Search NASA⌕ Search

Engineering topics

Miller, Douglas

Publications and source records attributed to Miller, Douglas.

Final Review of FY23 ASC ATDM L2 Milestone, MRT #8541, ATDM Multiphysics Scaling on EAS-3

As displayed in the FY23 ASC Implementation Plan (IP) and the Milestone Reporting Tool (MRT), the milestone description and completion criteria state: Demonstrate the capability to execute mission-relevant calculations with a multiphysics code from the Ristra project at scale on the pre-El Capitan Early Access System 3 (EAS-3). These calculations must use the GPU hardware available on EAS-3, the AMD MI-250s, to achieve any reasonable performance.

97 MATHEMATICS AND COMPUTING↗

Geophysical monitoring using active seismic techniques at the Citronelle Alabama CO 2 storage demonstration site

Between August 2012 and September 2014, about 114,000 metric tonnes of CO 2 was captured from the coal-fired Plant Barry Power Station at Bucks Alabama and injected into the Paluxy Formation above the oil pool in the southeast unit of the Citronelle Oilfield. Various monitoring methods were deployed at land surface and in project wells to measure system performance, comply with permit requirements and test new and innovative monitoring tools. The monitoring program relied heavily on active seismic methods for subsurface imaging of geologic structure and time-lapse seismic techniques to track the CO 2 migration in the injection interval. Both conventional geophone/hydrophone and fiber-optic based Distributed Acoustic Sensing (DAS) arrays were deployed and tested, allowing a side by side comparison of the equipment and techniques. Geophysical imaging of the subsurface was successful using DAS in the offset vertical seismic profile (OVSP) survey configuration. A high resolution OVSP image of the subsurface was obtained in 2014 with DAS, which exceeded project expectations in comparison to a lower resolution image obtained in 2012 using a conventional 80-level geophone array. A time-lapse image of the redistribution of CO 2 after injection ended in September 2014 was obtained with two DAS OVSP surveys from June 2014 and December 2015, thus successfully demonstrating its proof-of-concept. Unfortunately, a pre-injection baseline survey with DAS, which was in its initial stage of technology development in 2012, did not have sufficient quality for use, making it difficult to interpret the acquired DAS time-lapse difference. Additional research in this area has since demonstrated the utility of time-lapse DAS OVSP. DAS data were also acquired during a cross-well seismic survey conducted in 2014. Unfortunately, the DAS technique was not success in the cross-well survey configuration because the system noise level was too high in the crosswell frequency output range (100–1200 Hz) of the piezoelectric source (increasing by a factor of ten compared to VSP frequency band). Additionally, the cross-well geometry causes sub-horizontal (broadside) incidence on the vertical DAS fiber cable, which is known to be problematic. Current research is focused on improving the DAS cable response to broadside acoustic energy. Time-lapse seismic surveys using commercially available conventional arrays were also acquired. In contrast to the DAS acquired data, the cross-well seismic results obtained with the conventional array was highly successful and clearly showed the CO 2 remained in zone at the end of injection. Time-lapse differencing of the OSVP surveys acquired with the conventional arrays proved to be inconclusive. Finally, changes in wellbore conditions between surveys and unavoidable changes in equipment (the array used for the baseline survey was retired) affected data quality, making it difficult to interpret the OVSP results.

58 GEOSCIENCES↗

Distributed Fiber Optic Arrays: Integrated Temperature and Seismic Sensing for Detection of CO 2 Flow, Leakage and Subsurface Distribution (Final Report)

