An Assessment of the Sage III/ISS Temperature and Pressure Research Products
Explore the source record for details and available documents.
SAGE III/ISS↗
Engineering topics
Michael Pitts
Publications and source records attributed to Michael Pitts.
Cloud - Aerosol LIDAR Infrared Pathfinder Satellite Observations (CALIPSO) - Data Management System: Data Products Catalog V4.95
The CALIPSO V4.51 Lidar Level 1 and Level 2 data product is an updated version of an already order-able dataset. The changes were signed off by the CALIPSO Configuration Control Board, versioned, and the code uploaded to a code repository. There is no ITAR/SBU data or code associated with this product. Data will be publicly order-able at the NASA LaRC Atmospheric Sciences Data Center (ASDC). All documentation and web sites will be made public once the data product is released. The data is in HDF4 format and will be generated for majority of the mission (June 2006 - August 2023). The attached Data Products Catalog (v4.95) describes the content of these new data products.
Mark Vaughan↗
2021 Antarctic Ozone Hole [in “State of the Climate in 2021"]
The 2021 Antarctic ozone hole was the 13th largest in 42 years of satellite observations since 1979, with an area of 23.34 × 106 km 2 (the average area for 7 September–13 October) and a minimum daily total ozone column of 92 DU. The 2021 polar stratospheric vortex was stable with consistently cold temperatures that created favorable conditions for ozone depletion. The meteorological conditions and seasonal development of the ozone hole in 2021 were similar to those in 2020. Weaker-than-usual amplitudes of planetary scale Rossby waves in the September–October period helped maintain a strong vortex and led to below-average Antarctic ozone columns in late austral spring and early summer.
Natalya A Kramarova↗
Cloud Aerosol LIDAR Infrared Pathfinder Satellite Observations (CALIPSO) - Data Management - Data Products Catalog V4.94
The CALIPSO V2.00 Lidar Level 2 Polar Stratospheric Cloud data product is an updated version of an already order-able dat set. The changes were signed off by the CALIPSO Configuration Control Board, versioned, and the code uploaded to a code repository. There is no ITAR/SBU data or code associated with this product. Data will be publicly order-able at the NASA LaRC Atmospheric Sciences Data Center (ASDC). All documentation and web sites will be made public once the data product is released. The data is in HDF4 format and will be generated for majority of the mission (June 2006 - March 2021). The attached Data Products Catalog (v4.94) describes this new product in section 2.14, pp 115- 119.
Mark Vaughan↗
TPSAS-NF1676L-29194-DND
The Stratospheric Aerosol and Gas Experiment (SAGE) III instrument was deployed on the International Space Station (ISS) in early March 2017. SAGE III/ISS is the latest in the NASA lineage of solar occultation satellite instruments designed to monitor the vertical distribution of aerosol, ozone and other trace gases in the upper atmosphere. Originally built in the early 2000s, the SAGE III/ISS instrument required extensive testing and refurbishment prior to deliver to ISS, including the replacement of the neutral density filter that has been associated with some instrument response issues during the METEOR/3M mission. In particular, METEOR/3M measurements of the oxygen A-band absorption feature near 762 nm that were to be utilized to retrieve profiles of temperature and pressure were adversely affected by this instrument issue. Preliminary examination of the SAGE III/ISS oxygen A-band spectra indicate that the measurements are of higher fidelity than from the METEOR/3M instrument, which may permit successful retrieval of science quality temperature and pressure products. In this paper, we will provide an overview of the temperature and pressure retrieval algorithm, present preliminary analyses of the SAGE III/ISS oxygen A-band measurements, and an initial assessment of the quality of the temperature and pressure retrievals.
