based on linear stability theory is expected to more accurately reflect the causality of transition onset than phenomenological transition models based on RANS-like transport equations. To help achieve the CFD vision 2030 aim of building a CFD tool chain with automated prediction of boundary layer transition, a technique to loosely tie the NASA OVERFLOW CFD solver with the LASTRAC stability analysis tool is described. The coupled solver is then used to compute transition over selected over a flat plate in a freestream with sufficiently low levels of turbulence, NLF(1)-0416 airfoil, the 6:1 prolate spheroid at an angle of attack, and a NASA juncture flow model with symmetric wing configuration. The findings show that the loosely coupled approach can reliably predict the transition location accurately in scenarios that are dominated by a single transition mechanism involving Tollmien-Schlichting instabilities, crossflow instabilities, or separation bubble-induced transition, or include a mixture of selected mechanisms. The toolset presents here appears to be robust to the prescription of the initial transition location, and it can lead to a converged solution in four or five rounds of the mean flow calculation and stability analysis, with minimal input from the user.

boundary layer transition↗
NASA NTRSDate not supplied

Effect of the Reynolds Number on the Freestream Disturbance Environment in a Mach 6 Nozzle

To understand the impact of unit Reynolds number on the acoustic disturbance field inside a high-speed wind tunnel, we use Direct Numerical Simulations (DNS) to model the turbulent boundary layers along the walls of a quasi-two-dimensional nozzle configuration. Intended as a stepping stone to fully three-dimensional simulations of freestream noise inside the NASA 20-Inch Mach 6 Wind Tunnel, the present simulations are based on periodic boundary conditions across the spanwise width of the computational domain that corresponds to about one third of the actual tunnel width. These simulations are performed at four different unit Reynolds numbers, ranging from 3.56e6 to 14.0e6 per meter. The predominantly hydrodynamic fluctuations inside the boundary layer are shown to be nearly unaffected by the presence of freestream forcing associated with the impinging acoustic radiation from the opposite wall. Thus, the Reynolds number trends associated with boundary-layer quantities are consistent with previously published DNS of flat-plate boundary layers at similar Mach numbers and wall temperature ratios. The unsteady disturbance environment within the nozzle core region is found to be approximately spatially homogeneous and purely acoustic in nature. The numerical results are used to make comparisons with tunnel noise measurements by Chou et al. [1,2]. Unlike previous comparisons involving static-pressure fluctuations based on the DNS and pitot-pressure fluctuations measured in the wind tunnel, direct comparisons involving the fluctuations in the same physical quantity, namely, the streamwise mass flux, have been reported for the first time. The predicted decrease in the root-mean-square fluctuations in pressure and mass flux with an increasing unit Reynolds number is in agreement with the measurements in the NASA 20-Inch Mach 6 Wind Tunnel. Additional details of the acoustic radiation field are quantified and should be useful toward a digital synthesis of the tunnel disturbance environment that would enable realistic simulations of the natural transition process.

Turbulence↗
NASA NTRSDate not supplied

Implementation of Two Local Correlation-Based Transition Models in OVERFLOW 2.3e

Accurate prediction of the laminar-to-turbulent boundary layer transition is highlighted as a vital component of NASA's CFD Vision 2030 Study. With an increased emphasis on greener air transports and sustainable aviation, transition modeling is anticipated to have an added significance, particularly in the applications related to laminar flow technology. However, unmanned aerial vehicles, crewed reentry vehicles, and ground-to-flight extrapolation all benefit from transition models. It is useful to incorporate a variety of models in CFD solvers because there isn't a single transition model that is ideal for the complete spectrum of applications. While the Langtry-Menter γ–Reθt model has been widely used for CFD predictions of flows with laminar, transitional, and turbulent boundary layers, it does not meet the criteria for Galilean invariance, a desirable attribute for rotorcraft applications. To help overcome that limitation, we have implemented Menter's SST-based γ transition model within NASA’s OVERFLOW Overset CFD code (version 2.3e). In addition, an SA-based implementation of the Langtry-Menter γ–Reθt transition model has also been implemented in view of the increased robustness of the SA-turbulence model for external aerodynamic applications. An initial assessment of the implemented models has been carried out using benchmark 2D test cases involving flat plates and the NLF-0416 airfoil, focusing on bypass, Tollmien-Schlichting, and laminar separation bubble-induced transition scenarios. In comparison to the Langtry-Menter γ–Reθt model, both models were found to produce increased computation efficiency, principally as a result of the decrease from four to three auxiliary transport equations. Results from the initial analysis will be presented, along with additional details pertaining to the deployment of these models.

CFD modeling↗
NASA NTRSDate not supplied

Implementation and Verification of the SST-𝜸 and SA-AFT Transition Models in FUN3D

The transition modeling capability in the NASA unstructured FUN3D suite of codes has been augmented by incorporating two additional transport-equation-based transition models, namely, the 𝜸 transition model coupled with Menter’s 2003 Shear-Stress Transport (SST) turbulence model and Coder’s Amplification Factor Transport (AFT) transition model combined with the Spalart-Allmaras (SA) turbulence model. Both of these models, SST-𝜸 and SA-AFT, are used to compute transition characteristics of several test cases from the literature. The selected test cases cover a range of transition scenarios including bypass transition over a flat plate (ERCOFTAC T3A and T3A- flow configurations), transition in the presence of separation bubbles (NLF-0416 airfoil at selected angles of attack), and natural transition due to Tollmien-Schlichting instabilities (flat-plate experiment by Schubauer and Klebanoff). To address the urgent need for model verification as highlighted in recent workshops on transition modeling, the drag, lift, surface pressure, and skin-friction coefficients from the FUN3D solutions for a sequence of meshes are compared with the results obtained with the same models implemented in the NASA structured grid flow solver OVERFLOW. Comparisons between the local and global surface coefficients from the FUN3D and OVERFLOW solvers for all test cases resulted in good agreement for the finest meshes.

Verification↗