Search NASA⌕ Search

Engineering topics

Michael Kavaya

Publications and source records attributed to Michael Kavaya.

16 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Wind Profiling With the Airborne Doppler Aerosol Wind Lidar During the 2022 Convective Processes Experiment

The 2017 Decadal Survey for Earth Science and Applications from Space (ESAS 2017) identifies a critical need for improving our understanding of Planetary Boundary Layer (PBL) processes and air-surface fluxes as well as why clouds, convection, and heavy precipitation occur when and where they do. Lidars are uniquely capable of collecting high precision and high spatio-temporal observations that have been used for atmospheric process studies from the ground, aircraft, and space. The wind lidar team at the NASA Langley Research Center (LaRC) started the development of Doppler wind lidar more than a decade ago to demonstrate technologies required for an Earth-orbiting system to globally measure wind profiles. Since then, an airborne Doppler Aerosol WiNd (DAWN) lidar system has been developed and participated in a series of field campaigns. The Doppler Aerosol WiNd (DAWN) lidar uses atmospheric aerosol motion to derive vertical profiles of horizontal wind speed and direction beneath the aircraft. In September 2022, DAWN, along with a suite of other instruments, was flown on a NASA DC-8 as part of The Convective Processes EXperiment – Cabo Verde (CPEX-CV) field campaign. A main objective of CPEX was to obtain a comprehensive set of temperature, humidity and, particularly, wind observations over tropical waters in undisturbed conditions, Saharan dust outbreaks, and in the vicinity of scattered through organized deep convection in all phases of the convective life cycle. DAWN collected data for approximately 90 hours across 13 CPEX-CV science flights. Airborne Vertical Atmospheric Profiling System (AVAPS) dropsondes were dropped throughout the flight for profiling the atmosphere and validating the DAWN instrument. DAWN had co-located data with 347 AVAPS NRD41 dropsondes, providing 32,117 vertical levels for a comprehensive validation of DAWN wind retrievals. DAWN showed very good agreement with dropsondes of ~0.2 m/s bias and ~1.8 m/s RMS. Given this agreement, DAWN is considered to be a worthy reference dataset, and its retrievals have been compared to winds derived from GOES Atmospheric Motion Vectors (AMVs), Advanced Scatterometer winds (ASCAT), and model data from GFS, GEOS, and MERRA-2 to better understand the quality of our current models and satellite wind observations. The proposed presentation will provide a brief description of the DAWN instrument, discuss the synergistic observations collected across a wide range of atmospheric conditions sampled during the CPEX-CV flights, and a summary of comparisons between DAWN, GOES AMV, ASCAT, and model analyses/predictions, with an emphasis on the PBL.

DAWN↗
NASA NTRSDate not supplied

An Overview of the NASA ADM-Aeolus Cal/Val Test Flight Campaign

Lidars are uniquely capable of collecting high precision and high spatio-temporal observations that have been used for atmospheric process studies from the ground, aircraft, and space for over 30 years. The Atmospheric Dynamics Mission Aeolus (ADM-Aeolus), the first-ever spaceborne Doppler wind lidar, was developed by the European Space Agency and launched in August 2018. The ADM-Aeolus Atmospheric Laser Doppler Instrument (ALADIN) observes profiles of the component of the wind vector and aerosol optical properties along the instrument’s line-of-sight direction on a global scale. Two airborne lidar systems have been developed at NASA Langley Research Center in recent years that collect measurements in support of several NASA Earth Science Division focus areas. The Doppler Aerosol WiNd (DAWN) lidar measures vertical profiles of horizontal wind speed and direction. The High Altitude Lidar Observatory (HALO) measure high resolution profiles of atmospheric water vapor (WV) and aerosol and cloud optical properties. Though new space-based missions with advanced capabilities such as Aeolus are continuously being conceived and developed, there are limitations in terms of spatial and vertical detail and measurement precision that can be accomplished from space, thus airborne remote sensing observations like those from DAWN and HALO are required to fill these observational gaps as well as to calibrate and validate space-based measurements. Over a two-week period in April 2019 during their Aeolus Cal/Val Test Flight campaign, NASA conducted five research flights over the Eastern Pacific Ocean with the DC-8 aircraft to 1) demonstrate the DAWN Doppler wind lidar, HALO high spectral resolution lidar aerosol/cloud measurement and differential absorption lidar WV measurement capabilities across a range of atmospheric conditions, 2) demonstrate Aeolus Cal/Val flight strategies and compare DAWN and HALO measurements with Aeolus to gain an initial perspective of Aeolus performance, and 3) demonstrate how atmospheric dynamic processes can be resolved and better understood through simultaneous observations of wind, WV, and aerosol profile observations, coupled with numerical model and other remote sensing observations. This paper provides a brief description of the DAWN and HALO instruments, discusses the synergistic observations collected across a wide range of atmospheric conditions sampled during the DC-8 flights, and a summary of the validation of DAWN, HALO, and Aeolus observations and comparisons.

