Search NASA⌕ Search

Engineering topics

Mirnov, V V

Publications and source records attributed to Mirnov, V V.

First-order finite-Larmor-radius fluid modeling of tearing and relaxation in a plasma pinch

Drift and Hall effects on magnetic tearing, island evolution, and relaxation in pinch configurations are investigated using a non-reduced first-order finite-Larmor-radius (FLR) fluid model with the nonideal magnetohydrodynamics (MHD) with rotation, open discussion (NIMROD) code [C.R. Sovinec and J. R. King, J. Comput. Phys. 229, 5803 (2010)]. An unexpected result with a uniform pressure profile is a drift effect that reduces the growth rate when the ion sound gyroradius ({rho}{sub s}) is smaller than the tearing-layer width. This drift is present only with warm-ion FLR modeling, and analytics show that it arises from {nabla}B and poloidal curvature represented in the Braginskii gyroviscous stress. Nonlinear single-helicity computations with experimentally relevant {rho}{sub s} values show that the warm-ion gyroviscous effects reduce saturated-island widths. Computations with multiple nonlinearly interacting tearing fluctuations find that m = 1 core-resonant-fluctuation amplitudes are reduced by a factor of two relative to single-fluid modeling by the warm-ion effects. These reduced core-resonant-fluctuation amplitudes compare favorably to edge coil measurements in the Madison Symmetric Torus (MST) reversed-field pinch [R. N. Dexter et al., Fusion Technol. 19, 131 (1991)]. The computations demonstrate that fluctuations induce both MHD- and Hall-dynamo emfs during relaxation events. The presence of a Hall-dynamo emf implies a fluctuation-induced Maxwell stress, and the simulation results show net transport of parallel momentum. The computed magnitude of force densities from the Maxwell and competing Reynolds stresses, and changes in the parallel flow profile, are qualitatively and semi-quantitatively similar to measurements during relaxation in MST.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Classical confinement and outward convection of impurity ions in the MST RFP

Impurity ion dynamics measured with simultaneously high spatial and temporal resolution reveal classical ion transport in the reversed-field pinch. The boron, carbon, oxygen, and aluminum impurity ion density profiles are obtained in the Madison Symmetric Torus [R. N. Dexter et al., Fusion Technol. 19, 131 (1991)] using a fast, active charge-exchange-recombination-spectroscopy diagnostic. Measurements are made during improved-confinement plasmas obtained using inductive control of tearing instability to mitigate stochastic transport. At the onset of the transition to improved confinement, the impurity ion density profile becomes hollow, with a slow decay in the core region concurrent with an increase in the outer region, implying an outward convection of impurities. Impurity transport from Coulomb collisions in the reversed-field pinch is classical for all collisionality regimes, and analysis shows that the observed hollow profile and outward convection can be explained by the classical temperature screening mechanism. The profile agrees well with classical expectations. Experiments performed with impurity pellet injection provide further evidence for classical impurity ion confinement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Minimum energy states of the cylindrical plasma pinch in single-fluid and Hall magnetohydrodynamics

Relaxed states of a plasma column are found analytically in single-fluid and Hall magnetohydrodynamics (MHD). We perform complete minimization of the energy with constraints imposed by invariants inherent in the corresponding models. It is shown that the relaxed state in Hall MHD is a force-free magnetic field with uniform axial flow and/or rigid azimuthal rotation. In contrast, the relaxed states in single-fluid MHD are more complex due to the coupling between velocity and magnetic field. Cylindrically and helically symmetric relaxed states are considered for both models. Helical states may be time dependent and analogous to helical waves, propagating on a cylindrically symmetric background. Application of our results to reversed-field pinches (RFP) is discussed. The radial profile of the parallel momentum predicted by the single-fluid MHD relaxation theory is shown to be in reasonable agreement with experimental observation from the Madison symmetric torus RFP experiment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

First-order finite-Larmor-radius effects on magnetic tearing in pinch configurations

