Search NASA⌕ Search

Engineering topics

Min, Jie

Publications and source records attributed to Min, Jie.

11 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Simultaneous Improvements in Efficiency and Stability of Organic Solar Cells via a Symmetric‐Asymmetric Dual‐Acceptor Strategy

Abstract Simultaneously achieving improvements in power conversion efficiency (PCE) and stability is the main task of the current development stage of organic solar cells (OSCs). This work reports a symmetry–asymmetry dual‐acceptor (SADA) strategy to construct ternary devices, which is found to be feasible for increasing both the PCE and the operational lifetime of OSCs. In this contribution, the symmetric acceptor L8‐BO and the asymmetric acceptor BTP‐S9 are blended in equal proportions with polymer donor PM6 for the consideration of absorption spectrum complementarity and cascade energetic alignment. In addition, the features of crystallinity and miscibility of the dual‐acceptor deliver optimized morphology lead to a high PCE of 18.84%. In addition, the asymmetric acceptor BTP‐S9 with a larger dipole moment shows tighter molecular stacking and longer crystal correlation length, which favor intrinsic molecular photostability, and further consolidate the operational lifetime of OSCs when coordinated with L8‐BO. This work demonstrates the efficacy of the SADA strategy for constructing efficient and stable OSCs.

Chemistry↗
DOE OSTI2022

Device Performance of Emerging Photovoltaic Materials (Version 3)

Abstract Following the 2nd release of the “Emerging PV reports,” the best achievements in the performance of emerging photovoltaic devices in diverse emerging photovoltaic research subjects are summarized, as reported in peer‐reviewed articles in academic journals since August 2021. Updated graphs, tables, and analyses are provided with several performance parameters, e.g., power conversion efficiency, open‐circuit voltage, short‐circuit current density, fill factor, light utilization efficiency, and stability test energy yield. These parameters are presented as a function of the photovoltaic bandgap energy and the average visible transmittance for each technology and application, and are put into perspective using, e.g., the detailed balance efficiency limit. The 3rd installment of the “Emerging PV reports” extends the scope toward triple junction solar cells.

14 SOLAR ENERGY↗
DOE OSTI2022

Donor End-Capped Alkyl Chain Length Dependent Non-Radiative Energy Loss in All-Small-Molecule Organic Solar Cells

A critical bottleneck for further efficiency breakthroughs in organic solar cells (OSCs) is to minimize the non-radiative energy loss (eΔV nr ) while maximizing the charge generation. With the development of highly emissive low-bandgap non-fullerene acceptors, the design of high-performance donors becomes critical to enable the blend with the electroluminescence quantum efficiency to approach or surpass the pristine acceptor. Herein, by shortening the end-capped alkyl chains of the small-molecular donors from hexyl (MPhS-C6) to ethyl (MPhS-C2), the material obtained aggregation that was insensitive to thermal annealing (TA) along with condensed packing simultaneously. The former leads to small phase separation and suppressed upshifts of the highest occupied molecular orbital energy level during TA, and the latter facilitates its efficient charge-transport at aggregation-less packing. Hence, the ΔV nr decreases from 0.242 to 0.182 V, from MPhS-C6 to MPhS-C2 based OSCs. An excellent PCE of 17.11% is obtained by 1,8-diiodoctane addition due to almost unchanged high J sc (26.6 mA cm –2 ) and V oc (0.888 V) with improved fill factor, which is the record efficiency with the smallest energy loss (0.497 eV) and ΔV nr (0.192 V) in all-small-molecule OSCs. Finally, these results emphasize the potential material design direction of obtaining concurrent TA-insensitive aggregation and condensed packing to maximize the device performances with a super low ΔV nr .

