Search NASA⌕ Search

Engineering topics

Melliar-Smith, P. M.

Publications and source records attributed to Melliar-Smith, P. M..

12 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

The fault-tolerant multiprocessor computer

The development and evaluation of fault-tolerant computer architectures and software-implemented fault tolerance (SIFT) for use in advanced NASA vehicles and potentially in flight-control systems are described in a collection of previously published reports prepared for NASA. Topics addressed include the principles of fault-tolerant multiprocessor (FTMP) operation; processor and slave regional designs; FTMP executive, facilities, acceptance-test/diagnostic, applications, and support software; FTM reliability and availability models; SIFT hardware design; and SIFT validation and verification.

Smith, T. B., III↗
NASA NTRS1984

Fault tolerant architectures for integrated aircraft electronics systems, task 2

The architectural basis for an advanced fault tolerant on-board computer to succeed the current generation of fault tolerant computers is examined. The network error tolerant system architecture is studied with particular attention to intercluster configurations and communication protocols, and to refined reliability estimates. The diagnosis of faults, so that appropriate choices for reconfiguration can be made is discussed. The analysis relates particularly to the recognition of transient faults in a system with tasks at many levels of priority. The demand driven data-flow architecture, which appears to have possible application in fault tolerant systems is described and work investigating the feasibility of automatic generation of aircraft flight control programs from abstract specifications is reported.

Levitt, K. N.↗
NASA NTRS1984

Development and analysis of the Software Implemented Fault-Tolerance (SIFT) computer

SIFT (Software Implemented Fault Tolerance) is an experimental, fault-tolerant computer system designed to meet the extreme reliability requirements for safety-critical functions in advanced aircraft. Errors are masked by performing a majority voting operation over the results of identical computations, and faulty processors are removed from service by reassigning computations to the nonfaulty processors. This scheme has been implemented in a special architecture using a set of standard Bendix BDX930 processors, augmented by a special asynchronous-broadcast communication interface that provides direct, processor to processor communication among all processors. Fault isolation is accomplished in hardware; all other fault-tolerance functions, together with scheduling and synchronization are implemented exclusively by executive system software. The system reliability is predicted by a Markov model. Mathematical consistency of the system software with respect to the reliability model has been partially verified, using recently developed tools for machine-aided proof of program correctness.

Goldberg, J.↗
NASA NTRS1983

An interval logic for higher-level temporal reasoning

Prior work explored temporal logics, based on classical modal logics, as a framework for specifying and reasoning about concurrent programs, distributed systems, and communications protocols, and reported on efforts using temporal reasoning primitives to express very high level abstract requirements that a program or system is to satisfy. Based on experience with those primitives, this report describes an Interval Logic that is more suitable for expressing such higher level temporal properties. The report provides a formal semantics for the Interval Logic, and several examples of its use. A description of decision procedures for the logic is also included.

Schwartz, R. L.↗
NASA NTRS1983

Investigation, Development, and Evaluation of Performance Proving for Fault-tolerant Computers

A number of methodologies for verifying systems and computer based tools that assist users in verifying their systems were developed. These tools were applied to verify in part the SIFT ultrareliable aircraft computer. Topics covered included: STP theorem prover; design verification of SIFT; high level language code verification; assembly language level verification; numerical algorithm verification; verification of flight control programs; and verification of hardware logic.

Levitt, K. N.↗
NASA NTRS1983

STP: A Mechanized Logic for Specification and Verification

A logic and proof theory that was mechanized and successfully applied to prove nontrivial properties of a fully distributed fault tolerant system is described. The system is close to achieving the critical balance in man machine interaction necesary for successful application by users other than the system developers. Motivation for the form of man machine interaction embodied by STP is discussed. A formal description of the logic and the proof theory is contained, and the description illustrated with an example. The use of STP in a large scale effort to prove nontrivial properties on SIFT, a distributed Software Implemented Fault Tolerant operating system for aircraft flight control is discussed. Finally, directions for further work are described.