The linear and nonlinear evolution of a single-helicity tearing mode in a cylindrical, force-free pinch are investigated using a fluid model with first-order finite-Larmor-radius corrections. Linear results computed with the nimrod[nonideal magnetohydrodynamics (MHD) with rotation, open discussion] code [Sovinec et al., J. Comput. Phys. 195, 355 (2004)] produce a regime at small {rho}{sub s} where the growth rate is reduced relative to resistive MHD, though the Hall term is not significant. The leading order contributions from ion gyroviscosity may be expressed as a drift associated with {nabla}B{sub 0} and poloidal curvature for experimentally relevant {beta}=0.1, S{approx}10{sup 5}-10{sup 6} force-free equilibria. The heuristic analytical dispersion relation, {gamma}{sup 4}({gamma}-i{omega}{sub *gv})={gamma}{sub MHD}{sup 5} where {omega}{sub *gv} is the gyroviscous drift frequency, confirms numerical results. The behavior of our cylindrical computations at large {rho}{sub s} corroborates previous analytic slab studies where an enhanced growth rate and radially localized Hall dynamo are predicted. Similar to previous drift-tearing results, nonlinear computations with cold ions demonstrate that the Hall dynamo is small when the island width is large in comparison with the scale for electron-ion coupling. The saturation is then determined by the resistive MHD physics. However, with warm ions the gyroviscous stress supplements the nonlinear Lorentz force, and the saturated island width is reduced.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of impulsive reconnection driven by nonlinear Hall dynamics

The magnetic fields associated with reconnection in the edge of the reversed field pinch configuration have been measured in the Madison Symmetric Torus. The measured magnetic field structure is compared with theoretical predictions computed in both toroidal and cylindrical geometries. The summation of multiple modes has been accomplished to reveal a complex but still coherent edge structure. Key terms of relevant Ohm's law are accessible from magnetic field measurement and reveal the ordering [(1/ne)JxB>>E>{eta}J], which implies that two fluid effects are important in the physics governing this reconnection. Further, it is seen that the nonlinear three-wave coupling of the Hall term acts as a driving mechanism for this linearly stable mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mass-Dependent Ion Heating during Magnetic Reconnection in a Laboratory Plasma

Noncollisional ion heating in laboratory and astrophysical plasmas and the mechanism of conversion of magnetic energy to ion thermal energy are not well understood. In the Madison Symmetric Torus reversed-field pinch experiment, ions are heated rapidly during impulsive reconnection, attaining temperatures exceeding hundreds of eV, often well in excess of the electron temperature. The energy budget of the ion heating and its mass scaling in hydrogen, deuterium, and helium plasmas were determined by measuring the fraction of the released magnetic energy converted to ion thermal energy. The fraction ranges from about 10%-30% and increases approximately as the square root of the ion mass. A simple model based on stochastic ion heating is proposed that is consistent with the experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of the momentum and current transport from tearing instability in the Madison Symmetric Torus reversed-field pinch

In this paper measurements of momentum and current transport caused by current driven tearing instability are reported. The measurements are done in the Madison Symmetric Torus reversed-field pinch [R. N. Dexter, D. W. Kerst, T. W. Lovell, S. C. Prager, and J. C. Sprott, Fusion Technol. 19, 131 (1991)] in a regime with repetitive bursts of tearing instability causing magnetic field reconnection. It is established that the plasma parallel momentum profile flattens during these reconnection events: The flow decreases in the core and increases at the edge. The momentum relaxation phenomenon is similar in nature to the well established relaxation of the parallel electrical current and could be a general feature of self-organized systems. The measured fluctuation-induced Maxwell and Reynolds stresses, which govern the dynamics of plasma flow, are large and almost balance each other such that their difference is approximately equal to the rate of change of plasma momentum. The Hall dynamo, which is directly related to the Maxwell stress, drives the parallel current profile relaxation at resonant surfaces at the reconnection events. These results qualitatively agree with analytical calculations and numerical simulations. It is plausible that current-driven instabilities can be responsible for momentum transport in other laboratory and astrophysical plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

