Engineering topics
Publications and source records attributed to Mirletz, Brian.
Solesca is working to enhance the energy and financial modeling components of their real-time solar project design platform. In collaboration with NREL, they aim to improve the accuracy and reliability of their software by integrating best practices and knowledge from NREL.
Geothermal cost and performance evaluation implemented via technoeconomic assessment (TEA) modeling is critical for the Department of Energy (DOE) and other geothermal industry stakeholders in assessing the current state of geothermal technologies and to identify existing hurdles to commercially viable geothermal development. The Geothermal Electricity Technology Evaluation Model (GETEM) is a major TEA tool used in estimating the economic feasibility and levelized cost of energy (LCOE) of conventional hydrothermal systems and enhanced geothermal systems (EGS). Since 2021, GETEM has been transitioning from an intricate spreadsheet model to a user-friendly tool within the System Advisor Model (SAM) developed by the National Renewable Energy Laboratory (NREL). Apart from enabling an expanded visibility of the geothermal model among other renewable resources, having GETEM in SAM has the advantage of simulation automation, better usability, updates tracking, active user inputs/feedback, and extended financial modeling. GETEM is used in developing supply curves for the Annual Technology Baseline (ATB). The ATB data are inputs to the Renewable Energy Potential (reV) and the Regional Energy Deployment System (ReEDS) models. The geothermal module in NREL’s reV model assesses the geothermal energy potential in the conterminous United States by defining the geospatial intersection of geothermal resources with existing grid infrastructure within the constraint of land use characteristics. The ReEDS model is a capacity expansion model used for simulating the long-term build-out and operation of the US generation and transmission system based on current energy costs and policies. To ensure enhanced representation of current industry trends in our model transitions and development, we organized a two-day virtual workshop to elicit geothermal industry stakeholder input and recommendations on our current approaches and assumptions on technoeconomic, resource assessment, and deployment scenarios modeling of geothermal technologies. Participants included developers, operators, investors, regulatory agencies, system modelers, national laboratory researchers, consultants, and other stakeholders. In this workshop, we gained stakeholder insights on current geothermal plant performance (i.e., capacity factors), updated drilling costs and learning curves, and next generation technologies such as closed loop and superhot rock geothermal. Other outcomes from this workshop and its impact on future geothermal development feasibility, resource availability, and capacity expansion studies are compiled and discussed.
Overview of the SIPs on PV Repowering Project funded by SETO titled "Quantifying the Impact of PV System Repowering and Module Reuse on PV Project Economics, Sustainability, & Equity".
This is the lessons learned powerpoint from the InSPIRE teams participation in the Department of Energy's Clean Energy to Communities Program.
Explore the source record for details and available documents.
This presentation was developed for a webinar series for the USAID's South Asia Group for Energy (SAGE) and South Asia Regional Energy Partnership (SAREP). The presentation includes insights into agrivoltaic site assessment planning, including what is needed for a farm assessment, solar panel system design from the agricultural perspective, variables that go into crop selection, and environmental impact, sustainability, and agritourism, technical parameters for developing an agrivoltaics project, including what makes up a PV feasibility study, understanding variables that go into technology and equipment selection, agrivoltaic installation and agricultural integration, and monitoring and maintenance throughout the life of the project, and agrivoltaic financial planning, risk mitigation, and debt equity issues.
Consistent cost and performance data for various electricity generation technologies can be difficult to find and may change frequently for certain technologies. With the Annual Technology Baseline (ATB), the National Renewable Energy Laboratory annually provides an organized and centralized set of such cost and performance data. The ATB uses the best information from the Department of Energy national laboratories' energy analysts. The ATB has been reviewed by experts and it includes the following electricity generation and storage technologies: land-based wind, offshore wind, distributed wind, utility-scale solar photovoltaics (PV), commercial-scale solar PV, residential-scale solar PV, concentrating solar power, geothermal power, hydropower, utility-scale battery storage, commercial battery storage, residential battery storage, pumped storage hydropower, nuclear, coal, and natural gas. EIA data for conventional biopower are included for reference. This webinar presentation introduces the 2024 update to the ATB Electricity data and documentation.
These data provide the 2024 update of the Electricity Annual Technology Baseline (ATB). Starting in 2015 NREL has presented the ATB, consisting of detailed cost and performance data, both current and projected, for electricity generation and storage technologies. The ATB products now include data (Excel workbook, Tableau workbooks, and structured summary csv files), as well as documentation and user engagement via a website, presentation, and webinar. Starting in 2021, the data are cloud optimized and provided in the OEDI data lake. The data for 2015 - 2020 are can be found on the NREL Data Search Page. The website documentation can be found on the ATB Website.
As part of the Tools and Apps for Agrivoltaics session, NREL presents their tools that have capabilities for modeling PV and agricultural dual use sites. These include the System Advisor Model (SAM), bifacial_radiance open-source raytracing tool, and a simplified agriPV calculator available in the InSPIRE website.
This talk will focus on recent and planned modeling improvements to the NREL System Advisor ModelTM (SAM), with recently released features including PV hourly clipping correction, expanded geographic scope of SAM's NSRDB interface to Europe and Africa, and additional options for hybrids. Upcoming improvements include a case comparison feature, improved visualizations, and extensions of PVWatts for battery modeling and utility rate calculations.