This report describes the seismic and heat-pulse monitoring equipment, surveys, results and accomplishments of the fiber optic (FO) project funded by the U.S. Department of Energy (DOE) under Agreement Number DE-FE0012700. The formal title of the project is “Distributed Fiber Optic Arrays: Integrated Temperature and Seismic Sensing for Detection of CO 2 Flow, Leakage and Subsurface Distribution.” The project focuses on the field acquisition of FO data using Distributed Acoustic Sensing (DAS) arrays for subsurface imaging of geologic structure and to track the CO 2 migration in the injection interval using time-lapse techniques. A second component of the project uses a novel heat-pulse monitoring method that relies on Distributed Temperature Sensing (DTS) to evaluate near-field leakage of CO 2 or brine in and around the wellbore. The Southeast Regional Carbon Sequestration (SECARB) partnership hosted the project at the Anthropogenic Test site near Citronelle, Alabama after the original site host, the Kansas Geological Survey (KGS), experienced significant delays in permitting its CO 2 injection well at the Wellington Oil Field site in Kansas. The KGS project was later terminated in 2017 before an injection permit issued. A second field trial was planned for the Livingston Oil Field, located in Louisiana, but the site host ran into financial troubles and the project was terminated in 2015. A replacement field-site host was not found for the Livingston field trial. Both the Wellington, Kansas and Livingston, Louisiana projects were funded by DOE. A novel sensor platform referred to as the Modular Borehole Monitoring (MBM) system deployed at the Citronelle field site was utilized by the FO project. Two different seismic sensor technologies were incorporated in the Citronelle MBM system design including: (1) a semi-permanent, tubing-deployed, 18-level geophone array with custom hydraulic clamps; and (2) two, single mode optical fibers for Distributed Acoustic Sensing (DAS). Incorporation of the 18-level geophone array in the MBM system provided an ideal opportunity to compare the DAS response to conventional geophones. A heat-pulse monitoring system consisting of two, multi-mode optical fibers for Distributed Temperature Sensing (DTS) and copper heater element were also incorporated into the MBM package. This report provides an overview of the design of the MBM, DAS, and DTS equipment and the surveys performed during the study. The heat-pulse monitoring technique was used to diagnose a completion problem with observation well D-9-8 #2 where the MBM system was installed in 2012, thus successfully demonstrating its application for leak detection. In 2015, CO 2 unexpectedly arrived at the observation well approximately one year after CO 2 injection and heat-pulse monitoring ended. It was determined at this time that saltwater intrusion had likely penetrated the stainless-steel capillary tube containing the fibers and copper heater elements, thus preventing the heater from being used. DTS measurements indicated that the fiber had also degraded probably due to hydrogen darkening. It is recommended that the capillary tube be constructed of a more corrosive resistant material (e.g., Inconel) in the future should it be deployed in similar harsh downhole environments. Geophysical imaging of the subsurface and monitoring of the CO 2 were successful using DAS in the vertical seismic profile (VSP) survey configuration. A high resolution VSP image of the subsurface was obtained in 2014 using DAS, which exceeded our expectations in comparison to a lower resolution image obtained by SECARB in 2012 using an 80-level geophone array. A time-lapse image of the redistribution of CO 2 after injection ended in September 2014 was obtained using two DAS VSP surveys from June 2014 and December 2015, thus successfully demonstrating its application. DAS data were also acquired during a crosswell seismic survey conducted in 2014. Unfortunately, the DAS technique was not success in the crosswell survey configuration because the noise level was too high, increasing by a factor of ten, over the high frequency output (100-1,200) of the piezoelectric source.

58 GEOSCIENCES↗

Mechanism of supporting sub-communicator collectives with o(64) counters as opposed to one counter for each sub-communicator

A system and method for enhancing barrier collective synchronization on a computer system comprises a computer system including a data storage device. The computer system includes a program stored in the data storage device and steps of the program being executed by a processor. The system includes providing a plurality of communicators for storing state information for a barrier algorithm. Each communicator designates a master core in a multi-processor environment of the computer system. The system allocates or designates one counter for each of a plurality of threads. The system configures a table with a number of entries equal to the maximum number of threads. The system sets a table entry with an ID associated with a communicator when a process thread initiates a collective. The system determines an allocated or designated counter by searching entries in the table.

97 MATHEMATICS AND COMPUTING↗

Enabling communication concurrency through flexible MPI endpoints

MPI defines a one-to-one relationship between MPI processes and ranks. This model captures many use cases effectively; however, it also limits communication concurrency and interoperability between MPI and programming models that utilize threads. This paper describes the MPI endpoints extension, which relaxes the longstanding one-to-one relationship between MPI processes and ranks. Using endpoints, an MPI implementation can map separate communication contexts to threads, allowing them to drive communication independently. Endpoints also enable threads to be addressable in MPI operations, enhancing interoperability between MPI and other programming models. These characteristics are illustrated through several examples and an empirical study that contrasts current multithreaded communication performance with the need for high degrees of communication concurrency to achieve peak communication performance.

Communication↗

Shared address collectives using counter mechanisms

A shared address space on a compute node stores data received from a network and data to transmit to the network. The shared address space includes an application buffer that can be directly operated upon by a plurality of processes, for instance, running on different cores on the compute node. A shared counter is used for one or more of signaling arrival of the data across the plurality of processes running on the compute node, signaling completion of an operation performed by one or more of the plurality of processes, obtaining reservation slots by one or more of the plurality of processes, or combinations thereof.

97 MATHEMATICS AND COMPUTING↗

Mechanism of supporting sub-communicator collectives with O(64) counters as opposed to one counter for each sub-communicator

A system and method for enhancing barrier collective synchronization on a computer system comprises a computer system including a data storage device. The computer system includes a program stored in the data storage device and steps of the program being executed by a processor. The system includes providing a plurality of communicators for storing state information for a bather algorithm. Each communicator designates a master core in a multi-processor environment of the computer system. The system allocates or designates one counter for each of a plurality of threads. The system configures a table with a number of entries equal to the maximum number of threads. The system sets a table entry with an ID associated with a communicator when a process thread initiates a collective. The system determines an allocated or designated counter by searching entries in the table.

