Search NASA⌕ Search

Engineering topics

Merzari, E.

Publications and source records attributed to Merzari, E..

31 records · Page 2

Numerical Simulation of Twin Jets using LES with the Nek5000 Code

The twin jet activity, a joint effort between Texas A and M University, University of Tennessee - Knoxville, and Argonne National Laboratory, is being used to analyze the performance of various computational fluid dynamics (CFD) code packages. The twin jet water facility (TJWF) is based off a semi-classical problem of combining planar turbulent jets in a large free-shear environment or enclosure. The problem is similar to physics seen in advanced reactor designs such as in the large upper plena of a sodium fast reactor. Utilizing the experimental data sets created using laser Doppler velocimetry (LDV) and particle image velocimetry (PIV), the Nek5000 code, among others, is qualitatively compared to the experimental work. This effort is a starting point for determining the appropriate simulation techniques needed for resolving the twin jet physics.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Steady and unsteady calculations on thermal striping phenomena in triple-parallel jet

The phenomenon of thermal striping is encountered in liquid metal cooled fast reactors (LMFR), in which temperature fluctuation due to convective mixing between hot and cold fluids can lead to a possibility of crack initiation and propagation in the structure due to high cycle thermal fatigue. Using sodium experiments of parallel triple jets configuration performed by Japan Atomic Energy Agency (JAEA) as benchmark, numerical simulations were carried out to evaluate the temperature fluctuation characteristics in fluid and the transfer characteristics of temperature fluctuation from fluid to structure, which is important to assess the potential thermal fatigue damage. In this study, both steady (RANS) and unsteady (URANS, LES) methods were applied to predict the temperature fluctuations of thermal striping. The parametric studies on the effects of mesh density and boundary conditions on the accuracy of the overall solutions were also conducted. The velocity, temperature and temperature fluctuation intensity distribution were compared with the experimental data. As expected, steady calculation has limited success in predicting the thermal–hydraulic characteristics of the thermal striping, highlighting the limitations of the RANS approach in unsteady heat transfer simulations. The unsteady results exhibited reasonably good agreement with experimental results for temperature fluctuation intensity, as well as the average temperature and velocity components at the measurement locations.

Yu, Y. Q.↗

Coupled Calculations in Helical Steam Generator: Validation on Legacy Data

The NEAMS program aims to develop an integrated multi-physics simulation capability “pellet-to-plant” for the design and analysis of future generations of nuclear power plants. In particular, the Reactor Product Line code suite's multi-resolution hierarchy is being designed to ultimately span the full range of length and time scales present in relevant reactor design and safety analyses, as well as scale from desktop to petaflop computing platforms. Flow-induced vibration (FIV) is widespread problem in energy systems because they rely on fluid movement for energy conversion. Vibrating structures may be damaged as fatigue or wear occurs. Given the importance of reliable components in the nuclear industry, flow-induced vibration has long been a major concern in safety and operation of nuclear reactors. In particular, nuclear fuel rods and steam generators have been known to suffer from flow-induced vibration and related failures. Advanced reactors, such as integral Pressurized Water Reactors (PWRs) considered for Small Modular Reactors (SMR), often rely on innovative component designs to meet cost and safety targets. One component that is the subject of advanced designs is the steam generator, some designs of which forego the usual shell-and-tube architecture in order to fit within the primary vessel. In addition to being more cost- and space-efficient, such steam generators need to be more reliable, since failure of the primary vessel represents a potential loss of coolant and a safety concern. A significant amount of data exists on flow-induced vibration in shell-and-tube heat exchangers, and heuristic methods are available to predict their occurrence based on a set of given assumptions. In contrast, advanced designs have far less data available. Advanced modeling and simulation based on coupled structural and fluid simulations have the potential to predict flow-induced vibration in a variety of designs, reducing the need for expensive experimental programs, especially at the design stage. Over the past five years, the Reactor Product Line has developed the integrated multi-physics code suite SHARP. The goal of developing such a tool is to perform multi-physics neutronics, thermal/fluid, and structural mechanics modeling of the components inside the full reactor core or portions of it with a user-specified fidelity. In particular SHARP contains high-fidelity single-physics codes Diablo for structural mechanics and Nek5000 for fluid mechanics calculations. Both codes are state-of-the-art, highly scalable tools that have been extensively validated. These tools form a strong basis on which to build a flow-induced vibration modeling capability. In this report we discuss one-way coupled calculations performed with Nek5000 and Diablo aimed at simulating available FIV experiments in helical steam generators in the turbulent buffeting regime. In this regime one-way coupling is judged sufficient because the pressure loads do not cause substantial displacements. It is also the most common source of vibration in helical steam generators at the low flows expected in integral PWRs. The legacy data is obtained from two datasets developed at Argonne and B&W.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Large Eddy Simulations for a Helical Coil Steam Generator

