Search NASA⌕ Search

Engineering topics

Menachem Rafaelof

Publications and source records attributed to Menachem Rafaelof.

15 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Acoustics Technical Working Group and UAM Noise Working Group Proceedings

The NASA Acoustics Technical Working Group Meeting originally started as a program planning meeting in 1992 and has grown through the years. The purpose of these biannual meetings is to foster communication and collaboration among NASA researchers and their university, industry, and government colleagues on activities and work of current and future mutual interest. The NASA-led Urban Air Mobility (UAM) Noise Working Group (UNWG) Meeting began in 2018 as a one-day meeting immediately following the Acoustics Technical Working Group Meeting. The UNWG utilizes four subgroups that conduct regular meetings throughout the year to focus on challenges facing UAM vehicles for community noise and acceptance. The four subgroups coordinate research for development of noise prediction tools/noise reduction technologies, ground and flight test methods, human response and metrics, and regulations and policy (led by the FAA). This work is a compilation of the presentations given at ATWG/UNWG Fall 2022 held in person and via Teams at NASA Glenn Research Center. All NASA content was previously submitted through STRIVES for public presentation. This is merely a compilation. Non-NASA content has permission to distribute. Slide 208 video is included in the Available Downloads as Medial.MOV.

Advanced Air Mobility↗
NASA NTRS2022

An Algorithm for Statistical Audibility Prediction (SAP) of an Arbitrary Signal in the Presence of Noise

A method for predicting the audibility of an arbitrary time-varying noise (signal) in the presence of masking noise has been developed. The statistical audibility prediction (SAP) method relies on the specific loudness, or loudness perceived through the individual auditory filters, for accurate statistical estimation of audibility vs. time. More recent development has focused on derivation and inclusion of frequency-dependent correction factors in SAP’s model to account for the ability to hear signals below the level of the masking noise. Audibility prediction vs. time is intuitive since it captures changes in audibility with time as it occurs, which is critical for the study of human response to noise. Concurrently time-frequency prediction of audibility may also provide valuable information about the root cause(s) for audibility useful for the design and operation of sources of noise. Empirical data, gathered under a three-alternative forced-choice (3AFC) test paradigm for low-frequency sound, has been used to examine the accuracy of SAP.

audibility↗
NASA NTRSDate not supplied

Community Noise Assessment of Urban Air Mobility Vehicle Operations using the FAA Aviation Environmental Design Tool

In contrast to most commercial air traffic today, vehicles serving the urban air mobility (UAM) market are anticipated to operate in communities close to the public at large. The approved model for assessing environmental impact of air traffic actions in the United States, the Federal Aviation Administration’s Aviation Environmental Design Tool (AEDT), does not support analysis of such operations due to a combined lack of a UAM aircraft performance model and aircraft noise data. This paper discusses the initial development of a method to assess the acoustic impact of UAM fleet operations on the community using AEDT and demonstrates its use for representative UAM operations. In particular, methods were developed using fixed-point flight profiles and user-supplied noise data in a manner that avoids unwanted behavior in AEDT. A set of 32 routes in the Dallas-Ft. Worth area were assessed for single and multiple (fleet) operations for two concept vehicles.

urban air mobility↗
NASA NTRSDate not supplied

AIRNOISEUAM: An Urban Air Mobility Noise-Exposure Prediction Tool

A new software tool called AIRNOISEUAM is introduced that models the noise exposure of Urban Air Mobility (UAM) operations. Given relevant UAM aircraft performance models, mission profiles, and Noise-Power-Distance data, AIRNOISEUAM predicts the noise exposure footprint for receptors on the ground. The performance of AIRNOISEUAM using a Robinson R66 helicopter model and a six-passenger quadrotor model, and a diverse set of scenarios from NASA’s UAM human-in-the-loop simulations is compared to that of the industry-standard tool with the same inputs. The predicted noise exposure results from both tools are found to be nearly identical. AIRNOISEUAM offers a fast-time, flexible interface and modular design to facilitate the dynamic requirements of the aviation research community.

Urban air mobility↗
NASA NTRSDate not supplied

AIRNOISEUAM: An Urban Air Mobility Noise-Exposure Prediction Tool

A new software tool called AIRNOISEUAM is introduced that models the noise exposure of Urban Air Mobility (UAM) operations. Given relevant UAM aircraft performance models, mission profiles, and Noise-Power-Distance data, AIRNOISEUAM predicts the noise exposure footprint for receptors on the ground. The performance of AIRNOISEUAM using a Robinson R66 helicopter model and a six-passenger quadrotor model, and a diverse set of scenarios from NASA’s UAM human-in-the-loop simulations is compared to that of the industry-standard tool with the same inputs. The predicted noise exposure results from both tools are found to be nearly identical. AIRNOISEUAM offers a fast-time, flexible interface and modular design to facilitate the dynamic requirements of the aviation research community.