36 MATERIALS SCIENCE↗
DOE OSTI2022

Compromising Charge Generation and Recombination with Asymmetric Molecule for High-Performance Binary Organic Photovoltaics with Over 18% Certified Efficiency

Balancing the charge generation and recombination constitutes a major challenge to break the current limit of organic photovoltaics (OPVs). Here, to address this issue, an asymmetric non-fullerene acceptor, namely the AC9, is developed and high-performance OPV with a champion efficiency of 18.43% (18.1% certified) is demonstrated. This represents the record value among binary OPVs. Comprehensive analysis on exciton dissociation, charge collection, carrier transport, and recombination has been carried out, unveiling that the improved device performance of asymmetric AC9-based OPVs is originated from a better compromise between charge generation and non-radiative charge recombination, compared with the corresponding symmetric ones. This work provides a high-performing molecule and paves the way for high-performance OPVs through asymmetric molecular design.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Device Performance of Emerging Photovoltaic Materials (Version 2)

Following the 1st release of the "Emerging photovoltaic (PV) reports", the best achievements in the performance of emerging photovoltaic devices in diverse emerging photovoltaic research subjects are summarized, as reported in peer-reviewed articles in academic journals since August 2020. Updated graphs, tables, and analyses are provided with several performance parameters, e.g., power conversion efficiency, open-circuit voltage, short-circuit current density, fill factor, light utilization efficiency, and stability test energy yield. These parameters are presented as a function of the photovoltaic bandgap energy and the average visible transmittance for each technology and application and are put into perspective using, e.g., the detailed balance efficiency limit. The 2nd installment of the "Emerging PV reports" extends the scope toward tandem solar cells and presents the current state-of-the-art in tandem solar cell performance for various material combinations.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Baseplate Temperature–Dependent Vertical Composition Gradient in Pseudo–Bilayer Films for Printing Non–Fullerene Organic Solar Cells

Numerous previous reports on the sequential deposition (SD) technique have demonstrated that this approach can achieve a p–i–n active layer architecture with an ideal vertical composition gradient, which is one of the critical factors that can influence the physical processes that determine the photovoltaic performance of organic solar cells. Herein, a commonly used photovoltaic system comprised of PM6 as a donor and Y6 as an acceptor is investigated with respect to sequential blade–processing deposition to comprehensively explore the morphology characteristics as a function of baseplate temperature. A systematic study of the temperature–dependent blend morphology elucidates the SD–processed configuration merits and device physics behind temperature–controlled degree of vertical composition gradient, and constructs the temperature–microstructure–property relationship for the corresponding photovoltaic parameters. The result shows, as the temperature increases, the morphology of the active layer has undergone a distinct evolution from the pseudo–bulk heterojunction to a pseudo–planar heterojunction and then to a pseudo–planar bilayer, leading to a non–monotonic correlation between baseplate temperature and device performance. Further, this investigation not only reveals the importance of precisely controlling baseplate temperature for gaining vertical morphology control, but also provides a path toward rational optimization of device performance in the lab–to–fab transition.

14 SOLAR ENERGY↗
DOE OSTI2021

A Difluoro‐Monobromo End Group Enables High‐Performance Polymer Acceptor and Efficient All‐Polymer Solar Cells Processable with Green Solvent under Ambient Condition

Abstract In this paper, a difluoro‐monobromo end group is designed and synthesized, which is then used to construct a novel polymer acceptor (named PY2F‐T) yielding high‐performance all‐polymer solar cells with 15.22% efficiency. The fluorination strategy can increase the intramolecular charge transfer and interchain packing of the previous PY‐T based acceptor, and significantly improve photon harvesting and charge mobility of the resulting polymer acceptor. In addition, detailed morphology investigations reveal that the PY2F‐T‐based blend shows smaller domain spacing and higher domain purity, which significantly suppress charge recombination as supported by time‐resolved techniques. These polymer properties enable simultaneously enhanced J SC and FF of the PY2F‐T‐based devices, eventually delivering device efficiencies of over 15%, significantly outperforming that of the devices based on the non‐fluorinated PY‐T polymer (13%). More importantly, the PY2F‐T‐based active layers can be processed under ambient conditions and still achieve a 14.37% efficiency. They can also be processed using non‐halogenated solvent o ‐xylene (no additive) and yield a decent performance of 13.05%. This work demonstrates the success of the fluorination strategy in the design of high‐performance polymer acceptors, which provide guidelines for developing new all‐PSCs with better efficiencies and stabilities for commercial applications.

