Search NASA⌕ Search

Engineering topics

Mirels, Harold

Publications and source records attributed to Mirels, Harold.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1961

Laminar Boundary Layer Behind a Strong Shock Moving into Air

The laminar wall boundary layer behind a strong shock advancing into stationary air has been determined. Numerical results have been obtained for shock Mach numbers up to 14 using real gas values for density and viscosity and assuming Prandtl and Lewis numbers of 0.72 and 1, respectively. The numerical results for shear and heat transfer agree, within 4 percent, with a previously presented approximate analytical expression for these quantities. A slight modification of this expression results in agreement with the numerical data to within 2.5 percent. Analytical expressions for boundary-layer thickness and displacement thickness, correct to within 4 percent for the present data, have also been obtained.

Mirels, Harold↗
NASA NTRS1959

Source Distribution Method for Unsteady One-Dimensional Flows With Small Mass, Momentum, and Heat Addition and Small Area Variation

A source distribution method is presented for obtaining flow perturbations due to small unsteady area variations, mass, momentum, and heat additions in a basic uniform (or piecewise uniform) one-dimensional flow. First, the perturbations due to an elemental area variation, mass, momentum, and heat addition are found. The general solution is then represented by a spatial and temporal distribution of these elemental (source) solutions. Emphasis is placed on discussing the physical nature of the flow phenomena. The method is illustrated by several examples. These include the determination of perturbations in basic flows consisting of (1) a shock propagating through a nonuniform tube, (2) a constant-velocity piston driving a shock, (3) ideal shock-tube flows, and (4) deflagrations initiated at a closed end. The method is particularly applicable for finding the perturbations due to relatively thin wall boundary layers.

Mirels, Harold↗
NASA NTRS1959

Effect of Body Perturbations on Hypersonic Flow Over Slender Power Law Bodies

Hypersonic-slender-body theory, in the limit as the free-stream Mach number becomes infinite, is used to find the effect of slightly perturbing the surface of slender two-dimensional and axisymmetric power law bodies, The body perturbations are assumed to have a power law variation (with streamwise distance downstream of the nose of the body). Numerical results are presented for (1) the effect of boundary-layer development on two dimensional and axisymmetric bodies, (2) the effect of very small angles of attack (on tow[dimensional bodies), and (3) the effect of blunting the nose of very slender wedges and cones.

Mirels, Harold↗
NASA NTRS1959

Approximate Analytical Solutions for Hypersonic Flow Over Slender Power Law Bodies

Approximate analytical solutions are presented for two-dimensional and axisymmetric hypersonic flow over slender power law bodies. Both zero order (M approaches infinity) and first order (small but nonvanishing values of 1/(M(Delta)(sup 2) solutions are presented, where M is free-stream Mach number and Delta is a characteristic slope. These solutions are compared with exact numerical integration of the equations of motion and appear to be accurate particularly when the shock is relatively close to the body.

Mirels, Harold↗
NASA NTRS1957

Attenuation in a shock tube due to unsteady-boundary-layer action

A method is presented for obtaining the attenuation of a shock wave in a shock tube due to the unsteady boundary layer along the shock-tube walls. It is assumed that the boundary layer is thin relative to the tube diameter and induces one-dimensional longitudinal pressure waves whose strength is proportional to the vertical velocity at the edge of the boundary layer. The contributions of the various regions in a shock tube to shock attenuation are indicated. The method is shown to be in reasonably good agreement with existing experimental data.

Mirels, Harold↗
NASA NTRS1951

A lift-cancellation technique in linearized supersonic-wing theory

A lift-cancellation technique is presented for determining load distributions on thin wings at supersonic speeds. The loading on a wing having a prescribed plan form is expressed as the loading of a known related wing (such as a two-dimensional or triangular wing) minus the loading of an appropriate cancellation wing. The lift-cancellation technique can be used to find the loading on a large variety of wings. Applications to swept wings having curvilinear plan forms and to wings having reentrant side edges are indicated.

Mirels, Harold↗
NASA NTRS1950

Line-vortex theory for calculation of supersonic downwash

The perturbation field induced by a line vortex in a supersonic stream and the downwash behind a supersonic lifting surface are examined to establish approximate methods for determining the downwash behind supersonic wings. Lifting-lines methods are presented for calculating supersonic downwash. A bent lifting-line method is proposed for computing the downwash field behind swept wings. When applied to triangular wings with subsonic leading edges, this method gives results that, in general, are in good agreement with the exact linearized solution. An unbent lifting-line method (horseshoe-vortex system) is proposed for unswept wings. This method is applied to determine downwash behind rectangular wings with aspect ratios of 2 and 4. Excellent agreement with exact linearized theory is obtained for both aspect ratios by placing the lifting line at the 1/2-chord point. The use of lifting-lines therefore appears promising for obtaining estimates of the downwash behind supersonic wings.

Mirels, Harold↗