Search NASA⌕ Search

Engineering topics

Michael Wilder

Publications and source records attributed to Michael Wilder.

NASA Ames Thermophysics Ground Test Facilities Supporting Future Planetary Atmospheric Entry

A review of the current facility capabilities for testing Thermal Protection Systems and quantifying their entry environments at NASA Ames Research Center is presented based on the expected targets of interest to the Planetary Science and Astrobiology communities. While the operational capabilities of these facilities are generally considered sufficient for supporting future missions to targets of interest, expanded ground test capabilities such as larger sample sizes, flight-relevant gas mixtures, dusty environments, and flight-relevant shear/pressure combinations would reduce future entry vehicle design uncertainties and applied margins. These reduced uncertainties may translate into reduced entry vehicle masses, increased robustness, and decreased operational risks during entry phases for science missions. Expanded ground test capabilities would also offer the ability to study material failure modes in environments even more representative of flight than are currently achievable. A list of desired future test capabilities is presented along with suggestions of possible methods of achieving each. The main recommendation of this paper is the undertaking of a detailed study of the benefits and associated costs of each of these expanded capabilities to determine the best future path.

arc jet↗

The Adaptable, Deployable, Entry and Placement Technology (ADEPT) Enabling Advanced Entry, Descent, and Landing Capabilities for SmallSat Missions

The Adaptable, Deployable Entry and Placement Technology (ADEPT) is a mechanically deployable low-ballistic coefficient aeroshell entry system which performs entry, descent, and landing (EDL) functions for a broad range of planetary destinations including Mars, Venus, Titan and Earth. The deployable system allows mission planners to develop an aeroshell design that is stowed like a folded umbrella, and yet prior to the EDL mission segment, transforms into a deployed, near-rigid low ballistic coefficient configuration. The ADEPT architecture is scalable from a sub-1m class to 6m diameter entry vehicles for Venus and and it has been studied at up to 15m – 20m scale for human exploration class missions. There has been growing interest in performing interplanetary missions with small spacecraft as secondary payloads and ADEPT offers small satellite mission designers the ability to consider Aeroassist technologies to expand mission applications. The ADEPT architecture introduces a new approach for entry vehicle design. It deploys a flexible 3D woven carbon fabric as the primary drag surface. It is capable of surviving high aerothermal heating during entry, while maintaining a robust impermeable membrane that provides high drag for vehicle deceleration. The ADEPT project team has advanced this decelerator technology via systems-level testing at the one meter diameter (nano-ADEPT) scale. A subsonic aeroloads test (May 2015) and a pathfinder arc-jet aeroheating test (Sept 2015) and a successful sounding rocket flight (SR-1) launch of a 0.7 meter deployed diameter ADEPT (September 2018). The SR-1 flight experiment demonstrated most of the primary end-to-end mission stages including: launch in a stowed configuration, separation and deployment in zero-g, exo-atmospheric conditions, and passive ballistic re-entry of a 70 degree half-angle cone geometry. The ADEPT SR-1 sounding rocket flight experiment had to address challenges such as stowing within the constrained payload envelope, fabric folding, and packaging concerns.

Paul Wercinski↗