Engineering topics

Min, Min

Publications and source records attributed to Min, Min.

4 records

DOE OSTI2024

Influence of Atmospheric Slant Path on Geostationary Hyperspectral Infrared Sounder Radiance Simulations

Accurately simulating a geostationary hyperspectral infrared sounder is critical for quantitative applications. Traditional radiation simulations of such instruments often overlook the influence of slant observation geometry by using vertical profile assumption, leading to inadequate simulation accuracy. By using global atmospheric profiles with 1 km spatial resolution, the slant-path effects on brightness temperature simulations are quantified. Experiments indicate that the slant geometry has less impact on longwave brightness temperature simulations and has a substantial impact on middle-wave brightness temperature simulations. It may introduce 0.5 K (or more) uncertainty to brightness temperatures of water vapor absorption channels when the satellite zenith angle is greater than 45°. Considering the slant profile is recommended for quantitative applications of geostationary hyperspectral sounder data, such as sounding retrieval and data assimilation.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

High-Brightness Self-seeded X-ray Free Electron Laser to Precisely Map Macromolecular Structure

Two datasets were uploaded. Run numbers #r0101~#r0112 were collected from self-seeded XFEL mode. Run numbers #r0079~#r0088 and #r0090 were collected from SASE mode. The run number is shown in the file name as "ue_191027_SFX_runnumber-c00.cxi.". To understand the effect of self-seeded XFEL source, we used the datasets from run numbers #r0102 to #r0112. Datasets used were randomly chosen. - SS1 is from #r0102~#r0112. - SS2 is from #r0102~#r0105 and #r0109. - SS3 is from #r0104 and #r0105. To compare self-seeded mode and SASE mode, we also used corresponding three SASE datasets labeled as SASE1, SASE2, and SASE3 from run numbers #r0079 to #r0089. Datasets used were randomly chosen. - SASE1 is from #r0079~#r0089. - SASE2 is from #r0080, #r0081, #r0085, #r0087. - SASE3 is composed of #r0079, #r0080.

Lysozyme↗

DOE OSTI2018

Aerosol-induced changes in the vertical structure of precipitation: a perspective of TRMM precipitation radar

Our knowledge is still poor regarding the response of the precipitation vertical structure to aerosols, partly due to the ignorance of precipitation occurring at different spatial scales. A total of 6 years of collocated ground-based PM 10 and satellite-based (Tropical Rainfall Measuring Mission, TRMM) radar data, along with ERA-Interim reanalysis, are used in this study to investigate the aerosol effects on three localized rain regimes (shallow, stratiform, and convective rain) over the Pearl River Delta region of China. A subjective analysis method is proposed to discriminate between the localized and synoptic-scale precipitations based on weather composite charts where daily averaged wind field at 850 hPa is overlaid with the geopotential height at 500 hPa. In general, average rain rate tends to be greater under polluted conditions than under clean conditions. But such potential aerosol effects are regime dependent: as the atmosphere becomes slightly polluted (PM 10 ≤38 µg m -3 ), the top 1 % radar reflectivity (Z) for all regimes initially increases, followed by continued increases and weak decreases for convective and stratiform/shallow rain regimes, respectively. As the atmosphere becomes much more polluted, such regime dependences of aerosol effects are more significant. From a perspective of the vertical Z structure, comparisons between polluted conditions (days with the highest third of PM 10 concentration) and clean conditions (days with the lowest third of PM 10 concentration) show that the convective rain regime exhibits a deeper and stronger Z pattern, whereas a much shallower and weaker Z pattern is observed for stratiform and shallow precipitation regimes. In particular, the top height of the 30 dBZ rain echo increases by ~29 % (~1.27 km) for the convective regime, but decreases by ~10.8 % (~0.47 km) for the stratiform regime. However, no noticeable changes are observed for the shallow precipitation regime. Impacts of meteorological factors are further studied on both rain top height (RTH) and the center of gravity of Z, including vertical velocity, vertical wind shear, convection available potential energy, and vertically integrated moisture flux divergence (MFD). The possible invigoration effect on convective precipitation seems dependent on wind shear, in good agreement with previous findings. Overall, the observed dependence of the precipitation vertical structure on ground-based PM 10 supports the notion of aerosol invigoration or suppression effect on cold or warm rain and adds new insights into the nature of the complex interactions between aerosol and various localized precipitation regimes.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2008

Provenance in Data Interoperability for Multi-Sensor Intercomparison

As our inventory of Earth science data sets grows, the ability to compare, merge and fuse multiple datasets grows in importance. This requires a deeper data interoperability than we have now. Efforts such as Open Geospatial Consortium and OPeNDAP (Open-source Project for a Network Data Access Protocol) have broken down format barriers to interoperability; the next challenge is the semantic aspects of the data. Consider the issues when satellite data are merged, cross-calibrated, validated, inter-compared and fused. We must match up data sets that are related, yet different in significant ways: the phenomenon being measured, measurement technique, location in space-time or quality of the measurements. If subtle distinctions between similar measurements are not clear to the user, results can be meaningless or lead to an incorrect interpretation of the data. Most of these distinctions trace to how the data came to be: sensors, processing and quality assessment. For example, monthly averages of satellite-based aerosol measurements often show significant discrepancies, which might be due to differences in spatio- temporal aggregation, sampling issues, sensor biases, algorithm differences or calibration issues. Provenance information must be captured in a semantic framework that allows data inter-use tools to incorporate it and aid in the intervention of comparison or merged products. Semantic web technology allows us to encode our knowledge of measurement characteristics, phenomena measured, space-time representation, and data quality attributes in a well-structured, machine-readable ontology and rulesets. An analysis tool can use this knowledge to show users the provenance-related distrintions between two variables, advising on options for further data processing and analysis. An additional problem for workflows distributed across heterogeneous systems is retrieval and transport of provenance. Provenance may be either embedded within the data payload, or transmitted from server to client in an out-of-band mechanism. The out of band mechanism is more flexible in the richness of provenance information that can be accomodated, but it relies on a persistent framework and can be difficult for legacy clients to use. We are prototyping the embedded model, incorporating provenance within metadata objects in the data payload. Thus, it always remains with the data. The downside is a limit to the size of provenance metadata that we can include, an issue that will eventually need resolution to encompass the richness of provenance information required for daata intercomparison and merging.

Lynnes, Chris↗