Ak mwens pase 2% nan popilasyon riral la ki gen akse a elektrisite ak preske mwatye popilasyon an ap fe fas ak grangou egi, Ayiti fe fas a defi entekonekte nan povrete eneji ak ensekirite alimante. Yon solisyon pou ede abode povrete eneji ann Ayiti se devlopman mini-griy sole distribiye, sitou sole. Sepandan, souvan te ki pi byen adapte pou deplwaye jenerasyon sole se tou pi byen adapte pou agrikilti pa ti femye yo, kidonk kreye yon tansyon potansyelman konplike ant akse eneji ak sekirite manje. Pou adrese tansyon sa a, devlope sole yo, espesyalis agrikol yo ak cheche yo ap egzamine ansanm yon nouvo solisyon ki rele "agrivoltayik". Agrivoltaics se yon solisyon pataje te-itilize ki rapidman elaji nan mache sole etabli tankou Etazini, Ewop, ak Azi ki pe sole ak agrikilti, pwodwi elektrisite ak bay espas pou rekot ak bet patiraj anba ak ant panno. Nan kad Patenarya Akse Eneji pou Ayiti a ak Ajans Ameriken pou Devlopman Entenasyonal (USAID), Laboratwa Nasyonal Eneji Renouvlab (NREL) te fe yon premye analiz posibilite ak pwoje angajman pati konsene yo pou evalye potansyel agrivoltayik nan konteks mini-gri an Ayiti. Analiz la te konsidere mini-grid tipik 100-kW ak pi gwo 1-MW nan vil atrave Ayiti epi li te devlope de egzanp arketip agrivoltaik ki baze sou kontribisyon lokal kle yo, ki gen ladan irradians sole, done pwodiksyon ki soti nan resansman agrikol la, pri sou mache a, entevyou ak moun ki gen entere yo, ak ki egziste deja, rechech agrivoltayik. See NREL/TP-7A40-88444 for the English translation of this document.
With less than 2% of the rural population with access to electricity and almost half the population facing acute hunger, Haiti faces interconnected challenges of energy poverty and food insecurity. One solution to help address energy poverty in Haiti has been the development of distributed solar, particularly solar mini-grids. However, often the land best suited for deploying solar generation is also best suited for agriculture by smallholder farmers, thereby creating a potentially complicated tension between energy access and food security. To address this tension, solar developers, agricultural specialists, and researchers are jointly examining a novel solution called "agrivoltaics." Agrivoltaics is a shared land-use solution that is rapidly expanding in established solar markets like the United States, Europe, and Asia that pairs solar with agriculture, producing electricity and providing space for crops and animal grazing under and between panels. As part of the Energy Access Partnership for Haiti with the U.S. Agency for International Development (USAID), the National Renewable Energy Laboratory (NREL) performed an initial feasibility analysis and stakeholder engagement project to evaluate the potential for agrivoltaics in mini-grid contexts in Haiti. The analysis considered typical 100-kW and larger 1-MW mini-grids in towns across Haiti and developed two example agrivoltaic archetypes based on key local inputs, including solar irradiance, production data from the agricultural census, market prices, stakeholder interviews, and existing agrivoltaic research. See NREL/TP-7A40-89399 for the Haitian Creole translation of this document.
This talk will focus on recent and planned modeling improvements to the NREL System Advisor ModelTM (SAM), including PV hourly clipping correction, expanded geographic scope of PVWatts including Ukraine, additional options for hybrids, and enhanced PySAM and GUI interoperability. Additional topics will also include: bifacial modeling features including irradiance on the ground for agrivoltaics, PV uncertainty simulation features, and integrations with other NREL and industry tools.
The Annual Technology Baseline (ATB) team will introduce the new open-source Python tools for processing and interacting with electricity ATB data and provide helpful user demonstrations, including how to: extract data from the ATB workbook and calculate levelized cost of electricity (LCOE) in Python; programmatically interact with and modify ATB data; and use the tools to modify the tax credit assumptions of the ATB to account for bonus credits from the Inflation Reduction Act of 2022.
This software is a suite of Python files and Jupyter notebooks supporting the calculation of cost and financial parameters for the Annual Technology Baseline (ATB) electricity data, including capital expenditures, levelized cost of energy, and debt fractions using the ATB input data.
This webinar describes linkages between NREL's dGen, SAM, and REopt tools that were developed as a part of the RiDER project, including specifying utility rates in the SAM GUI and using them in dGen adoption analysis, and using REopt to determine optimal system sizes for dGen agents.
Consistent cost and performance data for various electricity generation technologies can be difficult to find and may change frequently for certain technologies. With the Annual Technology Baseline (ATB), the National Renewable Energy Laboratory annually provides an organized and centralized set of such cost and performance data. The ATB uses the best information from the Department of Energy national laboratories' renewable energy analysts. The ATB has been reviewed by experts and it includes the following electricity generation and storage technologies: land-based wind, offshore wind, distributed wind, utility-scale solar photovoltaics (PV), commercial-scale solar PV, residential-scale solar PV, concentrating solar power, geothermal power, hydropower, utility-scale battery storage, commercial battery storage, residential battery storage, pumped storage hydropower, coal, and natural gas. EIA data for nuclear and conventional biopower are included for reference. This webinar presentation introduces the 2023 update to the ATB Electricity data and documentation.
These data provide the 2023 update of the Electricity Annual Technology Baseline (ATB). Starting in 2015 NREL has presented the ATB, consisting of detailed cost and performance data, both current and projected, for electricity generation and storage technologies. The ATB products now include data (Excel workbook, Tableau workbooks, and structured summary csv files), as well as documentation and user engagement via a website, presentation, and webinar. Starting in 2021, the data are cloud optimized and provided in the OEDI data lake. The data for 2015 - 2020 are can be found on the NREL Data Search Page. The website documentation can be found on the ATB Website.