Engineering topics

Miller, L.

Publications and source records attributed to Miller, L..

At least 37 records · Page 2

NASA NTRS1988

Life sciences space biology project planning

The Life Sciences Space Biology (LSSB) research will explore the effect of microgravity on humans, including the physiological, clinical, and sociological implications of space flight and the readaptations upon return to earth. Physiological anomalies from past U.S. space flights will be used in planning the LSSB project.The planning effort integrates science and engineering. Other goals of the LSSB project include the provision of macroscopic view of the earth's biosphere, and the development of spinoff technology for application on earth.

Primeaux, G.↗

NASA NTRS1986

An advanced Ni-Cd battery cell design

The evolution of an advanced Ni-Cd space battery cell design continues to prove very promising. High oxygen/hydrogen gas recombination rates (currently up to a C/5 charge rate) and increased electrolyte activation level tolerance (currently up to 5.6 grams Ah of positive capacity) were demonstrated by test. A superior performance, extended life battery cell offering advantages should soon be available for mission applications

Miller, L.↗

NASA NTRS1986

The 4.5 inch diameter IPV Ni-H2 cell development program

Interest in larger capacity Ni-H2 battery cells for space applications has resulted in the initiation of a development/qualification/production program. Cell component design was completed and component hardware fabricated and/or delivered. Finished cell design projections demonstrate favorable specific energies in the range of 70 to 75 Whr/Kg (32 to 34 Whr/Lb) for capacities of 100 to 250 Ah. It is further planned during this effort to evaluate the advanced cell design technology which has evolved from the work conducted at the NASA/Lewis Research Center.

Miller, L.↗

NASA NTRS1985

The gaseous environments of double radio galaxies

A detailed investigation is made of the X-ray emission from five 3CR double radio galaxies, and upper limits are set to the X-ray emissivity of the regions around the radio lobes. These limits, when combined with the expected behavior of hot gas in and around the lobes, show that most of the radio-emitting plasma observed is unlikely to be maintained in static pressure-balance with an external medium. The plasma must expand, and the luminosities of double radio galaxies may therefore decrease with time for most of their lifetimes. A lower limit on the magnetic field strength in the lobes of one-tenth the equipartition value is also derived.

Miller, L.↗

NASA NTRS1985

Improved Specific Energy Ni-h2 Cell

Design optimization activities which have evolved and validated the necessary technology to produce Ni-H2 battery cells exhibiting a specific energy of 75-80 Whr/Kg (energy density approximately 73 Whr/L are summarized. Final design validation is currently underway with the production of battery cells for qualification and life testing. The INTELSAT type Ni-H2 battery cell design has been chosen for expository purposes. However, it should be recognized portions of the improved technology could be applied to the Air Force type Ni-H2 battery cell design with equal benefit.

Miller, L.↗

NASA NTRS1984

An X-ray survey of a complete sample of 3CR radio galaxies

The X-ray survey of the galaxies, 40 in all, was made with the Einstein Observatory. By comparing the distributions of X-ray luminosities, it is found that 3CR galaxies with double radio morphology (FR 2) and optical emission-line spectra tend to be the more powerful X-ray emitters, with broad-line galaxies at the top of the distribution. It is also found that the X-ray luminosity is strongly correlated with the 5 GHz radio nuclear luminosity. Through an analysis of the complete optical and radio sample with the Spearman partial rank correlation technique, it is determined that nuclear radio luminosity at 5 GHz is correlated with both total radio luminosity at 178 MHz and with galaxy optical luminosity. Other weaker correlations are found of the X-ray luminosity with the total radio luminosity at 178 MHz and the optical luminosity of the galaxy. The results are seen as underlining the importance of nuclear phenomena in radio galaxies and indicating a nuclear origin of their X-ray emission. In addition, it is found that the 3CR emission-line galaxies are similar to both Seyfert galaxies and quasars with double radio morphology in their X-ray properties, strongly reinforcing a unified picture of active nuclei.

Fabbiano, G.↗

NASA NTRS1982

Nickel system manufacturing update

The electrochemical positive electrode was used in nickel hydrogen for six or seven years with very good results, primarily because of the dimensional stability and the high electrical utilization of the active material.

Miller, L.↗

NASA NTRS1981

A comparison of three liquid-ventilation cooling garments during treadmill exercise

A comparative study was made of the heat transfer performance and physiological effects of three different cooling garments used under sealed garments (simulating space suits) on five male subjects, during treadmill exercise. The mean exercise metabolic rate while walking at 0.9 m/s (2 mph) was 464 plus or minus 33 W. An equilibrium condition was never reached during the uncooled suited control runs and the subjects lost approximately two percent of body weight during the exercises. The mean weight loss with an Apollo-type garment was 0.35 plus or minus 0.10 kg, and 0.26 plus or minus 0.11 kg with the full-body cooling patch garment (garment 2). With the partial-coverage cooling patch (garment 3), the weight loss was 0.52 plus or minus 0.12 kg. The data showed an increase in the leg blood flow when the working muscles were not cooled by liquid flow (garment 3), and the arm blood flow remained unchanged with and without liquid cooling to the arms.