The desire for scalable power plants in remote locations and specialized applications has brought forth the small modular reactor (SMR). Now, smaller light water reactors are seen as viable means for meeting global energy requirements. Generally, straight or U-shape tubes are used to exchange heat from the primary to secondary coolant; however this is not ideal when size is a criterion. Helical coil steam generators (HCSGs) are advantageous for SMRs due to their enhanced heat transfer in compact spaces. Still, there is the concern of safety as steam generator tubes could rupture due to vibrations and fatigue on the material. Understanding flow characteristics and quantifying pressures for these tubes are important components for the design of safety and efficiency in these steam generators. The current study uses the spectral element computational fluid dynamic (CFD) code, Nek5000, to develop large eddy simulations (LES) for validation against experiments that will be conducted at Texas A and M University. Time-averaged pressure data will be compared with pressure tap readings, and velocity profile with particle image velocimetry (PIV) measurements. The presented preliminary results investigate the differences between 5.-, 7.-, and 9.-order polynomial simulations. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Wire-Wrapped Fuel Pin Effect of Bundle Size on Temperature Distribution for Uniform Heat Flux

A common fuel arrangement for Sodium Fast Reactors (SFR) designs are hexagonal arrays of wire wrapped fuel pins. The helically wound wires redirect coolant to neighboring subchannels and increases mixing. The increased mixing of the coolant is beneficial to heat transfer from the fuel and prevents temperature peaking in hot channels that may occur. The purpose of this study is to observe the effect of bundle size on the temperature distribution of a coolant when a constant heat flux is implemented. Bundles of 19, 37, 61, and 91 pins were modeled. The wire-wrapping on fuel pins encourages interchannel mixing. With a constant heat flux the enhanced interchannel mixing has little observable effect. The temperature distributions of the subchannels has negligible dependence on radial or angular position. The temperature distribution additionally shows negligible dependence on the bundle size. The subchannel average temperatures further illustrate the homogeneity of the temperature across the bundles. Similarly oriented subchannels differ by less than two Kelvin. The temperature distribution within a single subchannel is fairly uniform, differing by about 15 K between the wall and the bulk flow, with the exception of two hot spots. The two hot spots, however, occur in two non-geometrically accurate locations, so little analysis can be performed. To better illustrate the effect of the enhanced mixing of the wire-wrapped fuel pins, a hot pin analysis should be performed to observe how the additional, non-uniform heat is dispersed. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A High-Fidelity Approach for the Simulation of Flow-Induced Vibration

Flow-induced vibration (FIV) is a widespread problem in energy systems becausethey rely on fluid movement for energy conversion. Vibrating structures may be damaged as fatigue or wear occur. Given the importance of reliable components in the nuclear industry, flow-induced vibrations have long been a major concern in the safety and operation of nuclear reactors. In particular,nuclear fuel and steam generators have been known to suffer from flow-induced vibrations and related failures. Over the past five years, the Nuclear EnergyAdvanced Modeling and Simulation program has developed the integrated multiphysics code suite SHARP. The goal of developing such a tool is to perform multiphysics modeling of the components inside a reactor core, the full reactor core or portions of it, and be able to achieve that with various levelsof fidelity. This flexibility allows users to select the appropriate level of fidelity for their computational resources and design constraints.In particular SHARP contains high-fidelity single-physics codes for structural mechanics and fluid mechanics calculations: the structural mechanics implicit code Diablo and the computational fluid dynamics spectral element code Nek5000. Both codes are state-of-the-art.highly scalable (up to millions of processors in the case of Nek5000) tools that have been extensively validated. These tools form a strong basis on which to build an FIV modeling capability.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Full Core Multiphysics Simulation with Offline Mesh Deformation

In this report, building on previous reports issued in FY13 we describe our continued efforts to integrate thermal/hydraulics, neutronics, and structural mechanics modeling codes to perform coupled analysis of a representative fast sodium-cooled reactor core. The focus of the present report is a full core simulation with off-line mesh deformation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Multi-Physics Demonstration Problem with the SHARP Reactor Simulation Toolkit

This report describes to employ SHARP to perform a first-of-a-kind analysis of the core radial expansion phenomenon in an SFR. This effort required significant advances in the framework Multi-Physics Demonstration Problem with the SHARP Reactor Simulation Toolkit used to drive the coupled simulations, manipulate the mesh in response to the deformation of the geometry, and generate the necessary modified mesh files. Furthermore, the model geometry is fairly complex, and consistent mesh generation for the three physics modules required significant effort. Fully-integrated simulations of a 7-assembly mini-core test problem have been performed, and the results are presented here. Physics models of a full-core model of the Advanced Burner Test Reactor have also been developed for each of the three physics modules. Standalone results of each of the three physics modules for the ABTR are presented here, which provides a demonstration of the feasibility of the fully-integrated simulation.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The MAX facility for CFD code validation

ANL has recently completed construction of a fluid dynamics test facility devised to provide validation data for CFD simulation tools used to evaluate various aspects of nuclear power plant design and safety. Experiments with the facility involve mixing air jets within a 1x1x1.7m long glass tank at atmospheric pressure. A particle image velocimetry system measures flow velocity and turbulence quantities within the tank while a high-speed infrared camera records temperatures across the tank lid. The tandem of high fidelity thermal and turbulence data is particularly useful for benchmarking transient heat transfer phenomena such as thermal striping. This paper describes the MAX facility, preliminary data obtained during shakedown tests, and the results of companion CFD calculations employing RANS-based Star-CCM+ and large eddy simulations with Nek 5000. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