Search NASA⌕ Search

Engineering topics

Meissinger, H. F.

Publications and source records attributed to Meissinger, H. F..

17 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

The role of robotics in space system operations

The role of automation and robotics in support of man's activities in space is discussed, with emphasis given to satellite servicing functions on board the NASA Space Station (SS) or at remote locations. Consideration is given to four satellite servicing mission scenarios, including: low-earth-orbit (LEO) servicing of satellite in situ or on the Space Station following orbital transfer by means of an Orbital Maneuvering Vehicle (OMV); in situ servicing of a free-flying coorbiting materials processing platform; repair/refurbishment of Space Station payloads of substations; an in situ servicing of geostationary satellites by means of an Orbital Transfer Vehicle (OTV). The potential applications of three different automation technologies are examined, including: teleoperation; robotics; and artificial intelligence. Consideration is also given to the potential applications of the Space Station data system in support of servicing activities. A list of the more common terms of automation technology is provided.

Meissinger, H. F.↗
NASA NTRS1984

Space station automation study-satellite servicing, volume 2

Technology requirements for automated satellite servicing operations aboard the NASA space station were studied. The three major tasks addressed: (1) servicing requirements (satellite and space station elements) and the role of automation; (2) assessment of automation technology; and (3) conceptual design of servicing facilities on the space station. It is found that many servicing functions cloud benefit from automation support; and the certain research and development activities on automation technologies for servicing should start as soon as possible. Also, some advanced automation developments for orbital servicing could be effectively applied to U.S. industrial ground based operations.

Meissinger, H. F.↗
NASA NTRS1982

Optimal sun-alignment techniques of large solar arrays in electric propulsion spacecraft

Optimum sun-alignment of large solar arrays in electric propulsion spacecraft operating in earth orbit requires periodic roll motions around the thrust axis, synchronized with the apparent conical motion of the sun line. This oscillation is sustained effectively with the aid of gravity gradient torques while only a small share of the total torque is being contributed by the attitude control system. Tuning the system for resonance requires an appropriate choice of moment-of-inertia characteristics. To minimize atmospheric drag at low orbital altitudes the solar array is oriented parallel, or nearly parallel, to the flight direction. This can increase the thrust-to-drag ratio by as much as an order of magnitude. Coupled with optimal roll orientation, this feathering technique will permit use of electric propulsion effectively at low altitudes in support of space shuttle or space station activities and in spiral ascent missions.

Meissinger, H. F.↗
NASA NTRS1981

Integrated propulsion for near-Earth space missions. Volume 1: Executive summary

Tradeoffs between electric propulsion system mass ratio and transfer time from LEO to GEO were conducted parametrically for various thruster efficiency, specific impulse, and other propulsion parameters. A computer model was developed for performing orbit transfer calculations which included the effects of aerodynamic drag, radiation degradation, and occultation. The tradeoff results showed that thruster technology areas for integrated propulsion should be directed towards improving primary thruster efficiency in the range from 1500 to 2500 seconds, and be continued towards reducing specific mass. Comparison of auxiliary propulsion systems showed large total propellant mass savings with integrated electric auxiliary propulsion. Stationkeeping is the most demanding on orbit propulsion requirement. At area densities above 0.5 sq m/kg, East-West stationkeeping requirements from solar pressure exceed North-South stationkeeping requirements from gravitational forces. A solar array pointing strategy was developed to minimize the effects of atmospheric drag at low altitude, enabling electric propulsion to initiate orbit transfer at Shuttle's maximum cargo carrying altitude. Gravity gradient torques are used during ascent to sustain the spacecraft roll motion required for optimum solar array illumination. A near optimum cover glass thickness of 6 mils was established for LEO to GEO transfer.

Dailey, C. L.↗
NASA NTRS1981

Integrated propulsion for near-Earth space missions. Volume 2: Technical

The calculation approach is described for parametric analysis of candidate electric propulsion systems employed in LEO to GEO missions. Occultation relations, atmospheric density effects, and natural radiation effects are presented. A solar cell cover glass tradeoff is performed to determine optimum glass thickness. Solar array and spacecraft pointing strategies are described for low altitude flight and for optimum array illumination during ascent. Mass ratio tradeoffs versus transfer time provide direction for thruster technology improvements. Integrated electric propulsion analysis is performed for orbit boosting, inclination change, attitude control, stationkeeping, repositioning, and disposal functions as well as power sharing with payload on orbit. Comparison with chemical auxiliary propulsion is made to quantify the advantages of integrated propulsion in terms of weight savings and concomittant launch cost savings.