Webbon, B.↗

NASA NTRS1981

Lightweight 50A h case design

Reduction of weight in the cell container and incorporation of compression seals are described. Design geometry is standard NASA 50A h geometry. The unit was pressurized to 100 psig. The yield point was not achieved. The case weighs 150 g.

Miller, L.↗

NASA NTRS1981

Nickel hydrogen cells, an historic overview

The development of the nickel hydrogen battery system was primarily for replacement of the nickel cadmium battery and for space power systems. A chronological review of the major events and milestones leading up to the current system status is summarized.

Miller, L.↗

NASA NTRS1980

Aerospace electrode line

A facility which produces electrodes for spacecraft power supplies is described. The electrode assembly procedures are discussed. A number of design features in the production process are reported including a batch operation mode and an independent equipment module design approach for transfering the electrode materials from process tank to process tank.

Miller, L.↗

NASA NTRS1980

Air Force nickel-hydrogen flight experiment

A gas leakage test, a capacity test, a charge retention test, and an electrolyte leakage test were among the tests conducted on a nickel hydrogen battery in a flight environment. The battery design features and its performance in each test are discussed.

Miller, L.↗

NASA NTRS1976

A real-time optical data processing device

A novel liquid-crystal electro-optical device useful as a real-time input device in coherent optical data processing is described. The device is a special adaptation of an ac photoactivated liquid-crystal light valve, and utilizes a hybrid field effect (45 deg twisted nematic effect in OFF state and pure optical birefringence of the liquid crystal in ON state). A thin-film sandwich exerts photoelectric control over the optical birefringence of a thin liquid-crystal layer. Liquid-crystal layer thickness is successfully reduced without image degradation. The device offers high resolution (better than 100 lines/mm), contrast (better than 100/1), high speed (10 msec ON, 15 msec OFF), high input sensitivity, low power input, low fabrication cost, and can be operated at below 10 V rms. Preliminary measurements on device performance in level slicing, filtering, contrast reversal, and edge enhancement are under way.

Jacobson, A.↗

NASA NTRS1975

A real-time optical data processing device

The design, operation, and structure of the hybrid field effect light valve, a real-time input device for application to coherent optical data processing (CODP), is described. The device consists of a sandwich of thin films that electrically control the optical birefringence of a thin (2 micrometer) liquid crystal layer. It has high resolution (greater than 100 1/mm), contrast ratio (greater than 100:1), speed (10 sec on, 15 sec off) and input sensitivity (about 0.3 ergs/sq cm) in addition to cost and size advantages. Performance data for a laboratory model are presented.

Jacobson, A.↗

NASA NTRS1975

A new real-time non-coherent to coherent light image converter - The hybrid field effect liquid crystal light valve

A new, high-performance device has been developed for application to real-time coherent optical data processing. The new device embodies a CdS photoconductor, a CdTe light-absorbing layer, a dielectric mirror, and a liquid crystal layer sandwiched between indium-tin-oxide transparent electrodes deposited on optical quality glass flats. The noncoherent image is directed onto the photoconductor; this reduces the impedance of the photoconductor, thereby switching the ac voltage that is impressed across the electrodes onto the liquid crystal to activate the device. The liquid crystal is operated in a hybrid field effect mode. It utilizes the twisted nematic effect to create a dark off-state and the optical birefringence effect to create the bright on-state. The liquid crystal modulates the polarization of the coherent read-out light so an analyzer must be used to create an intensity modulated output beam.

Grinberg, J.↗

NASA NTRS1975

Optical-to-optical interface device

An investigation was conducted to develop an optical-to-optical interface device capable of performing real-time incoherent-to-incoherent optical image conversion. The photoactivated liquid crystal light valve developed earlier represented a prototype liquid crystal light valve device capable of performing these functions. A device was developed which had high performance and extended lifetime.

Jacobson, A. D.↗

NASA NTRS1974

Study of process variables associated with manufacturing hermetically-sealed nickel-cadmium cells

A two year study of the major process variables associated with the manufacturing process for sealed, nickel-cadmium, areospace cells is summarized. Effort was directed toward identifying the major process variables associated with a manufacturing process, experimentally assessing each variable's effect, and imposing the necessary changes (optimization) and controls for the critical process variables to improve results and uniformity. A critical process variable associated with the sintered nickel plaque manufacturing process was identified as the manual forming operation. Critical process variables identified with the positive electrode impregnation/polarization process were impregnation solution temperature, free acid content, vacuum impregnation, and sintered plaque strength. Positive and negative electrodes were identified as a major source of carbonate contamination in sealed cells.

Miller, L.↗

NASA NTRS1972

Study of process variables associated with manufacturing hermetically-sealed nickel-cadmium cells

The effort and results of a program to determine and study the critical process variables associated with the manufacture of aerospace, hermetically-sealed, nickel-cadmium cells are reported. During the period, the impregnation/polarization process variable study was brought to a close with the completion of a series of related experiments. The results of the experiments are summarized. During this period, a general characterization of cell separator materials was initiated. The major conclusions resulting from the characterization of materials are included.

Miller, L.↗