Search NASA⌕ Search

Engineering topics

Misra, Sidharth

Publications and source records attributed to Misra, Sidharth.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

Development of SMAP Retrievals for Forested Regions: SMAPVEX19-22 and SMAPVEX22-Boreal

The retrieval of soil moisture (SM) under forest canopy has long been an important goal for low frequency remote sensing. The NASA Soil Moisture Active Passive (SMAP) mission is engaged at three separate experiment sites to improve its SM retrieval algorithm in forested areas. Two of the sites are located in the deciduous forest region in Massachusetts and New York, US and one is located in southern boreal forest zone in Saskatchewan, Canada. Each site has a SM measurement network of about 20 stations spread out over an area of about 30 km, which covers the SMAP radiometer footprint. In 2022, intensive observations will be carried out at each site which involve deployments of an airborne instrument, which is similar to the SMAP instrument, and intensive manual measurements of SM, surface and vegetation. The measurements also include tower-based radiometer observations with ground truth measurements within the instrument footprint. Here we show some early results using the networks and SMAP measurements to analyze the sensitivity of the SMAP L-band measurements to SM changes in forested area and the impact of the vegetation to the signal. The results suggest an upper limit for vegetation attenuation accounting for surface roughness effect and relate that to the values used in the current SMAP SM products.

Yueh, Simon H.↗
NASA NTRS2021

SMAP Validation Experiment 2019-2021 (SMAPVEX19-21): Detection of Soil Moisture Under Temperate Forest Canopy

The retrieval of soil moisture under forest canopy has long been an important goal for low frequency remote sensing. The NASA mission started a dedicated field experiment in May 2019 by deploying two temporary soil moisture networks in northeast US that cover two separate SMAP pixels with variable degree of forest cover. The measurements will be augmented with two intensive observation periods (IOP). The first IOP is planned for July and the other one for October. The IOPs will see deployment of the airborne PALS (Passive Active L-band sensor) instrument, which is similar to the SMAP instrument, and intensive manual measurements of soil moisture and vegetation. The measurements also include tower-based radiometer observations with ground truth measurements within the instrument footprint. The early results have shown that the SMAP measurement signal at L-band is sensitive to soil moisture changes observed on the ground.

Yueh, Simon H.↗
NASA NTRS2019

Sensitvity analysis of SMAP-Reflectometry (SMAP-R) signals to vegetation water content

Global Navigation Satellite System – Reflectometry (GNSSR) techniques have proven successful to retrieve several geophysical parameters such as, ocean wind speed, soil moisture, altimetry, wetland dynamics, snow depth estimations. In this paper, the L2C GPS signals measured from the Soil Moisture Active Passive (SMAP) radar after its malfunction is used to investigate the effect of the vegetation water content on the electromagnetic signal. The SMAP Reflectometry (SMAP-R) measurements are obtained at V and H polarizations allowing for not only signal-to-noise ratio (SNR) analysis but also for polarimetric ratio (PR) studies.

Morris, Mary↗
NASA NTRS2019

Multiyear sea ice thickness estimation using wideband P/L-band radiometric measurements

A new wideband radiometer covering P/L-band was developed at the Jet Propulsion Laboratory for polar ocean salinity and seasonal sea-ice thickness measurements. The instrument was deployed on the US Coast Guard Cutter Healy for an Arctic Ocean research cruise from September 13, 2018 to October 20, 2018. This work shows the first results relating sea ice thickness obtained from the measurements taken with the wideband P/L-band radiometer during the campaign. Results from the Artic cruise campaign were also used to study wideband spectral properties of salinity. In addition to this paper, Salinity and wide-band calibration challenges are presented in two other companion papers.

Brown, Shannon↗
NASA NTRS2019

Satellite Salinity Observing System: Recent Discoveries and the Way Forward

Advances in L-band microwave satellite radiometry in the past decade, pioneered by ESA's SMOS and NASA's Aquarius and SMAP missions, have demonstrated an unprecedented capability to observe global sea surface salinity (SSS) from space. Measurements from these missions are the only means to probe the very-near surface salinity (top cm), providing a unique monitoring capability for the interfacial exchanges of water between the atmosphere and the upper-ocean, and delivering a wealth of information on various salinity processes in the ocean, linkages with the climate and water cycle, including land-sea connections, and providing constraints for ocean prediction models. The satellite SSS data are complimentary to the existing in situ systems such as Argo that provide accurate depiction of large-scale salinity variability in the open ocean but under-sample mesoscale variability, coastal oceans and marginal seas, and energetic regions such as boundary currents and fronts. In particular, salinity remote sensing has proven valuable to systematically monitor the open oceans as well as coastal regions up to approximately 40 km from the coasts. This is critical to addressing societally relevant topics, such as land-sea linkages, coastal-open ocean exchanges, research in the carbon cycle, near-surface mixing, and air-sea exchange of gas and mass. In this paper, we provide a community perspective on the major achievements of satellite SSS for the aforementioned topics, the unique capability of satellite salinity observing system and its complementarity with other platforms, uncertainty characteristics of satellite SSS, and measurement versus sampling errors in relation to in situ salinity measurements. We also discuss the need for technological innovations to improve the accuracy, resolution, and coverage of satellite SSS, and the way forward to both continue and enhance salinity remote sensing as part of the integrated Earth Observing System in order to address societal needs.