Yu, Han↗
DOE OSTI2021

Regio‐Regular Polymer Acceptors Enabled by Determined Fluorination on End Groups for All‐Polymer Solar Cells with 15.2 % Efficiency

Abstract Polymerization sites of small molecule acceptors (SMAs) play vital roles in determining device performance of all‐polymer solar cells (all‐PSCs). Different from our recent work about fluoro‐ and bromo‐ co‐modified end group of IC‐FBr (a mixture of IC‐FBr1 and IC‐FBr2), in this paper, we synthesized and purified two regiospecific fluoro‐ and bromo‐ substituted end groups (IC‐FBr‐ o & IC‐FBr‐ m ), which were then employed to construct two regio‐regular polymer acceptors named PYF‐T‐ o and PYF‐T‐ m , respectively . In comparison with its isomeric counterparts named PYF‐T‐ m with different conjugated coupling sites, PYF‐T‐ o exhibits stronger and bathochromic absorption to achieve better photon harvesting. Meanwhile, PYF‐T‐ o adopts more ordered inter‐chain packing and suitable phase separation after blending with the donor polymer PM6, which resulted in suppressed charge recombination and efficient charge transport. Strikingly, we observed a dramatic performance difference between the two isomeric polymer acceptors PYF‐T‐ o and PYF‐T‐ m . While devices based on PM6:PYF‐T‐ o can yield power conversion efficiency (PCE) of 15.2 %, devices based on PM6:PYF‐T‐ m only show poor efficiencies of 1.4 %. This work demonstrates the success of configuration‐unique fluorinated end groups in designing high‐performance regular polymer acceptors, which provides guidelines towards developing all‐PSCs with better efficiencies.

Yu, Han↗
DOE OSTI2021

Regio‐Regular Polymer Acceptors Enabled by Determined Fluorination on End Groups for All‐Polymer Solar Cells with 15.2 % Efficiency

Abstract Polymerization sites of small molecule acceptors (SMAs) play vital roles in determining device performance of all‐polymer solar cells (all‐PSCs). Different from our recent work about fluoro‐ and bromo‐ co‐modified end group of IC‐FBr (a mixture of IC‐FBr1 and IC‐FBr2), in this paper, we synthesized and purified two regiospecific fluoro‐ and bromo‐ substituted end groups (IC‐FBr‐ o & IC‐FBr‐ m ), which were then employed to construct two regio‐regular polymer acceptors named PYF‐T‐ o and PYF‐T‐ m , respectively . In comparison with its isomeric counterparts named PYF‐T‐ m with different conjugated coupling sites, PYF‐T‐ o exhibits stronger and bathochromic absorption to achieve better photon harvesting. Meanwhile, PYF‐T‐ o adopts more ordered inter‐chain packing and suitable phase separation after blending with the donor polymer PM6, which resulted in suppressed charge recombination and efficient charge transport. Strikingly, we observed a dramatic performance difference between the two isomeric polymer acceptors PYF‐T‐ o and PYF‐T‐ m . While devices based on PM6:PYF‐T‐ o can yield power conversion efficiency (PCE) of 15.2 %, devices based on PM6:PYF‐T‐ m only show poor efficiencies of 1.4 %. This work demonstrates the success of configuration‐unique fluorinated end groups in designing high‐performance regular polymer acceptors, which provides guidelines towards developing all‐PSCs with better efficiencies.

Yu, Han↗
DOE OSTI2020

Device Performance of Emerging Photovoltaic Materials (Version 1)

Abstract Emerging photovoltaics (PVs) focus on a variety of applications complementing large scale electricity generation. Organic, dye‐sensitized, and some perovskite solar cells are considered in building integration, greenhouses, wearable, and indoor applications, thereby motivating research on flexible, transparent, semitransparent, and multi‐junction PVs. Nevertheless, it can be very time consuming to find or develop an up‐to‐date overview of the state‐of‐the‐art performance for these systems and applications. Two important resources for recording research cells efficiencies are the National Renewable Energy Laboratory chart and the efficiency tables compiled biannually by Martin Green and colleagues. Both publications provide an effective coverage over the established technologies, bridging research and industry. An alternative approach is proposed here summarizing the best reports in the diverse research subjects for emerging PVs. Best performance parameters are provided as a function of the photovoltaic bandgap energy for each technology and application, and are put into perspective using, e.g., the Shockley–Queisser limit. In all cases, the reported data correspond to published and/or properly described certified results, with enough details provided for prospective data reproduction. Additionally, the stability test energy yield is included as an analysis parameter among state‐of‐the‐art emerging PVs.

36 MATERIALS SCIENCE↗