Search NASA⌕ Search

Engineering topics

Michel, P

Publications and source records attributed to Michel, P.

66 records · Page 4

Measurements of the critical power for self-injection of electrons in a laser wakefield accelerator

A laser wakefield acceleration study has been performed in the matched, self-guided, blow-out regime where a 10 J, 60 fs laser produced 720 {+-} 50 MeV quasi-monoenergetic electrons with a divergence of {Delta}{theta} = 2.85 {+-} 0.15 mRad. While maintaining a nearly constant plasma density (3 x 10{sup 18} cm{sup -3}), a linear electron energy gain was measured from 100 MeV to 700 MeV when the plasma length was scaled from 3 mm to 8 mm. Absolute charge measurements indicate that self-injection occurs when P/P{sub cr} > 4 and saturates around 100 pC for P/P{sub cr} > 12. The results are compared with both analytical scalings and full 3D particle-in-cell simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

PREPARATIONS FOR ASSEMBLY OF THE INTERNATIONAL ERL CRYOMODULE AT DARESBURY LABORATORY

The collaborative development of an optimised cavity/cryomodule solution for application on ERL facilities has now progressed to final assembly and testing of the cavity string components and their subsequent cryomodule integration. This paper outlines the verification of the various cryomodule sub-components and details the processes utilised forfinal cavity string integration. The paper also describes the modifications needed to facilitate this new cryomodule installation and ultimate operation on the ALICE facility at Daresbury Laboratory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Energy transfer between laser beams crossing in ignition hohlraums

The full scale modeling of power transfer between laser beams crossing in plasmas is presented. A new model was developed, allowing calculations of the propagation and coupling of pairs of laser beams with their associated plasma wave in three dimensions. The complete set of laser beam smoothing techniques used in ignition experiments is modeled and their effects on crossed-beam energy transfer are investigated. A shift in wavelength between the beams can move the instability in or out of resonance and hence allows tuning of the energy transfer. The effects of energy transfer on the effective beam pointing and on symmetry have been investigated. Several ignition designs have been analyzed and compared, indicating that a wavelength shift of up to 2 A between cones of beams should be sufficient to control energy transfer in ignition experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of x-ray radiation from a laser wakefield accelerator

A Laser Wakefield Accelerator (LWFA) is under development at Lawrence Livermore National Laboratory (LLNL) to produce electron bunches with GeV class energy and energy spreads of a few-percent. The interaction of a high power (200 TW), short pulse (50 fs) laser with neutral He gas can generate quasi-monoenergetic electron beams at energies up to 1 GeV [1]. The laser pulse can be self-guided over 1 cm overcoming the limitation of vacuum diffraction. X-ray betatron radiation is emitted while the accelerated electrons undergo oscillations in the wakefield electrostatic field. Here we present electron spectra measurements with a two screen spectrometer allowing to measure both the electron energy and the transverse deflection at the plasma exit. We have measured monoenergetic electron beams above 300 MeV. Furthermore a forward directed x-ray beam is observed. Preliminary measurements of the spectrum are in reasonable agreement with the calculated betatron spectrum in the synchrotron asymptotic limit using the measured electron beam parameters.

43 PARTICLE ACCELERATORS↗

Tuning the Implosion Symmetry of ICF Targets via Controlled Crossed-Beam Energy Transfer

Radiative hydrodynamics simulations of ignition experiments show that energy transfer between crossing laser beams allows tuning of the implosion symmetry. A new full-scale, three-dimensional quantitative model has been developed for crossed-beam energy transfer, allowing calculations of the propagation and coupling of multiple laser beams and their associated plasma waves in ignition hohlraums. This model has been implemented in a radiative-hydrodynamics code, demonstrating control of the implosion symmetry by a wavelength separation between cones of laser beams.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radiation Sensitivity of Natural Organic Matter: Clay Mineral Association Effects in the Callovo-Oxfordian Argillite

Clay-rich low-organic carbon formations (e.g., Callovo-Oxfordian argillite in France and Opalinus Clay in Switzerland) are considered as host rocks for radioactive waste disposal. The clay-organic carbon has a strong impact on the chemical stability of the clays. For this reason, the nature of the clay-organic carbon, the release of hydrophilic organic compounds, namely, humic (HA) and fulvic acids (FA) and the radiation sensitivity of the undisturbed host rock organics was investigated. The clay sample originates from Oxfordian argillite (447 m depth, borehole EST 104). HA and FA were extracted following the standard International Humic Substance Society (IHSS) isolation procedure. Synchrotron based (C-, K-, Ca-, O- and Fe-edge XANES) scanning transmission X-ray microscopy (STXM) and FT-IR microspectroscopy was used to identify under high spatial resolution the distribution of clay-organic matter with different functionality using principal component and cluster analysis. The results show that in this old (Jurassic) geological formation, small parts of the organic inventory (1-5%) keeps the structure/functionality and can be mobilized as hydrophilic humic substance type material (HA and FA). Target spectra analysis shows best correlation for isolated humic acids with organics found in smectite-rich regions, whereas the extractable FA has better spectral similarities with the illite mixed layer minerals (MLM) regions. After radiation of 1.7 GGy under helium atmosphere the same rock sample area was investigated for radiation damage. Radiation damage in the smectite and illite-MLM associated organic matter is comparably low with 20-30% total oxygen mass loss and 13-18% total carbon mass loss. A critical dose dc of 2.5 GGy and a optical density after infinite radiation (OD?) of 54% was calculated under room temperature conditions. C(1s) XANES show a clear increase in Cdouble bond; length as m-dashC bonds especially in the illite-MLM associated organics. This results suggests a combination of the formation of Cdouble bond; length as m-dashC bond due to crosslinking via polymerization and mass loss due to bond breaking (scissioning) in the main chain or in side groups of the organic macromolecules upon irradiation.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Energy transfer between laser beams crossing in ignition hohlraums