Kristopher M. Bedka↗
NASA NTRSDate not supplied

Efficient Ho:LuLiF MOPA Laser Transmitter for Space Pathfinder Coherent Wind Lidar

Supported by NASA’s Earth Science Technology Office (ESTO), a new lidar transmitter system is developed under the Wind-Space Pathfinder coherent wind lidar project. It is an efficient Ho:LuLiF master oscillator power amplifier system (MOPA) that is capable of generating 15 watts power and 180 ns pulse width at 200 Hz PRF with excellent beam quality. The laser is injection seeded to provide stable single longitudinal frequency output. The laser beam polarization can be switched between “S” and “P” alternatively. Thus, the “S” and “P” beams can be directed to two separate telescopes at different directions to provide true horizontal wind measurement without a moving part in the lidar system. The laser power, pulse width and beam quality fulfill the space lidar system’s figure-of-merit (FOM) and measurement accuracy requirements.

Coherent laser radar↗
NASA NTRSDate not supplied

Efficient Ho:LuLiF MOPA Laser Transmitter for Space Pathfinder Coherent Wind Lidar

Supported by NASA’s Earth Science Technology Office (ESTO), a new lidar transmitter system is developed under the Wind-Space Pathfinder coherent wind lidar project. It is an efficient Ho:LuLiF master oscillator power amplifier system (MOPA) that is capable of generating 15 watts power and 180 ns pulse width at 200 Hz PRF with excellent beam quality. The laser is injection seeded to provide stable single longitudinal frequency output. The laser beam polarization can be switched between “S” and “P” alternatively. Thus, the “S” and “P” beams can be directed to two separate telescopes at different directions to provide true horizontal wind measurement without a moving part in the lidar system. The laser power, pulse width and beam quality fulfill the space lidar system’s figure-of-merit (FOM) and measurement accuracy requirements.

Coherent Laser Radar↗
NASA NTRSDate not supplied

AWP: NASA's Aerosol Wind Profiler Coherent Doppler Wind Lidar

A new airborne coherent Doppler Wind Lidar (DWL) instrument has been implemented leveraging NASA's development of the 2-micron Wind-Space Pathfinder (Wind-SP) lidar transceiver. A technology development project, Wind-SP refined and demonstrated numerous components required for a coherent-detection space wind lidar instrument. Aerosol Wind Profiler (AWP) transitioned this transceiver into an airborne wind lidar capable of providing full 3-D wind vector retrievals. AWP operates with laser pulse energy and repetition rate combination required for high spatial and vertical resolution wind profiling from space. Operation from aircraft platforms will yield very strong signal return required for detailed process studies at <2km spatial and <100m vertical resolution under most conditions. AWP will serve as NASA’s wind calibration and validation instrument for future space-based wind observations over the coming decades, while also providing data supporting space wind lidar simulation studies. The AWP instrument is introduced and preliminary results from recent AWP demonstration flights are presented.

AWP↗
NASA NTRSDate not supplied

NASA’s Aerosol Wind Profiler (AWP) Coherent Doppler Wind LiDAR

NASA’s Langley Research Center recently completed development of the Aerosol Wind Profiler (AWP) suborbital, 2 µm coherent Doppler wind lidar (CDWL) instrument. The AWP instrument is presented, and the Jan 2023 flight demonstration configuration is described. Data from these demonstration flights are presented. AWP was developed with support from NASA’s Earth Science Technology Office, Earth Science Division, and LaRC Science Directorate.

