An Exceptional Ambient-Stable Tetragonal Phase in Silver Nanostructures
Abstract not provided
Engineering topics
Publications and source records attributed to Miller, D J.
Abstract not provided
Explore the source record for details and available documents.
In this work, B{sub 4}C particulate-reinforced Al composite was fabricated by a pressureless infiltration technique, and its interfacial microstructure was studied in detail by X-ray diffraction as well as by scanning and transmission electron microscopy. The B{sub 4}C phase was unstable in Al melt during the infiltration process, forming AlB{sub 10}-type AlB{sub 24}C{sub 4} or Al{sub 2.1}B{sub 51}C{sub 8} as a major reactant phase. The Al matrix was large grains (over 10 {micro}m), which had no definite orientation relationships (ORs) with the randomly orientated B{sub 4}C or its reactant particles, except for possible nucleation sites with {l_brace}011{r_brace}{sub B{sub 4}C} almost parallel to {l_brace}111{r_brace}{sub Al} at a deviation angle of 1.5 deg. Both B{sub 4}C-Al and reactant-Al interfaces are semicoherent and free of other phases. A comparison was made with the SiC/Al composite fabricated similarly by the pressureless infiltration. It was suggested that the lack of ORs between the Al matrix and reinforced particles, except for possible nucleation sites, is the common feature of the composites prepared by the infiltration method.
The effect of changing Gd + Y content from 1.2 to 1.6 in the precursor of (Gd,Y)Ba{sub 2}Cu{sub 3}O{sub 7} superconducting thin film tapes made by metal organic chemical vapor deposition (MOCVD) at a constant Gd:Y ratio and a fixed Zr content of 7.5% has been studied. The influence of changing the Gd:Y ratio from Gd = 0 to Y= 0 in 0.2 mol steps at a constant Gd + Y content of 1.2 in the precursor has also been investigated at a fixed Zr content of 7.5%. The critical current of these films is found to vary significantly as a function of rare-earth content as well as a function of rare-earth type. Even for a fixed Zr content, it is found that the critical current in the orientation of magnetic field parallel to the a-b plane and that in the orientation of field perpendicular to the a-b plane can be systematically varied with changing Gd + Y content as well as with changing Gd:Y ratio. The nanoscale defect structures along the a-b plane and along the c-axis are found to be sensitive to these changes in rare-earth content and type.
No abstract prepared.
Mechanical behavior of micron-scale cantilevers with a distributed, flexible proof mass is investigated to understand proof mass size effects on the performance of microelectromechanical system energy harvesters. Single-crystal silicon beams with proof masses of various lengths were fabricated using focused ion beam milling and tested using atomic force microscopy. Comparison of three different modeling results with measured data reveals that a 'two-beam' method has the most accurate predictive capability in terms of both resonant frequency and strain. Accurate strain prediction is essential because energy harvested scales with strain squared and maximum strain will be a design limit in fatigue.
Abstract Not Provided
PTB7 semiconducting copolymer comprising thieno[3,4-b]thiophene and benzodithiophene alternating repeat units set a historic record of solar energy conversion efficiency (7.4%) in polymer/fullerene bulk heterojunction solar cells. To further improve solar cell performance, a thorough understanding of structure-property relationships associated with PTB7/fullerene and related organic photovoltaic (OPV) devices is crucial. Traditionally, OPV active layers are viewed as an interpenetrating network of pure polymers and fullerenes with discrete interfaces. Here we show that the active layer of PTB7/fullerene OPV devices in fact involves hierarchical nanomorphologies ranging from several nanometers of crystallites to tens of nanometers of nanocrystallite aggregates in PTB7-rich and fullerene-rich domains, themselves hundreds of nanometers in size. These hierarchical nanomorphologies are coupled to significantly enhanced exciton dissociation, which consequently contribute to photocurrent, indicating that the nanostructural characteristics at multiple length scales is one of the key factors determining the performance of PTB7 copolymer, and likely most polymer/fullerene systems, in OPV devices.