Urban Air Mobility↗
NASA NTRSDate not supplied

Community Noise Assessment of Urban Air Mobility Vehicle Operations using the FAA Aviation Environmental Design Tool

In contrast to most commercial air traffic today, vehicles serving the urban air mobility (UAM) market are anticipated to operate in communities close to the public at large. The approved model for assessing environmental impact of air traffic actions in the United States, the Federal Aviation Administration’s Aviation Environmental Design Tool (AEDT), does not support analysis of such operations due to a combined lack of a UAM aircraft performance model and aircraft noise data. This paper discusses the initial development of a method to assess the acoustic impact of UAM fleet operations on the community using AEDT and demonstrates its use for representative UAM operations. In particular, methods were developed using fixed-point flight profiles and user-supplied noise data in a manner that avoids unwanted behavior in AEDT. A set of 32 routes in the Dallas-Ft. Worth area were assessed for single and multiple (fleet) operations for two concept vehicles.

urban air mobility↗
NASA NTRSDate not supplied

Second-Generation UAM Community Noise Assessment Using the FAA Aviation Environmental Design Tool

Vehicles serving the urban air mobility (UAM) market are anticipated to operate in communities close to the public at large. The approved model for assessing environmental impact of air traffic actions in the United States, the Federal Aviation Administration’s Aviation Environmental Design Tool (AEDT), does not support analysis of such operations due to a combined lack of a UAM aircraft performance model and aircraft noise data. This paper discusses second-generation developments to assess the acoustic impact of UAM fleet operations on the community using AEDT and demonstrates its use for representative UAM operations. In particular, methods were developed to add broadband self noise into computed noise-power-distance data, and vertiport-centric operations were evaluated for two concept vehicles.

urban air mobility↗
NASA NTRSDate not supplied

Multilevel Probit Regression for 3-Alternative Forced Choice Audibility Testing

A recent psychoacoustic test at NASA Langley generated a dataset of 3-alternative forced-choice responses for 40 subjects that measured the audibility of a tone complex in a shaped broadband masker. The task was completed by 4 subjects at a time in a small theatre-like environment using predetermined stimuli levels. These data were subject to 4 forms of probit regression: a “complete pooling” analysis in which all data from the test was fit with one curve, two forms of “no pooling” analyses in which subjects’ data were treated individually (using both packaged and custom software), and a “partial pooling” analysis in which multilevel-regression software fit both individual curves as well as population-level parameters at the same time. The results of the analyses are compared in terms of both individual- and population-level parameters. Partial pooling appears to give the most consistent results at both levels, as well as provide the most robustness among the packaged approaches (albeit with added complexity over single-level regression). These results are also contained in a recent NASA technical memorandum entitled “Comparisons of Analysis Methods Applied to Alternative Forced Choice Audibility Data.”

Psychoacoustics↗
NASA NTRSDate not supplied

On the Modeling of UAM Aircraft Community Noise in AEDT Helicopter Mode

In contrast to most commercial air traffic today, vehicles serving the urban air mobility (UAM) market are anticipated to operate within communities and be close to the public at large. The approved model for assessing environmental impact of air traffic actions in the United States, the Federal Aviation Administration (FAA) Aviation Environmental Design Tool (AEDT), does not directly support analysis of such operations. Prior work focused on modeling UAM aircraft within AEDT under fixed-wing mode. This paper addresses the modeling of UAM aircraft under helicopter mode, using requisite noise-power-distance data generated through analysis. Results are compared with those from the fixed-wing approach and a hybrid approach. The latter models some flight segments in fixed-wing mode and others in helicopter mode.

aircraft community noise↗
NASA NTRSDate not supplied

A Psychoacoustic Test for Urban Air Mobility Vehicle Sound Quality

This paper describes a psychoacoustic test in the Exterior Effects Room (EER) at the NASA Langley Research Center. The test investigated the degree to which sound quality metrics (sharpness, tonality, etc.) are predictive of annoyance to notional sounds of Urban Air Mobility (UAM) vehicles (i.e., air taxis). A suite of 136 unique (4.6 second duration) UAM rotor noise stimuli was generated. These stimuli were based on aeroacoustic predictions of a NASA reference UAM quadrotor aircraft under two flight conditions. The synthesizer changed rotor noise parameters such as the blade passage frequency, the relative level of broadband self-noise, and the relative level of tonal motor noise. With loudness constant, the synthesis parameters impacted sound quality in a way that created a spread of predictors both in synthesizer parameters and in sound quality metrics. Forty subjects listened to the suite of UAM noise stimuli in the EER and judged each sound individually on a standard scale of annoyance. Additionally, a subset of the UAM noise stimuli were compared to a reference sound that varied in loudness. From these responses, the relative effect of changes in loudness or changes in other sound quality metrics on annoyance was evaluated. This paper covers background and motivation for the test, details of how the sound stimuli were generated, and details of the test design and execution. Test results investigate how sound quality may affect perceived annoyance to UAM vehicle noise, indicating the importance of sharpness, tonality, impulsiveness, and roughness on annoyance to UAM noise.

UAM↗