Shostak, R. E.↗
NASA NTRS1983

Specifying and Verifying Ultra-reliability and Fault-tolerance Properties

A methodology to rigorously verify ultrareliability and fault tolerance system properties is described. The methodology utilizes a hierarchy of formal mathematical specifications of system design and incremental design proof to prove the system has the desired properties. A small example of the approach is given, and the application of the methodology to the large scale proof of SIFT, a fault tolerant flight control operating system, is discussed.

Schwartz, R. L.↗
NASA NTRS1983

Development of software fault-tolerance techniques

As computers become more widely used, and in particular as they become used in more safety critical applications, the reliability of the computer system and its software becomes more important. There is also an increasing need for high levels of reliability in applications involving very large numbers of inexpensive units where recall of the units would be disproportionately expensive. The nature of faults and the assumptions made by different approaches to correct operation are considered. The recovery block approach is described and a probabilistic analysis of its effectiveness, with and without correlated design errors is provided. Mechanisms for generating acceptance tests from specifications, and for providing recovery in the presence of asynchrony, are described. An analysis of, and design for, the provision of recovery blocks in the microprogram of the Bendix BDX930 processor is provided. An example of the use of recovery blocks in a simple operating system is also provided.

Melliar-Smith, P. M.↗
NASA NTRS1982

Formal specification and mechanical verification of SIFT - A fault-tolerant flight control system

The paper describes the methodology being employed to demonstrate rigorously that the SIFT (software-implemented fault-tolerant) computer meets its requirements. The methodology uses a hierarchy of design specifications, expressed in the mathematical domain of multisorted first-order predicate calculus. The most abstract of these, from which almost all details of mechanization have been removed, represents the requirements on the system for reliability and intended functionality. Successive specifications in the hierarchy add design and implementation detail until the PASCAL programs implementing the SIFT executive are reached. A formal proof that a SIFT system in a 'safe' state operates correctly despite the presence of arbitrary faults has been completed all the way from the most abstract specifications to the PASCAL program.

Melliar-Smith, P. M.↗
NASA NTRS1981

Hierarchical specification of the SIFT fault tolerant flight control system

The specification and mechanical verification of the Software Implemented Fault Tolerance (SIFT) flight control system is described. The methodology employed in the verification effort is discussed, and a description of the hierarchical models of the SIFT system is given. To meet the objective of NASA for the reliability of safety critical flight control systems, the SIFT computer must achieve a reliability well beyond the levels at which reliability can be actually measured. The methodology employed to demonstrate rigorously that the SIFT computer meets as reliability requirements is described. The hierarchy of design specifications from very abstract descriptions of system function down to the actual implementation is explained. The most abstract design specifications can be used to verify that the system functions correctly and with the desired reliability since almost all details of the realization were abstracted out. A succession of lower level models refine these specifications to the level of the actual implementation, and can be used to demonstrate that the implementation has the properties claimed of the abstract design specifications.

Melliar-Smith, P. M.↗
NASA NTRS1978

SIFT - Design and analysis of a fault-tolerant computer for aircraft control

SIFT (Software Implemented Fault Tolerance) is an ultrareliable computer for critical aircraft control applications that achieves fault tolerance by the replication of tasks among processing units. The main processing units are off-the-shelf minicomputers, with standard microcomputers serving as the interface to the I/O system. Fault isolation is achieved by using a specially designed redundant bus system to interconnect the processing units. Error detection and analysis and system reconfiguration are performed by software. Iterative tasks are redundantly executed, and the results of each iteration are voted upon before being used. Thus, any single failure in a processing unit or bus can be tolerated with triplication of tasks, and subsequent failures can be tolerated after reconfiguration. Independent execution by separate processors means that the processors need only be loosely synchronized, and a novel fault-tolerant synchronization method is described.

Wensley, J. H.↗