Search NASA⌕ Search

Engineering topics

Mike Baysinger

Publications and source records attributed to Mike Baysinger.

Development of a Surface Water Transportation System for ISRU Operations on Mars

NASA is working to define the architecture needed for a Mars exploration campaign. Initial analysis assumptions allow for pre-deployment of essential cargo and equipment to support a crew landing, including the pre-positioning of a Mars Ascent Vehicle (MAV). This MAV is likely to represent the largest single payload that must be landed on the Mars surface. Its size would be influenced by the amount of mass that state-of-the-art Entry, Descent, and Landing (EDL) systems would be capable of placing on Mars. One possible method of increasing the usable size of the MAV without exceeding available EDL capabilities is to land the MAV without ascent propellant on board. Following such a method may necessitate a strategy to acquire sufficient ascent propellant to allow a crew to safely depart the Martian surface. This paper describes a conceptual return propellant strategy that uses a liquid transportation skid, or pallet, to be used in conjunction with a rover mobility system to transfer water across the Martian surface from a source point to an in-situ resource utilization (ISRU) plant that would use this water as a feedstock to generate oxygen and methane to enable launch of the MAV. Design considerations, concept of operations, and rover energetics will be discussed in this paper.

Fluid Structure Interface↗

Habitable-zone Exoplanet Observatory (HabEx) Baseline 4-m Telescope Design and Predicted Performance

The Habitable Exoplanet Observatory Mission (HabEx) is one of four missions under study for the 2020 Astrophysics Decadal Survey. Its goal is to directly image and spectroscopically characterize planets in the habitable zone around nearby sun-like stars. Additionally, HabEx will perform a broad range of general astrophysics science enabled by 115 to 1700 nm spectral range and 3x3 arc-minute FOV instruments. Critical to achieving its science goals is a large, ultra-stable UV/Optical/Near-IR (UVOIR) telescope. The baseline HabEx telescope is a 4-meter off-axis unobscured three-mirror-anastigmatic, diffraction limited at 400 nm with wavefront stability on the order of a few 10s of picometers. This paper summarizes the opto-mechanical design of the HabEx baseline optical telescope assembly, including a discussion of how science requirements drive the telescope’s specifications, and presents analysis that the baseline telescope structure meets its specified tolerances.

HabEx↗

A High Inclination Solar Mission Enabled by Near-Term Solar Sail Propulsion

Our current understanding of the Sun, its atmosphere, and the heliosphere is severely limited by a lack of good observations of the Sun’s polar regions. A High Inclination Solar Mission (HISM) mission would go into a 0.48-AU circular solar orbit with at least a 60° inclination to conduct long-term observations of the Sun’s poles using both situ and remote-sensing instruments to study the connections between the Sun, the solar wind, and solar energetic particle events. The propulsion requirements to implement HISM are beyond the capability of conventional chemical propulsion and extremely challenging even for highly efficient solar electric propulsion. To enable HISM and a host of other propulsion-intense space science missions, NASA is actively developing solar sail propulsion, capable of continuous low thrust for the extended periods of time required to meet the delta V requirements of HISM. Upcoming solar sail missions include the Near Earth Asteroid (NEA) Scout (2021 planned launch) and Solar Cruiser (candidate for flight in 2024).Solar sails use sunlight to propel vehicles through space by reflecting solar photons from a large, highly-reflective sail. This continuous photon pressure provides propellantless thrust, allowing for very high delta V maneuvers on long-duration, deep-space exploration. Since the Sun supplies the necessary propulsive energy, solar sails require no onboard propellant, thereby potentially increasing useful payload mass. The NASA MSFC Advanced Concepts Office recently completed a detailed mission concept study of HISM based on the solar sail propulsion technologies being developed for NEA Scout and Solar Cruiser. The HISM spacecraft concept envisions carrying a Doppler & Stokes Imager, a coronagraph, magnetometer, Faraday Cup, a plasma spectrometer, and a radio and plasma wave package to meet the science objectives established for a solar polar orbiting mission in the Heliophysics Decadal Survey. This paper will describe the mission concept and its solar sail propulsion system

Solar Sail↗

A Non-Nuclear, Solar Powered Mission to Uranus Utilizing the PowerSail - a Large Solar Sail with Embedded Solar Cells

Powering missions to the outer solar system is a significant challenge. These missions are typically powered by a Radioisotope Thermoelectric Generator (RTG). Though these sources provide stable power regardless of location in space, they are expensive to produce, difficult to integrate, and have both safety concerns as well as negative sociopolitical connotations. Perhaps most importantly, the availability of their fuel, plutonium-238, is scarce. Solar power is often considered a more attractive option. However, photovoltaic generation falls off at the distance from the sun squared. This drives the size of traditional solar generators to infeasible levels for deep space and their utilization at locations deeper the Jupiter is currently non-existent. Herein, a hypothetical solution, the PowerSail, and its application to a non-nuclear Uranus mission is presented. The PowerSail is a marriage of solar sails and thin-film solar cell assemblies. Herein the application of PowerSail spacecraft to a high priority science mission, the Applied Physics Laboratory’s Uranus Probe and Explorer, is studied. The overall mission design along with key subsystems design changes are discussed, ultimately showing that a PowerSail could be utilized as a non-nuclear option to reach destinations very deep in our solar system. Key needed technology developments to make the PowerSail and such a mission a reality are given.

John A. Carr↗

The HEROIX Broadband X-Ray Space Telescope Mission Concept

The High EneRgy Observatory for Imaging X-rays (HEROIX) Medium-Class Mission concept envisions a next-generation broadband X-ray observatory designed to meet the astrophysics community’s need for high-angular-resolution studies of the Cosmic X-ray Background. Building on the science legacy of NASA’s NuSTAR mission and more than 30 years of advances in replicated NiCo shell technology at NASA Marshall, HEROIX proposes a space observatory comprising four co-aligned telescopes achieving 5 arcsecond half-power diameter (HPD) angular resolution. This capability, approached by the resolution demonstrated in the FOXSI-4 sounding rocket mission and under development through the SuperHERO balloon mission, will be extended to energies up to 80 keV through multilayer coatings. Marshall’s inhouse precision optics manufacturing enables an integrated effective area of 380 cm² at 30 keV, which, combined with high-resolution optics, opens new windows into extreme astrophysical non-thermal processes.

Nick Thomas↗