m=1 ideal kink modes in a line-tied screw pinch with finite plasma pressure

A new method for computing ideal magnetohydrodynamic linear eigenmodes in a cylindrical screw pinch with line-tying boundary conditions at the axial ends is presented. In this method, plasma volume is reflected over one of the end planes, and equations and field components are continued into the extended volume with the continuation rules prescribed by the line-tying boundary conditions. Field components in the combined volume are expanded in Fourier series in the axial coordinate. The resulting set of coupled differential equations is solved numerically in the radial coordinate by a finite difference method yielding growth rates and eigenmodes for the system. An example of an m=1 (m is the poloidal wave number) internal kink instability in a force-free plasma equilibrium with uniform pressure is considered. In contrast to a periodic screw pinch, marginally stable perturbations are essentially compressible in the line-tied geometry. Finite compressibility makes the mode more stable in addition to the usual line-tying stabilization in zero pressure plasma. The critical length corresponding to the marginal stability increases with the increase of plasma beta. A universal axial dependence for marginally stable density perturbations {rho}(r,z)={rho}(r)exp[-iz{mu}(r)] is predicted analytically and confirmed numerically, where {mu}(r) depends on the equilibrium magnetic field components as {mu}(r)=B{sub {theta}}/rB{sub z}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling of ion heating from viscous damping of reconnection flows in the reversed field pinch

Strong self-heating of ions is observed in the reversed field pinch (RFP). During a sawtooth crash in the Madison Symmetric Torus RFP, the ion temperature can spontaneously double in {approx}100 {mu}s. It is also observed that high Z impurities are heated more strongly than bulk ions. The possibility of ion heating due to tearing instabilities at sawtooth crash is examined. Heating scenarios due to viscous damping of strongly localized perpendicular and parallel flows driven in the vicinity of resonant surface in tearing mode are considered. Flow amplitudes and spatial scales are estimated from linear and nonlinear resistive magnetohydrodynamic modeling. The heating rates are found from kinetic models with different levels of approximation, up to solving kinetic equation with a Landau collision operator. Results show reasonable agreement of the modeled impurity heating rate with the experiment, while the estimated bulk ions heating is somewhat weaker than in the experiment. Further theoretical and experimental study are required for a more definite conclusion as to whether it is the main ion heating mechanism or if there is some other important ion heating scenario.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stochastic magnetic field driven charge transport and zonal flow during magnetic reconnection

Magnetic fluctuation-induced charge transport, resulting from particle transport that is not intrinsically ambipolar, has been measured in the high-temperature interior of a reversed-field pinch plasma. It is found that global resistive tearing modes and their nonlinear interactions lead to significant charge transport, equivalent to the perpendicular Maxwell stress, in the vicinity of the resonant surface for the dominant core resonant mode during magnetic reconnection. Finite charge transport can result in a zonal flow associated with locally strong radial electric field and electric field shear. In the presence of stochastic magnetic field, radial electric field is expected to be balanced by radial electron pressure gradient. Direct measurement of local density gradient is consistent with the formation of radial electric field and the zonal flow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Momentum transport from tearing modes with shear flow

A theoretical and computational study of momentum transport from reconnection from tearing modes in the presence of sheared flow in a reversed field pinch has been performed. Momentum transport from single tearing modes in the linear and nonlinear regimes and transport from multiple tearing modes is studied. It is found that, whereas a single mode produces transport, a strong enhancement in transport arises from the nonlinear coupling of multiple modes. A single tearing mode, in the presence of equilibrium flow, produces momentum transport in the vicinity of the reconnection layer. This is demonstrated from quasilinear calculation of Maxwell and Reynolds stresses. However, nonlinear, resistive magnetohydrodynamics computation of the full, multimode nonlinear dynamics reveals an additional effect. In the presence of multiple tearing modes, nonlinear coupling strongly enhances the torques and broadens their radial width. The resulting transport from current-driven instability is much more rapid than classical viscous forces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Advanced Interferometry Techniques for Burning Plasmas

For future burning plasma experiments, all diagnostics must be re-evaluated in terms of their measurement capabilities and robustness to the new environment. This is certainly true for interferometry measurements where conventional approaches may not be ideal and interpretation may require modification due to high plasma temperatures. Optimizing these systems to provide maximum information will be crucial to understanding burning plasma dynamics. This paper will explore a variety of phase measurement techniques for the main body and divertor regions that can be utilized on burning plasma experiments like ITER and beyond.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