Dailey, C. L.↗
NASA NTRS1980

Materials Experiment Carrier - An approach to expanded space processing capability

Conceptual design studies and mission analyses within the NASA Materials Processing in Space (MPS) program of the Materials Experiment Carrier (MEC) approach to conducting near-term as well as future free-flying experiments in materials processing in space are discussed. The experimental background of the MPS program is reviewed, and it is pointed out that the use of the MEC coupled with the 25-kW power system can provide an order-of-magnitude cost savings over conventional Shuttle-based systems, as well as increased orbital stay time and microgravity stability. The determination of the physical and engineering requirements for future MEC scientific/commercial candidate payloads is then discussed, and two proposed candidates for the MEC configuration, which is intended to be a self-contained, general-purpose, versatile and reusable carrier, are illustrated. Possible MEC operations are considered, including mission profiles, deployment sequences, on-orbit payload/sample change-out, optimal power system utilization, the use of real-time, ground-based control and advanced automatic payload operation. Areas in which technology development could benefit the MEC project are also identified.

Taylor, K. R.↗
NASA NTRS1978

Performance comparison of earth and space storable bipropellant systems in interplanetary missions

The paper evaluates and compares the performance of earth-storable and space-storable liquid bipropellant propulsion systems in high-energy planetary mission applications, including specifically Saturn and Mercury orbiters, as well as asteroid and comet rendezvous missions. The discussion covers a brief review of the status of space-storable propulsion technology, along with an illustrative propulsion module design for a three-axis stabilized outer planet and cometary mission spacecraft of the Mariner class. The results take revised Shuttle/Upper Stage performance projections into account. It is shown that in some of the missions the performance improvement achievable in the ballistic transfer mode with space-storable spacecraft propulsion can provide a possible alternative to the use of solar-electric propulsion.

Meissinger, H. F.↗
NASA NTRS1975

Improved planetary orbit mission capabilities in the Shuttle era by use of space-storable propulsion systems

Planetary-orbit mission capabilities will be greatly improved by the advent of space-storable retropropulsion systems with liquid fluorine and hydrazine as bipropellants even when the Shuttle/Tug is used as launch vehicle. Having a specific impulse as large as 375 sec, a multimission propulsion module using space-storable propellants with Pioneer or Mariner spacecraft as payload can perform Mercury, Saturn, and Uranus orbiter missions, and even some comet rendezvous missions, more cost effectively and flexibly than one using earth-storable propellants. It also can reduce trip time to the outer planets significantly. This paper presents mission requirements, technology status, system design and performance, development schedules, and costs based on data derived in a recent design and feasibility study.

Meissinger, H. F.↗
NASA NTRS1975

Advanced bipropellant systems for use on planetary orbiters

Planetary orbit mission capabilities will be greatly improved by the advent of space-storable retro-propulsion systems with liquid fluorine/hydrazine as bipropellants, even when the Space Shuttle/Space Tug is used as launch vehicle. With a specific impulse as high as 375 sec, a multimission propulsion module designed for Pioneer or Mariner class spacecraft as payload and using space-storable propellants, can perform Mercury, Saturn and Uranus orbiter missions, and even some comet rendezvous missions. It also can reduce trip times to the outer planets significantly. The paper presents mission requirements, propulsion technology status, system design, performance, development schedules and cost data, based on results of a recent design and feasibility study.

Meissinger, H. F.↗
NASA NTRS1973

Method of and device for determining the characteristics and flux distribution of micrometeorites

A micrometeorite impact sensing method of and device for determining the characteristics and flux distribution of micrometeorites are discussed. The method consists of exposing to the micrometeorite environment, a panel of sheet material of a thickness to be punctured by impacting micrometeorites and then scanning the panel with a scanner which produces an output representing the number and size of the puncture holes in the panel. After, exposure, the panel is scanned for puncture holes by illuminating one side of the panel and retracting the panel into its stowage container past a photoelectric scanner which produces an output representing the incident light.

Meissinger, H. F.↗
NASA NTRS1973

Comet exploration - Scientific objectives and mission strategy for a rendezvous with comet Encke.

A rendezvous mission which includes an extended stay of 80 days or longer in the vicinity of the comet is considered. Such a mission with exploration maneuvers through the coma and tail and circumnavigation of the nucleus is made feasible by the use of solar-electric propulsion. The physical characteristics of comet Encke are examined, giving attention to the icy conglomerate model of the nucleus, solar wind interaction, and chemical composition. Scientific objections are discussed together with mission profile options.

Meissinger, H. F.↗
NASA NTRS1972

A common solar electric upper stage for multi-mission applications.

The concept of using a solar-electric upper stage for multi-mission application is practical, economical, and versatile approach to space expMission capabilities include a Mercury orbiter, asteroid and comet rendezvous, a solar probe, and extra-ecliptic probe, and outer planet flybys and orbiters. The 17.5-kw vehicle has an injected mass of 1500 to 2500 kg and carries up to 500 kg of attached or separable payload packages. Mission characteristics, performance tradeoffs and a concepegn configuration are presented, and program plans, cost estimates and advanced technology requirements are identified.

Meissinger, H. F.↗