Search NASA⌕ Search

Engineering topics

Miftakhutdinov, D R

Publications and source records attributed to Miftakhutdinov, D R.

Catastrophic optical degradation of the output facet of high-power single-transverse-mode diode lasers. 2. Calculation of the spatial temperature distribution and threshold of the catastrophic optical degradation

The temperature distribution and the power threshold during the catastrophic optical degradation are calculated within the framework of the developed model of the COD of the output facet in high-power single-transverse-mode diode lasers. Comparison of the calculation results and the experiment show the model adequacy. The contribution of different physical mechanisms into the heating of the laser output facet is analysed. It is shown that the model under study can help to develop the method for predicting the laser lifetime by the accelerated ageing tests. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Catastrophic optical degradation of the output facet of high-power single-transverse-mode diode lasers. 1. Physical model

The physical model of catastrophic optical degradation (COD) of the output facet of high-power single- transverse-mode diode lasers is developed. The model excels other models both in completeness of the physical analysis of the processes leading to COD and in allowance for design feature of lasers used to increase the COD threshold - protective coating of the output facet and current limitations near it. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Diode-array-pumped repetitively pulsed neodymium phosphate glass laser

Repetitively pulsed generation (200 {mu}s, 40 Hz) was obtained in a neodymium phosphate glass laser pumped by a 870-nm diode array. The maximum slope lasing efficiency with respect to the optical pump energy equal to 13% is restricted by the factor ({approx}0.23) of active-medium filling by the mode field. By adjusting the laser cavity, the single-transverse mode regime, in particular, the generation of the TEM{sub 00} mode is obtained in the entire range of pump energies. (active media. lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modes of a semiconductor rectangular microcavity

The mode parameters of a rectangular cavity of a semiconductor laser emitting in the range from 850 to 880 nm are numerically calculated and analysed. Nearly quadratic microcavities with a side of length {approx}10 {mu}m are considered. It is shown that, unlike a Fabry-Perot cavity, a rectangular cavity has a much more dense system of nonequidistant modes, which in principle cannot be interpreted as modes of an 'efficient' Fabry-Perot cavity or a ring cavity. The maximum Q factor of modes in the cavities under study can exceed 10{sup 5}, which corresponds to the reduced intracavity loss {approx}3 cm{sup -1}. The radiation field of the cavity can be interpreted as the field of four coherent sources located at the cavity corners. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