Michael Pitts↗
New insights into PSCs from the nearly 17-year CALIPSO data record
Polar stratospheric clouds (PSCs) play important roles in stratospheric ozone depletion during winter and spring at high latitudes (e.g., the Antarctic ozone hole). PSC particles provide sites for heterogeneous reactions that convert stable chlorine reservoir species to radicals that destroy ozone catalytically. PSCs also prolong ozone depletion by delaying chlorine deactivation through the removal of gas-phase HNO3 and H2O by sedimentation of large nitric acid trihydrate (NAT) and ice particles. A more complete picture of PSC processes on vortex-wide scales has emerged from the CALIOP (Cloud-Aerosol Lidar with Orthogonal Polarization) instrument on the CALIPSO satellite that has been observing PSCs at latitudes up to 82 degrees in both hemispheres since June 2006. This nearly 17-year data record has fundamentally improved our knowledge of PSC spatial and temporal distributions, composition, and formation processes. In this presentation, we provide a brief overview of the CALIOP PSC data record and highlight some of the recent advances in our understanding of PSC processes.
polar stratospheric clouds↗
Improved Characterization of PSC Processes Derived from a Third-Generation CALIOP and MLS Detection and Composition Classification Algorithm
The new 3-year CloudSat and CALIPSO Science Team project described in this poster will use a unique combination of data from the Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) instrument on CALIPSO and the Microwave Limb Sounder (MLS) on Aura, in conjunction with supporting meteorological information and detailed modeling studies, to advance our understanding of polar stratospheric cloud (PSC) processes and their role in ozone depletion. We will develop a third-generation (Gen3) PSC detection and composition algorithm that incorporates a new, more robust two-dimensional, multi-channel CALIOP feature detection scheme (2D-McDA). We will also devise and implement an improved two-dimensional PSC composition classification scheme that utilizes multiple parameters (e.g., CALIOP 532-nm parallel and perpendicular scattering ratios, CALIOP 1064-nm total scattering ratio, MLS HNO3 and H2O, ambient temperature, and temperature histories) in a Bayesian approach to determine the most likely PSC composition and help constrain solid PSC particle number density and size/shape. The combined CALIOP/MLS analyses will allow us to study in detail the full life cycle of PSCs and their resulting impact on gas-phase HNO3 and H2O, which should lead to improved parameterizations of PSC microphysics in global CCMs where detailed particle information is not available. The Gen3 CALIOP PSC algorithm will be a natural stepping-stone toward the analysis of data collected during future spaceborne lidar missions, such as NASA’s Atmosphere Observation System (AtmOS) mission currently scheduled for launch late in this decade. We will also investigate possible trends in PSC occurrence and composition over the entire CALIOP data record and through further comparisons with the Stratospheric Aerosol Measurement (SAM) II solar occultation PSC record from 1979-1989. Finally, we will validate the mountain-wave parameterization and PSC schemes used in the UM-UKCA (Unified Model coupled to the United Kingdom Chemistry and Aerosol module) chemistry-climate model through detailed comparisons with earlier CALIOP PSC data products and those developed under this proposal.
CALIPSO↗
Improved Characterization of PSC Processes Derived from a Third-Generation CALIOP and MLS Detection and Composition Classification Algorithm
The new 3-year CloudSat and CALIPSO Science Team project described in this poster will use a unique combination of data from the Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) instrument on CALIPSO and the Microwave Limb Sounder (MLS) on Aura, in conjunction with supporting meteorological information and detailed modeling studies, to advance our understanding of polar stratospheric cloud (PSC) processes and their role in ozone depletion. We will develop a third-generation (Gen3) PSC detection and composition algorithm that incorporates a new, more robust two-dimensional, multi-channel CALIOP feature detection scheme (2D-McDA). We will also devise and implement an improved two-dimensional PSC composition classification scheme that utilizes multiple parameters (e.g., CALIOP 532-nm parallel and perpendicular scattering ratios, CALIOP 1064-nm total scattering ratio, MLS HNO3 and H2O, ambient temperature, and temperature histories) in a Bayesian approach to determine the most likely PSC composition and help constrain solid PSC particle number density and size/shape. The combined CALIOP/MLS analyses will allow us to study in detail the full life cycle of PSCs and their resulting impact on gas-phase HNO3 and H2O, which should lead to improved parameterizations of PSC microphysics in global chemistry-climate models (CCMs) where detailed particle information is not available. The Gen3 CALIOP PSC algorithm will be a natural stepping-stone toward the analysis of data collected during future spaceborne lidar missions, such as NASA’s Atmosphere Observation System (AOS) mission currently scheduled for launch late in this decade. We will also investigate possible trends in PSC occurrence and composition over the entire CALIOP data record and through further comparisons with the Stratospheric Aerosol Measurement (SAM) II solar occultation PSC record from 1979-1989. Finally, we will validate the mountain-wave parameterization and PSC schemes used in the UM-UKCA (Unified Model coupled to the United Kingdom Chemistry and Aerosol module) CCM through detailed comparisons with earlier CALIOP PSC data products and those developed under this proposal.
