Search NASA⌕ Search

Engineering topics

Meyers, G. J.

Publications and source records attributed to Meyers, G. J..

5 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Fracture mechanics applied to elevated temperature crack growth

Twenty-six isothermal crack growth tests were performed on Hastelloy-X tubular specimens at a variety of temperatures and strain ranges. Conditions were selected to include nominally elastic and nominally plastic conditions. A number of parameters including the stress intensity factor, strain intensity factor, J-integral, Crack Opening Displacement, and Tompkins model were examined for their ability to correlate the data. Test conditions were selected such that growth rates at a single value of the parameter were obtained at radially different crack lengths, thus exploring the geometry independence of the correlating parameter. None of the parameters were fully satisfactory. However, COD calculated from J-integral appeared to be the most successful.

Jordan, E. H.↗
NASA NTRS1986

Fracture mechanics applied to nonisothermal fatigue crack growth

Twelve nonisothermal fatigue crack growth tests were performed on Hastelloy-X tubular specimens in which strain and temperature varied simultaneously. Conditions were selected to include nominally elastic and nominally plastic conditions and temperatures up to 982 C. A number of parameters, including the stress intensity factor, strain intensity factor, and J-integral, were examined for their ability to correlate the data. There was no decisive difference between the success of the three parameters. Each parameter correlated data from different strain ranges to within no worse than a factor of 2.1 on da/dn. The effect of strain temperature cycle shape was investigated and found to be moderate, while a strain hold of 1 min had very little effect. An attempt was made to predict nonisothermal test results from isothermal data. These predictions were better than those made by using peak test temperature isothermal data but still not within scatter.

Jordan, E. H.↗
NASA NTRS1982

Fracture mechanics criteria for turbine engine hot section components

The application of several fracture mechanics data correlation parameters to predicting the crack propagation life of turbine engine hot section components was evaluated. An engine survey was conducted to determine the locations where conventional fracture mechanics approaches may not be adequate to characterize cracking behavior. Both linear and nonlinear fracture mechanics analyses of a cracked annular combustor liner configuration were performed. Isothermal and variable temperature crack propagation tests were performed on Hastelloy X combustor liner material. The crack growth data was reduced using the stress intensity factor, the strain intensity factor, the J integral, crack opening displacement, and Tomkins' model. The parameter which showed the most effectiveness in correlation high temperature and variable temperature Hastelloy X crack growth data was crack opening displacement.

Meyers, G. J.↗
NASA NTRS1982

Nonlinear structural and life analyses of a combustor liner

Three dimensional, nonlinear finite element structural analyses were performed for a simulated combustor liner specimen to assess the capability of nonlinear analyses using classical inelastic material models to represent the thermoplastic creep response of the one half scale component. Results indicate continued cyclic hardening and ratcheting while experimental data suggested a stable stress strain response after only a few loading cycles. The computed stress strain history at the critical location was put into two life prediction methods, strainrange partitioning and a Pratt and Whitney combustor life prediction method to evaluate their ability to predict cyclic crack initiation. It is found that the life prediction analyses over predicted the observed cyclic crack initiation life.

Moreno, V.↗