AWP↗
NASA NTRSDate not supplied

Coherent Doppler Wind Lidar Suborbital and Orbital Activities at NASA Langley Research Center

NASA’s Langley Research Center recently completed development of the Aerosol Wind Profiler (AWP) suborbital coherent Doppler wind lidar (CDWL) instrument. Developed with support from NASA’s Earth Science Technology Office, Earth Science Division, and LaRC Science Directorate, the AWP project adapted the Wind-SP 2 µm transceiver for airborne use. AWP successfully completed demonstration and engineering test flights in January 2023. LaRC has been funded by a NOAA Joint Venture program Suborbital 3-D Wind Measurement Demonstration project to collect and provide AWP data. The first campaign collected > 50 hours of data during the October 2023 EcoDemonstrator campaign on the NASA DC-8, samples of which will be presented here. AWP implemented and demonstrated multiple technologies needed for a space CDWL transceiver, which have continued development towards miniaturization and ruggedization. A space-based CDWL study is being completed that leverages these recent developments, informing a vision for a relatively low-cost orbital CDWL mission that will also be introduced.

AWP↗
NASA NTRSDate not supplied

Aerosol Wind Profiler (AWP) Doppler Wind Lidar Airborne Observations During the NOAA Joint Venture 3-D Wind Measurement Demonstration and NASA Active-Passive Profiling Experiment (APEX)

The NASA Langley Research Center (LaRC) has recently completed development of the Aerosol Wind Profiler (AWP) airborne Doppler wind lidar (DWL) instrument. AWP was supported by the NASA Earth Science Technology Office and the Earth Science Division, a project that adapted the Wind-Space Pathfinder (Wind-SP) DWL transceiver onto a structure for flight aboard a variety of NASA research aircraft. AWP demonstrates many technologies required for a space DWL mission, including a coherent-detection, optical heterodyne laser transmitter with high pulse energy (up to ~55 mJ) and repetition rate (200 Hz), electronic control of the beam path allowing for multiple viewing angles (allowing vector wind measurements) with no moving parts, compact highly-stable and tunable reference lasers allowing for high-precision measurement of velocity at long ranges while mitigating the impact of satellite platform velocity, and many others. AWP represents NASA’s only currently operational airborne 3-D wind profiling sensor. NASA LaRC was selected by the NOAA Joint Venture (JV) program to conduct a suborbital 3-D Wind measurement campaign demonstrate how data from a coherent-detection DWL like AWP could serve NOAA’s weather analysis and forecasting needs. The NOAA JV program is designed to work with the private sector, academia and other federal agencies to explore the feasibility and capability of emerging technologies spacecraft and other mission-specific tools to meet NOAA’s mission requirements. AWP was initially demonstrated on the NASA DC-8 within this JV program in October 2023, piggybacking on the NASA EcoDemonstrator mission focused on in-situ sampling of jet aircraft emissions and contrail formation from Everett, Washington. The in-situ sampling resulted in very frequent and rapid aircraft attitude changes which unfortunately degraded AWP data quality. But, during times with level flight and AVAPS dropsonde operations, AWP demonstrated excellent precision (< 2 m/s RMS) with high vertical (< 100 meter) resolution and 2 km spacing between profiles. AWP will be flown again on the NASA LaRC Gulfstream-3 from mid-September to mid-October 2024 out of Hampton, VA to complete the NOAA JV 3-D wind demonstration. Additional AWP flights will occur in early November from southern California during the NASA Active-Passive Profiling Experiment (APEX), focused on underflights of the NASA ER-2 equipped with many atmospheric profiling sensors. This presentation will summarize AWP measurements collected during these two fall 2024 flight campaigns, and how the AWP data compares with AVAPS dropsonde, NOAA weather prediction model, and GOES atmospheric motion vector data.

Kristopher Bedka↗