CALIPSO↗
Status of Oxygen A-Band Temperature/Pressure Research Products
Explore the source record for details and available documents.
SAGE III/ISS↗
Updated PSC Climatology Based on Caliop Measurements From 2006-2023
After more than three decades of research, the roles of polar stratospheric clouds (PSCs) in stratospheric ozone depletion are well established. Heterogeneous reactions on PSCs convert the stable chlorine reservoirs HCl and ClONO2 to chlorine radicals that destroy ozone catalytically. PSCs also prolong ozone depletion by delaying chlorine deactivation through the removal of gas-phase HNO3 and H2O by sedimentation of large nitric acid trihydrate (NAT) and ice particles. A substantial recovery of the ozone layer is expected by the middle of this century with reduced global production of ozone depleting substances in accordance with the Montreal Protocol and subsequent amendments. But as climate changes, leading to a colder and perhaps wetter stratosphere and upper troposphere, reliable model predictions of recovery of the Antarctic ozone hole and of potentially more severe ozone depletion in the Arctic are challenging. This is due both to a lack of detailed understanding of the underlying physics and the fact that many global models use simple parameterizations that do not accurately represent PSC processes. A more complete picture of PSC processes on vortex-wide scales has emerged from the CALIOP (Cloud-Aerosol Lidar with Orthogonal Polarization) instrument on the CALIPSO satellite that has been observing PSCs at latitudes up to 82 degrees in both hemispheres since June 2006. The CALIOP Version 2.0 (v2) PSC algorithm was recently developed to address known deficiencies in previous algorithms and includes additional refinements to increase the robustness of the inferred PSC composition. In this paper, we present an updated PSC reference data record and comprehensive climatology constructed by applying the v2 algorithm to the more than 17-year CALIOP spaceborne lidar dataset. In addition, we will examine the potential impact of aerosol and water vapor injections into the stratosphere from the January 2022 Hunga Tonga eruption on PSC occurrence in both the Arctic and Antarctic regions.
polar stratospheric clouds↗
SAGE III/ISS v5.3 Level 2 Data Product Changes and Improvements
The Stratospheric Aerosol and Gas Experiment on the International Space Station (SAGE III/ISS) is an occultation instrument that acquires measurements of aerosols and gases within the Earth’s stratosphere and upper troposphere. SAGE III/ISS provides level 2 solar species products for aerosol extinction (9 channels), nitrogen dioxide (NO2), ozone (O3), and water vapor (H2O). The level 2 products currently provide three O3 profiles based on differing retrievals. The first O3 profile is based on measurements at short wavelengths within the Hartley-Huggins band (MesO3), the second O3 profile is based on measurements made at visible wavelengths within the Chappius band (MLR O3), and the final profile is found using a more SAGE II like approach (AO3). The SAGE III/ISS also provides level 2 lunar species products for ozone (O3), nitrogen dioxide (NO2), and nitrogen trioxide (NO3). Version 5.3 of the SAGE III/ISS retrieval algorithm introduces improvements that affect the level 2 data products. The largest change to the solar algorithm is the implementation of disturbance monitoring package (DMP) corrections to improve pointing accuracy. The DMP is comprised of a miniature inertial measurement unit that measures rotation in inertial space using ring laser gyroscopes oriented about three orthogonal axes which can be used to correct pointing errors caused by mechanical disturbances. A major change common to solar and lunar algorithms is meteorological input from the coarser 42 level Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) model data to the 72 level MERRA-2 model data. The final major change involves improving the automated quality assurance (QA) algorithm to recover events that were withheld from the public release because differences between the AO3 and MLR O3 for some events after the eruption of Tonga–Hunga Haʻapai. Other changes for v5.3 include minor bug fixes as well as restoration of some data quality flags that were removed in v5.21. This presentation presents the impacts of these changes as well as overall observations of interest from v5.3 level 2 data products.