The full scale modeling of power transfer between laser beams crossing in plasmas is presented. A new model was developed, allowing calculation of the propagation and coupling of pairs of laser beams with their associated plasma wave in three dimensions. The full laser beam smoothing techniques used in ignition experiments are modeled, and their effects on crossed-beam energy transfer is investigated. A shift in wavelength between the beams can move the instability off resonance and reduce the transfer, hence preserving the symmetry of the capsule implosion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tuning the implosion symmetry of ICF targets via controlled crossed-beam energy transfer

Radiative hydrodynamics simulations of ignition experiments show that energy transfer between crossing laser beams allows tuning of the implosion symmetry. A new full-scale, three dimensional quantitative model has been developed for crossed-beam energy transfer, allowing calculations of the propagation and coupling of multiple laser beams and their associated plasma waves in ignition hohlraums. This model has been implemented in a radiative-hydrodynamics code, demonstrating control of the implosion symmetry by a wavelength separation between cones of laser beams.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ULTRA-SHORT X-RAY RADIATION COMING FROM A LASER WAKEFIELD ACCELERATOR

A Laser Wakefield Accelerator (LWFA) is under development at Lawrence Livermore National Laboratory (LLNL) to produce electron bunches with GeV class energy and energy spreads of a few-percent. The ultimate goal is to provide a bright and compact photon source for high energy density physics. The interaction of a high power (200 TW), short pulse (50 fs) laser with neutral He gas can generate quasi-monoenergetic electrons beams at energies up to 1 GeV [1]. The laser pulse can be self-guided over a dephasing length of 1 cm (for a plasma density of 1.5 x 10{sup 18} cm{sup -3}) overcoming the limitation of vacuum diffraction. Betatron radiation is emitted while the accelerated electrons undergo oscillations in the wakefield electrostatic field. Here we present electron spectrum measurements with a two screen spectrometer allowing to fix the ambiguities due to unknown angle at the plasma exit. We have measured monoenergetic electron beams at energies around 110 MeV. Furthermore a forward directed x-ray beam is observed. The peak energy of the measured synchrotron spectrum is reconstructed based on the energy deposited after different sets of filters, assuming x-ray radiation described in the synchrotron asymptotic limit (SAL) and is found around 6 keV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Three-dimensional modeling of laser-plasma interaction: Benchmarking our predictive modeling tools versus experiments

New experimental capabilities [Froula et al., Phys. Rev. Lett. 98, 085001 (2007)] have been developed to study laser-plasma interaction (LPI) in ignition-relevant condition at the Omega laser facility (LLE/Rochester). By shooting an interaction beam along the axis of a gas-filled hohlraum heated by up to 17 kJ of heater beam energy, a millimeter-scale underdense uniform plasma at electron temperatures above 3 keV was created. Extensive Thomson scattering measurements allowed to benchmark hydrodynamic simulations performed with HYDRA [Meezan et al., Phys. Plasmas 14, 056304 (2007)]. As a result of this effort, these simulations can be used with much confidence as input parameters for the LPI simulation code PF3D [Berger et al., Phys. Plasmas 5, 4337 (1998)]. In this paper, it is shown that by using accurate hydrodynamic profiles and full three-dimensional simulations including a realistic modeling of the laser intensity pattern generated by various smoothing options, whole beam three-dimensional linear kinetic modeling of stimulated Brillouin scattering (SBS) reproduces quantitatively the experimental measurements (SBS thresholds, reflectivity values, and the absence of measurable stimulated Raman scattering). This good agreement was made possible by the recent increase in computing power routinely available for such simulations. These simulations accurately predicted the strong reduction of SBS measured when polarization smoothing is used.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetically Controlled Plasma Waveguide For Laser Wakefield Acceleration

An external magnetic field applied to a laser plasma is shown produce a plasma channel at densities relevant to creating GeV monoenergetic electrons through laser wakefield acceleration. Furthermore, the magnetic field also provides a pressure to help shape the channel to match the guiding conditions of an incident laser beam. Measured density channels suitable for guiding relativistic short-pulse laser beams are presented with a minimum density of 5 x 10{sup 17} cm{sup -3} which corresponds to a linear dephasing length of several centimeters suitable for multi-GeV electron acceleration. The experimental setup at the Jupiter Laser Facility, Lawrence Livermore National Laboratory, where a 1-ns, 150 J 1054 nm laser will produce a magnetically controlled channel to guide a < 75 fs, 10 J short-pulse laser beam through 5-cm of 5 x 10{sup 17} cm{sup -3} plasma is presented. Calculations presented show that electrons can be accelerated to 3 GeV with this system. Three-dimensional resistive magneto-hydrodynamic simulations are used to design the laser and plasma parameters and quasi-static kinetic simulations indicate that the channel will guide a 200 TW laser beam over 5-cm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