Engineering topics

Minich, M. D.

Publications and source records attributed to Minich, M. D..

5 records

NASA NTRS1977

Doubly-curved variable-thickness isoparametric heterogeneous finite element

This paper describes an element streamlined for the analysis of doubly-curved, variable-thickness structural components and illustrates its effective application to vibration and static problems. The element is isoparametric, doubly-curved, thin-shell and triangular with variable thickness and accounts for anisotropic, inhomogeneous elastic material behavior. The element has six nodes (three corner and three mid-side) with five degrees-of-freedom (DOF) per node - three translations and two rotations. Quadratic isoparametric interpolation polynomials are used to express the element geometry and displacement variables in terms of corresponding nodal variables.

Minich, M. D.↗

NASA NTRS1975

Analytical displacements and vibrations of cantilevered unsymmetric fiber composite laminates

A fiber composite flat cantilever plate that has symmetric and nonsymmetric laminate configurations is theoretically investigated to determine its static and dynamic structural response. The finite element analysis method used includes a unique triangular finite element developed at Lewis for the analysis of fiber composite airfoils. The various responses investigated include tip displacements, natural frequencies, and fundamental mode shapes. The results show that laminate configurations may be selected for a cantilever such that when the tip at the leading edge is loaded normal to the plane of the plate, the tip at the trailing edge can (1) deflect in the opposite direction, (2) deflect about the same, or (3) deflect more than the tip at the leading edge. This variation in response can be utilized to provide built-in structural damping to resist flutter.

Minich, M. D.↗

NASA NTRS1975

Structural response of fiber composite fan blades

A fiber composite airfoil, typical for high-tip speed compressor applications, is subjected to load conditions anticipated to be encountered in such applications, and its structural response is theoretically investigated. The analysis method used consists of composite mechanics embedded in pre- and post-processors and coupled with NASTRAN. The load conditions examined include thermal due to aerodynamic heating, pressure due to aerodynamic forces, centrifugal, and combinations of these. The various responses investigated include root reactions due to various load conditions, average composite and ply stresses, ply delaminations, and the fundamental modes and the corresponding reactions. The results show that the thermal and pressure stresses are negligible compared to those caused by the centrifugal forces. Also, the core-shell concept for composite blades is an inefficient design (core plies not highly stressed) and appears to be sensitive to interply delaminations. The results are presented in graphical and tabular forms to illustrate the types and amount of data required for such an analysis, and to provide quantitative data of the various responses which can be helpful in designing such composite blades.

Chamis, C. C.↗

NASA NTRS1975

Structural response of a fiber composite compressor fan blade airfoil

A theoretical investigation was performed to determine the structural response of a fiber composite airfoil typical of those encountered in high-tip speed compressor fan blades when subjected to load conditions anticipated in such applications. The analysis method consisted of composite mechanics embedded in pre- and post-processors coupled with NASTRAN. The load conditions examined include thermal due to aerodynamic heating, pressure due to aerodynamic forces, and centrifugal. Root reactions due to various load conditions, average composite and ply stresses, ply delaminations, and the fundamental modes and the corresponding reactions were investigated. The results show that the thermal and pressure stresses are negligible compared to those caused by the centrifugal forces. The core-shell concept for composite blades is an inefficient design and is sensitive to interply delaminations. The results are presented in graphical and tabular forms to illustrate the types and amount of data required for the analysis, and to provide quantitative data associated with the various responses which can be helpful in designing composite blades.

Chamis, C. C.↗

NASA NTRS1975

Analytical displacements and vibrations of cantilevered unsymmetric fiber composite laminates

A fiber composite flat cantilever plate that has symmetric and nonsymmetric laminate configurations is theoretically investigated to determine its static and dynamic structural response. The finite element analysis method used includes a unique triangular finite element developed at Lewis for the analysis of fiber composite airfoils. The various responses investigated include tip displacements, natural frequencies, and fundamental mode shapes. The results show that the displacements and the natural frequencies can be in considerable error for nonsymmetric laminate configurations if the membrane-bending coupling is not taken into account. Structural response results obtained from ten laminate configurations are presented in tabular forms and may be used as an aid in selecting laminate configurations for composite airfoils.

Minich, M. D.↗