Carter Hulsey↗
SAGE III/ISS v5.3 Level 2 Data Product Changes and Improvements
The Stratospheric Aerosol and Gas Experiment on the International Space Station (SAGE III/ISS) is an occultation instrument that acquires measurements of aerosols and gases within the Earth’s stratosphere and upper troposphere. SAGE III/ISS provides level 2 solar species products for aerosol extinction (9 channels), nitrogen dioxide (NO2), ozone (O3), and water vapor (H2O). The level 2 products currently provide three O3 profiles based on differing retrievals. The first O3 profile is based on measurements at short wavelengths within the Hartley-Huggins band (MesO3), the second O3 profile is based on measurements made at visible wavelengths within the Chappius band (MLR O3), and the final profile is found using a more SAGE II like approach (AO3). The SAGE III/ISS also provides level 2 lunar species products for ozone (O3), nitrogen dioxide (NO2), and nitrogen trioxide (NO3). Version 5.3 of the SAGE III/ISS retrieval algorithm introduces improvements that affect the level 2 data products. The largest change to the solar algorithm is the implementation of disturbance monitoring package (DMP) corrections to improve pointing accuracy. The DMP is comprised of a miniature inertial measurement unit that measures rotation in inertial space using ring laser gyroscopes oriented about three orthogonal axes which can be used to correct pointing errors caused by mechanical disturbances. A major change common to solar and lunar algorithms is meteorological input from the coarser 42 level Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) model data to the 72 level MERRA-2 model data. The final major change involves improving the automated quality assurance (QA) algorithm to recover events that were withheld from the public release because differences between the AO3 and MLR O3 for some events after the eruption of Tonga–Hunga Haʻapai. Other changes for v5.3 include minor bug fixes as well as restoration of some data quality flags that were removed in v5.21. This presentation presents the impacts of these changes as well as overall observations of interest from v5.3 level 2 data products.
Carter Hulsey↗
Update on SAGE III/ISS Temperature and Pressure Research Products
Explore the source record for details and available documents.
SAGE III/ISS↗
A Golden Era of PSC Observations From the A-Train By CALIOP and MLS
The fundamental role of polar stratospheric clouds (PSCs) in the depletion of stratospheric ozone is well established. Heterogeneous reactions on PSCs convert the stable chlorine reservoirs HCl and ClONO2 to chlorine radicals that destroy ozone catalytically. PSCs also prolong ozone depletion by delaying chlorine deactivation through the removal of gas-phase HNO3 and H2O by sedimentation of large PSC particles. There has been substantial recent progress in our understanding of PSC processes due to the long-term, vortex-wide observations from the CALIOP (Cloud-Aerosol Lidar with Orthogonal Polarization) lidar on the CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations) satellite and the MLS (Microwave Limb Sounder) on the Aura satellite. The CALIOP observations provide unprecedented high spatial resolution information on particulate aerosol/PSC morphology and composition, while MLS provides complementary collocated measurements of gas-phase HNO3 and H2O, the major constituents of all PSC particles. The combined analyses of these datasets have enabled better PSC composition discrimination and provided valuable new insight into PSC formation processes and particle growth kinetics. The more than 17 years of CALIOP and MLS data have uniquely captured the primary aspects of the seasonal and multi-year variability of PSCs in the Arctic and Antarctic, enabling the development of a state-of-the-art reference PSC data record and climatology. In this presentation, we highlight the significant advances in our understanding achieved during this golden era of spaceborne PSC observations and identify remaining gaps in our knowledge that future spaceborne lidar missions may help resolve.
polar stratospheric clouds↗