Search NASA⌕ Search

Engineering topics

Meidanshahi, Reza Vatan

Publications and source records attributed to Meidanshahi, Reza Vatan.

Hydrogen-induced degradation dynamics in silicon heterojunction solar cells via machine learning

Abstract Among silicon-based solar cells, heterojunction cells hold the world efficiency record. However, their market acceptance is hindered by an initial 0.5% per year degradation of their open circuit voltage which doubles the overall cell degradation rate. Here, we study the performance degradation of crystalline-Si/amorphous-Si:H heterojunction stacks. First, we experimentally measure the interface defect density over a year, the primary driver of the degradation. Second, we develop SolDeg, a multiscale, hierarchical simulator to analyze this degradation by combining Machine Learning, Molecular Dynamics, Density Functional Theory, and Nudged Elastic Band methods with analytical modeling. We discover that the chemical potential for mobile hydrogen develops a gradient, forcing the hydrogen to drift from the interface, leaving behind recombination-active defects. We find quantitative correspondence between the calculated and experimentally determined defect generation dynamics. Finally, we propose a reversed Si-density gradient architecture for the amorphous-Si:H layer that promises to reduce the initial open circuit voltage degradation from 0.5% per year to 0.1% per year.

14 SOLAR ENERGY↗

Gaussian approximation potential for amorphous Si : H

Hydrogenation of amorphous silicon (a–Si : H) is critical for reducing defect densities, passivating midgap states and surfaces, and improving photoconductivity in silicon-based electro-optical devices. Modeling the atomic-scale structure of this material is critical to understanding these processes, which in turn is needed to describe c–Si/a–Si : H heterojunctions that are at the heart of modern solar cells with world-record efficiency. Density functional theory (DFT) studies achieve the required high accuracy but are limited to moderate system sizes of 100 atoms or so by their high computational cost. Simulations of amorphous materials have been hindered by this high cost because large structural models are required to capture the medium-range order that is characteristic of such materials. Empirical potential models are much faster, but their accuracy is not sufficient to correctly describe the frustrated local structure. Data-driven, machine-learned interatomic potentials have broken this impasse and have been highly successful in describing a variety of amorphous materials in their elemental phase. Here, we extend the Gaussian approximation potential (GAP) for silicon by incorporating the interaction with hydrogen, thereby significantly improving the degree of realism with which amorphous silicon can be modeled. We show that our Si : H GAP enables the simulation of hydrogenated silicon with an accuracy very close to DFT but with computational expense and run times reduced by several orders of magnitude for large structures. Here, we demonstrate the capabilities of the Si : H GAP by creating models of hydrogenated liquid and amorphous silicon and showing that their energies, forces, and stresses are in excellent agreement with DFT results, and their structure as captured by bond and angle distributions are in agreement with both DFT and experiments.

36 MATERIALS SCIENCE↗

From Femtoseconds to Gigaseconds: The SolDeg Platform for the Performance Degradation Analysis of Silicon Heterojunction Solar Cells

Heterojunction Si solar cells exhibit notable performance degradation. Here, we modeled this degradation by electronic defects getting generated by thermal activation across energy barriers over time. To analyze the physics of this degradation, we developed the SolDeg platform to simulate the dynamics of electronic defect generation. First, femtosecond molecular dynamics simulations were performed to create a-Si/c-Si stacks, using the machine learning-based Gaussian approximation potential. Second, we created shocked clusters by a cluster blaster method. Third, the shocked clusters were analyzed to identify which of them supported electronic defects. Fourth, the distribution of energy barriers that control the generation of these electronic defects was determined. Fifth, an accelerated Monte Carlo method was developed to simulate the thermally activated time-dependent defect generation across the barriers. Our main conclusions are as follows. (1) The degradation of a-Si/c-Si heterojunction solar cells via defect generation is controlled by a broad distribution of energy barriers. (2) We developed the SolDeg platform to track the microscopic dynamics of defect generation across this wide barrier distribution and determined the time-dependent defect density N(t) from femtoseconds to gigaseconds, over 24 orders of magnitude in time. (3) We have shown that a stretched exponential analytical form can successfully describe the defect generation N(t) over at least 10 orders of magnitude in time. (4) We found that in relative terms, Voc degrades at a rate of 0.2%/year over the first year, slowing with advancing time. (5) We developed the time correspondence curve to calibrate and validate the accelerated testing of solar cells. We found a compellingly simple scaling relationship between accelerated and normal times t normal ∝ t accel T(accel)/T(normal) . (6) We also carried out experimental studies of defect generation in a-Si:H/c-Si stacks. We found a relatively high degradation rate at early times that slowed considerably at longer time scales.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The impact of interfacial Si contamination on GaN-on-GaN regrowth for high power vertical devices

The development of gallium nitride (GaN) power devices requires a reliable selective-area doping process, which is difficult to achieve because of ongoing challenges associated with the required etch-then-regrow process. The presence of silicon (Si) impurities of unclear physical origin at the GaN regrowth interface has proven to be a major bottleneck. Furthermore, this paper investigates the origin of Si contamination at the epitaxial GaN-on-GaN interface and demonstrates an approach that markedly reduces its impact on device performance. An optimized dry-etching approach combined with UV-ozone and chemical etching is shown to greatly reduce the Si concentration levels at the regrowth interface, and a significant improvement in a reverse leakage current in vertical GaN-based p–n diodes is achieved.

36 MATERIALS SCIENCE↗

Electronic structure of GaP/Si (001) heterojunctions and the role of hydrogen passivation

Abstract Epitaxially grown single crystal GaP on Si is of considerable interest due to being nearly lattice matched to Si, making it attractive for III‐V/Si solar cells. GaP has been used as a buffer layer for III‐V/Si solar cells and also in selective contact Si solar cells. The performance and functionality of such devices are strongly influenced by the presence of localized states at the GaP/Si interface. Here, we examine the electronic structure of GaP/Si(001) heterojunctions and the effect of hydrogen (H) passivation at the interface, in contrast to interface mixing, through density functional theory calculations. Our calculations show that due to the heterovalent mismatch nature of the GaP/Si interface, there is a high density of localized states at the abrupt GaP/Si interface due to the excess charge associated with heterovalent bonding, as reported elsewhere. We find that the addition of H leads to additional bonding at the interface, which mitigates the charge imbalance, and greatly reduces the density of localized states, leading to a nearly ideal heterojunction. A similar result is found with a completely intermixed interface (alternating cation and anion bonding) in terms of low interface state density. However, when the intermixing occurs through single‐layer or double‐layer terraces, the benefits of intermixing are lost and the interface state density reverts more to the abrupt interface case.

Meidanshahi, Reza Vatan↗