This study reports on the fabrication of metal-organic chemical vapor deposited (MOCVD) YBa{sub 2}Cu{sub 3}O{sub 6+{delta}} (YBCO) films doped with varying amounts of Ce and Ho and the characterization of their electrical, microstructural, and chemical properties. The films are prepared by vapor phase deposition of a Y-Ba-Cu precursor mix containing controlled amounts of Ce and Ho onto buffered metal strip templates. The comprehensive characterization of these films by critical current measurement, transmission electron microscopy, x-ray diffraction, Raman microspectroscopy, and x-ray absorption spectroscopy provides detailed information about the structure/chemistry/performance relationships and how they vary with varying amounts of Ce and Ho in the YBCO films. The microstructure exhibited by both the Ce-doped and the Ho-doped films contains a high density of crystal basal-plane aligned, fluoritelike precipitates within the YBCO matrix. For optimally doped samples, the influence of these nanocrystalline phases on the flux pinning properties manifests itself as a significant improvement in the critical current density (J{sub c}) for magnetic field orientations that approach being parallel to the ab planes of the YBCO, while no appreciable change is observed in either self-field J{sub c} or applied-field J{sub c} performance in the vicinity of field orientations parallel to the YBCO c-axis. The Ce is almost exclusively concentrated in the fluoritelike nanoprecipitates, while the Ho incorporates into both the planar arrays of nanoprecipitates and the superconducting matrix, where it substitutes for Y in the YBCO lattice. The present findings for Ce and Ho doping are in interesting contrast with our prior findings for Zr-doped MOCVD films due to the fact that the Zr-doped films exhibit columnar precipitate arrays that produce a substantial improvement in J{sub c} for magnetic field orientations parallel to the YBCO c-axis, while no appreciable change is observed in either self-field or applied-field J{sub c} performance for field orientations parallel to the ab planes. These results suggest that improvement of the in-field J{sub c} of YBCO films over an extended range of field angles could be achieved by doping strategies that simultaneously produce both ab-plane aligned and c-axis aligned precipitate arrays.
Ash particles smaller than 2.5 {micro}m in diameter generated during pulverized coal combustion are difficult to capture and may pose greater harm to the environment and human health than the discharge of larger particles. Recent research efforts on coal ash formation have revealed a middle fine-fragment mode centered around 2 {micro}m. Formation of this middle or fine-fragment mode (FFM) is less well understood compared to larger coarse and smaller ultrafine ash. This study is part of an overall effort aimed at determining the key factors that impact the formation of FFM. This work examined the effects of oxygen-to-fuel stoichiometry (OFS). Pulverized Illinois No.6 bituminous coal was combusted and the ash generated was size segregated in a Dekati low pressure inertial impactor. The mass of each fraction was measured and the ash was analyzed using scanning electron microscopy (SEM) and X-ray microanalysis. The FFM ash types were classified based on the SEM images to evaluate the significant fine-fragment ash formation mechanisms and determine any possible link between stoichiometry and formation mechanism. From the particle size distributions (PSDs), the coarse mode appears unaffected by the change in OFS, however, the OFS 1.05 lowered the fraction of ultrafine ash in relation to the higher OFS settings, and appears to increase the portion of the FFM. An intermediate minimum was found in the FFM at 1.3 {micro}m for the 1.20 and 1.35 OFS tests but was not observed in the 1.05 OFS. SEM analysis also suggests that OFS may contribute to changing formation mechanisms.
It is shown that a weak measurement of a quantum system produces a new state of the quantum system which depends on the prior state, as well as the (uncontrollable) measured position of the pointer variable of the weak-measurement apparatus. The result imposes a constraint on hidden-variable theories which assign a different state to a quantum system than standard quantum mechanics. The constraint means that a crypto-nonlocal hidden-variable theory can be ruled out in a more direct way than previously done.
The International Linear Collider (ILC) and other proposed high energy e{sup +}e{sup -} machines aim to measure with unprecedented precision Standard Model quantities and new, not yet discovered phenomena. One of the main requirements for achieving this goal is a measurement of the incident beam energy with an uncertainty close to 10{sup -4}. This article presents the analysis of data from a prototype energy spectrometer commissioned in 2006-2007 in SLAC's End Station A beamline. The prototype was a 4-magnet chicane equipped with beam position monitors measuring small changes of the beam orbit through the chicane at different beam energies. A single bunch energy resolution close to 5 {center_dot} 10{sup -4} was measured, which is satisfactory for most scenarios. We also report on the operational experience with the chicane-based spectrometer and suggest ways of improving its performance.