97 MATHEMATICS AND COMPUTING↗

Mechanism of supporting sub-communicator collectives with O(64) counters as opposed to one counter for each sub-communicator

A system and method for enhancing barrier collective synchronization on a computer system comprises a computer system including a data storage device. The computer system includes a program stored in the data storage device and steps of the program being executed by a processor. The system includes providing a plurality of communicators for storing state information for a bather algorithm. Each communicator designates a master core in a multi-processor environment of the computer system. The system allocates or designates one counter for each of a plurality of threads. The system configures a table with a number of entries equal to the maximum number of threads. The system sets a table entry with an ID associated with a communicator when a process thread initiates a collective. The system determines an allocated or designated counter by searching entries in the table.

97 MATHEMATICS AND COMPUTING↗

CONSTRAINTS ON LONG-PERIOD PLANETS FROM AN L'- AND M-BAND SURVEY OF NEARBY SUN-LIKE STARS: OBSERVATIONS

We present the observational results of an L'- and M-band adaptive optics imaging survey of 54 nearby, Sun-like stars for extrasolar planets, carried out using the Clio camera on the MMT. We have concentrated more strongly than all other planet-imaging surveys to date on very nearby F, G, and K stars, prioritizing stellar proximity higher than youth. Ours is also the first survey to include extensive observations in the M band, which supplement the primary L' observations. Models predict much better planet/star flux ratios at the L' and M bands than at more commonly used shorter wavelengths (i.e., the H band). We have carried out extensive blind simulations with fake planets inserted into the raw data to verify our sensitivity, and to establish a definitive relationship between source significance in {sigma} and survey completeness. We find 97% confident-detection completeness for 10{sigma} sources, but only 46% for 7{sigma} sources-raising concerns about the standard procedure of assuming high completeness at 5{sigma}, and demonstrating that blind sensitivity tests to establish the significance-completeness relation are an important analysis step for all planet-imaging surveys. We discovered a previously unknown {approx}0.15 M{sub sun} stellar companion to the F9 star GJ 3876, at a projected separation of about 80 AU. Twelve additional candidate faint companions are detected around other stars. Of these, 11 are confirmed to be background stars and one is a previously known brown dwarf. We obtained sensitivity to planetary-mass objects around almost all of our target stars, with sensitivity to objects below 3 M{sub Jup} in the best cases. Constraints on planet populations based on this null result are presented in our Modeling Results paper.

79 ASTRONOMY AND ASTROPHYSICS↗

CONSTRAINTS ON LONG-PERIOD PLANETS FROM AN L'- AND M-BAND SURVEY OF NEARBY SUN-LIKE STARS: MODELING RESULTS

We have carried out an L'- and M-band adaptive optics (AO) extrasolar planet imaging survey of 54 nearby, Sun-like stars using the Clio camera at the MMT. Our survey concentrates more strongly than all others to date on very nearby F, G, and K stars, in that we have prioritized proximity higher than youth. Our survey is also the first to include extensive observations in the M band, which supplemented the primary L' observations. These longer-wavelength bands are most useful for very nearby systems in which low-temperature planets with red IR colors (i.e., H - L', H - M) could be detected. The survey detected no planets, but set interesting limits on planets and brown dwarfs in the star systems we investigated. We have interpreted our null result by means of extensive Monte Carlo simulations and constrained the distributions of extrasolar planets in mass M and semimajor axis a. If planets are distributed according to a power law with dN {proportional_to} M {sup {alpha}} a {sup {beta}} dMda, normalized to be consistent with radial velocity (RV) statistics, we find that a distribution with {alpha} = -1.1 and {beta} = -0.46, truncated at 110 AU, is ruled out at the 90% confidence level. These particular values of {alpha} and {beta} are significant because they represent the most planet-rich case consistent with current statistics from RV observations. With 90% confidence no more than 8.1% of stars like those in our survey have systems with three widely spaced, massive planets like the A star HR 8799. Our observations show that giant planets in long-period orbits around Sun-like stars are rare, confirming the results of shorter-wavelength surveys and increasing the robustness of the conclusion.

79 ASTRONOMY AND ASTROPHYSICS↗

DOD (USAF) turbulence accidents and incidents

A summary of Air Force turbulence related mishaps for the last ten years of Air Force mishaps is presented from a perspective of where it has been, where it is now, and where it is going. In addition to accounts of major mishaps, a summary of what actions were taken to preclude future similar mishaps is presented. Also, a discussion of some of the things being done now and being planned for the future to prevent turbulence related mishaps is presented.

Miller, Douglas↗