Search NASA⌕ Search

Engineering topics

Mewes, Tim

Publications and source records attributed to Mewes, Tim.

Suppression of spin pumping at metal interfaces

An electrically conductive metal typically transmits or absorbs a spin current. Here, we report on evidence that interfacing two metal thin films can suppress spin transmission and absorption. We examine spin pumping in spin-source/spacer/spin-sink heterostructures, where the spacer consists of metallic Cu and Cr thin films. The Cu/Cr spacer largely suppresses spin pumping—i.e., neither transmitting nor absorbing a significant amount of spin current—even though Cu or Cr alone transmits a sizable spin current. The antiferromagnetism of Cr is not essential for the suppression of spin pumping, as we observe similar suppression with Cu/V spacers with V as a nonmagnetic analog of Cr. We speculate that diverse combinations of spin-transparent metals may form interfaces that suppress spin pumping, although the underlying mechanism remains unclear. Our work may stimulate a new perspective on spin transport in metallic multilayers.

30 DIRECT ENERGY CONVERSION↗

Ultralow effective Gilbert damping and induced orbital moment in strain-engineered FeGe films with Curie temperature exceeding room temperature

We report the magnetic and magnetodynamic properties of strained epitaxial FeGe thin films on Ge(111) substrates, and confirm the generation of orbital moment in tensile-strained FeGe not seen in bulk or unstrained films. In-plane tensile strain resulted in an increase of the magnetic transition temperature to 350 K, likely the result of decreased Fe–Fe bond lengths that increase spin–orbit coupling strength. X-ray magnetic circular dichroism (XMCD) shows orbital-to-spin magnetic moment ratios of 0.18 and 0.14 for films of 18 nm and 72 nm thickness, respectively, indicative of partially quenched atomic orbitals. Finally, a very low effective Gilbert damping parameter, α eff = 0.003 ± 0.001 at room temperature was observed, suggesting that strained FeGe could be useful for spintronic applications.

36 MATERIALS SCIENCE↗

M-STAR: Magnetism second target advanced reflectometer at the Spallation Neutron Source

M-STAR is a next generation polarized neutron reflectometer with advanced capabilities. A new focusing guide concept is optimized for samples with dimensions down to a millimeter range. A proposed hybrid pulse-skipping chopper will enable experiments at constant geometry at one incident angle in a broad range of wavevector transfer Q up to 0.3 A –1 for specular, off-specular, and GISANS measurements. M-STAR will empower nanoscience and spintronics studies routinely on small samples (~2 × 2 mm 2 ) and of atomic-scale thickness using versatile experimental conditions of magnetic and/or electric fields, light, and temperature applied in situ to novel complex device-like nanosystems with multiple buried interfaces. M-STAR will enable improved grazing incidence diffraction measurements, as a surface-sensitive depth-resolved probe of, e.g., the out-of-plane component of atomic magnetic moments in ferromagnetic, antiferromagnetic, and more complex structures as well as in-plane atomic-scale structures inaccessible with contemporary diffractometry and reflectometry. New horizons will be opened by the development of an option to probe near-surface dynamics with inelastic grazing incidence scattering in the time-of-flight mode. These novel options in combination with ideally matched parameters of the second target station will place M-STAR in the world’s leading position for high resolution polarized reflectometry.

47 OTHER INSTRUMENTATION↗

Magnetism and spin dynamics in room-temperature van der Waals magnet Fe 5 GeTe 2

Two-dimensional van der Waals (vdWs) materials have gathered a lot of attention recently. However, the majority of these materials have Curie temperatures that are well below room temperature, making it challenging to incorporate them into device applications. In this work, we synthesized a room-temperature vdW magnetic crystal Fe 5 GeTe 2 with a Curie temperature T c = 332 K, and studied its magnetic properties by vibrating sample magnetometry (VSM) and broadband ferromagnetic resonance (FMR) spectroscopy. The experiments were performed with external magnetic fields applied along the c -axis (H∥ c ) and the ab -plane (H∥ ab ), with temperatures ranging from 300 to 10 K. We have found a sizable Landé g -factor difference between the H∥ c and H∥ ab cases. In both cases, the Landé g -factor values deviated from g = 2. This indicates contribution of orbital angular momentum to the magnetic moment. The FMR measurements reveal that Fe 5 GeTe 2 has a damping constant comparable to Permalloy. With reducing temperature, the linewidth was broadened. Together with the VSM data, our measurements indicate that Fe 5 GeTe 2 transitions from ferromagnetic to ferrimagnetic at lower temperatures. Our experiments highlight key information regarding the magnetic state and spin scattering processes in Fe 5 GeTe 2 , which promote the understanding of magnetism in Fe 5 GeTe 2 , leading to implementations of Fe 5 GeTe 2 based room-temperature spintronic devices.

36 MATERIALS SCIENCE↗