A single crystal Al specimen was molded at room temperature with long, rectangular, strip diamond punches. Quantitative molding response curves were obtained at a series of punch widths, ranging from 5 {micro}m to 550 nm. A significant size effect was observed, manifesting itself in terms of significantly increasing characteristic molding pressure as the punch width decreases to 1.5 {micro}m and below. A detailed comparison of the present strip punch molding results was made with Berkovich pyramidal indentation on the same single crystal Al specimen. The comparison reveals distinctly different dependence of the characteristic pressure on corresponding characteristic length. The present results show the feasibility of micro-/nano-scale compression molding as a micro-/nano-fabrication technique, and offer an experimental test case for size-dependent plasticity theories.
O{sub 2} dissociation on Pt(111) has been followed at low and saturation coverage using temperature-programmed x-ray photoelectron spectroscopy and simulated with mean-field kinetic modeling, yielding dissociation (E{sub a}) and desorption (E{sub d}) barriers of 0.32 and 0.36 eV, respectively. Density functional theory calculations show that E{sub a} is strongly influenced by the O-O interatomic potential in the atomic final state: of the supercells considered, that which maximizes attractive third-nearest-neighbor interactions in the atomic final state yields both the lowest computed dissociation barrier (0.24 eV) and the best agreement with experiment. It is proposed that the effect of adsorbate-adsorbate interactions must be considered when modeling catalytic processes involving dissociative steps.
The magnetostrictive atomic strain in a pure Fe single crystal was measured by differential x-ray absorption spectroscopy. The obtained tetragonal magnetostriction constant, (3/2){lambda}{sub 100}, was determined to be 45 ppm, consistent with the previously reported theoretical value calculated from a spin-orbit coupling theory. These results provide a foundation for understanding the origin of magnetostriction in pure Fe as well as Fe-based binary alloys.
S-adenosyl-L-methionine-dependent methyltransferases (MTs) are abundant, and highly conserved across phylogeny. These enzymes use the cofactor AdoMet to methylate a wide variety of molecular targets, thereby modulating important cellular and metabolic activities. Thermotoga maritima protein 0872 (TM0872) belongs to a large sequence family of predicted MTs, ranging phylogenetically from relatively simple bacteria to humans. The genes for many of the bacterial homologs are located within operons involved in cell wall synthesis and cell division. Despite preliminary biochemical studies in E. coli and B. subtilis, the substrate specificity of this group of more than 150 proteins is unknown. As part of the Midwest Center for Structural Genomics initiative (www.mcsg.anl.gov), we have determined the structure of TM0872 in complexes with AdoMet and with S-adenosyl-L-homocysteine (AdoHcy). As predicted, TM0872 has a typical MT domain, and binds endogenous AdoMet, or co-crystallized AdoHcy, in a manner consistent with other known MT structures. In addition, TM0872 has a second domain that is novel among MTs in both its location in the sequence and its structure. The second domain likely acts in substrate recognition and binding, and there is a potential substrate-binding cleft spanning the two domains. This long and narrow cleft is lined with positively charged residues which are located opposite the S{sup +}-CH{sub 3} bond, suggesting that a negatively charged molecule might be targeted for catalysis. However, AdoMet and AdoHcy are both buried, and access to the methyl group would presumably require structural rearrangement. These TM0872 crystal structures offer the first structural glimpses at this phylogenetically conserved sequence family.
The Exceptional Supersymmetric Standard Model (E{sub 6}SSM) provides a low energy alternative to the MSSM, with an extra gauged U(1){sub N} symmetry, solving the mu-problem of the MSSM. Inspired by the possible embedding into an E{sub 6} GUT, the matter content fills three generations of E{sub 6} multiplets, thus predicting exciting exotic matter such as diquarks or leptoquarks. We present predictions from a constrained version of the model (cE{sub 6}SSM), with a universal scalar mass m{sub 0}, trilinear mass A and gaugino mass M{sub 1/2}. We reveal a large volume of the cE{sub 6}SSM parameter space where the correct breakdown of the gauge symmetry is achieved and all experimental constraints satisfied. We predict a hierarchical particle spectrum with heavy scalars and light gauginos, while the new exotic matter can be light or heavy depending on parameters. We present representative cE{sub 6}SSM scenarios, demonstrating that there could be light exotic particles, like leptoquarks and a U(1){sub N} Z' boson, with spectacular signals at the LHC.
We argue that in the two--loop approximation gauge coupling unification in the exceptional supersymmetric standard model (E{sub 6}SSM) can be achieved for any phenomenologically reasonable value of alpha{sub 3}(M{sub Z}) consistent with the experimentally measured central value.