Vinogradova, Nadya↗
NASA NTRS2018

Soil Moisture Active/Passive (SMAP) L-Band Microwave Radiometer Post-Launch Calibration Upgrade

Current performance and existing problems in SMAP radiometer L1B_TB version 3 data product are described. The post-launch calibration algorithm has been updated by calibrating the three calibration parameters (the equivalent noise temperature of the noise diode, the offset of the reference load, and the antenna gain) jointly by using the global ocean and CS with both 110o and 180o pitch maneuvers after the reflector emissivity is calibrated. The results show that both calibration drift during eclipse season and bias over CS are removed. The RMSDs of the calibration drift over both the global ocean and CS are less than 0.1 K, and the goals of the calibration algorithm upgrade are achieved for coming L1B_TB version 4 data release.

Validation↗
NASA NTRS2017

Recalibration and Validation of the SMAP L-Band Radiometer

SMAP mission was launched on 31st January 2015 in a 6 AM 6 PM sun-synchronous orbit at 685 km altitude to measure soil moisture and freethaw globally. The passive instrument of SMAP is a fully polarimetric L-band radiometer (1.4GHz) operating with a bandwidth of 24MHz. The radiometer L1B data product version 3 has been released for public science activities. Post-launch calibration and validation activities are described in [4,5]. Validation results show that SMAP antenna temperature (TA) is 2.6 K warmer over galactic Cold Sky (CS), and land TB is 2.6 K colder comparing to SMOS land TB (compared at the top of the atmosphere) after the update of the reflectors thermal model. Due to the biases, the SMAP radiometer is under re-calibration for next data release in 2018.We present the updated calibration approaches for the SMAP radiometer product. We will discuss the various radiometer calibration parameters and part of the validation process and result.

SMAP↗
NASA NTRS2017

Soil Moisture Retrieval with Airborne PALS Instrument over Agricultural Areas in SMAPVEX16

NASA's SMAP (Soil Moisture Active Passive) calibration and validation program revealed that the soil moisture products are experiencing difficulties in meeting the mission requirements in certain agricultural areas. Therefore, the mission organized airborne field experiments at two core validation sites to investigate these anomalies. The SMAP Validation Experiment 2016 included airborne observations with the PALS (Passive Active L-band Sensor) instrument and intensive ground sampling. The goal of the PALS measurements are to investigate the soil moisture retrieval algorithm formulation and parameterization under the varying (spatially and temporally) conditions of the agricultural domains and to obtain high resolution soil moisture maps within the SMAP pixels. In this paper the soil moisture retrieval using the PALS brightness temperature observations in SMAPVEX16 is presented.

SMAPVEX15↗
NASA NTRS2017

Validation and Scaling of Soil Moisture in a Semi-Arid Environment: SMAP Validation Experiment 2015 (SMAPVEX15)

The NASA SMAP (Soil Moisture Active Passive) mission conducted the SMAP Validation Experiment 2015 (SMAPVEX15) in order to support the calibration and validation activities of SMAP soil moisture data products. The main goals of the experiment were to address issues regarding the spatial disaggregation methodologies for improvement of soil moisture products and validation of the in situ measurement upscaling techniques. To support these objectives high-resolution soil moisture maps were acquired with the airborne PALS (Passive Active L-band Sensor) instrument over an area in southeast Arizona that includes the Walnut Gulch Experimental Watershed (WGEW), and intensive ground sampling was carried out to augment the permanent in situ instrumentation. The objective of the paper was to establish the correspondence and relationship between the highly heterogeneous spatial distribution of soil moisture on the ground and the coarse resolution radiometer-based soil moisture retrievals of SMAP. The high-resolution mapping conducted with PALS provided the required connection between the in situ measurements and SMAP retrievals. The in situ measurements were used to validate the PALS soil moisture acquired at 1-km resolution. Based on the information from a dense network of rain gauges in the study area, the in situ soil moisture measurements did not capture all the precipitation events accurately. That is, the PALS and SMAP soil moisture estimates responded to precipitation events detected by rain gauges, which were in some cases not detected by the in situ soil moisture sensors. It was also concluded that the spatial distribution of the soil moisture resulted from the relatively small spatial extents of the typical convective storms in this region was not completely captured with the in situ stations. After removing those cases (approximately10 of the observations) the following metrics were obtained: RMSD (root mean square difference) of0.016m3m3 and correlation of 0.83. The PALS soil moisture was also compared to SMAP and in situ soil moisture at the 36-km scale, which is the SMAP grid size for the standard product. PALS and SMAP soil moistures were found to be very similar owing to the close match of the brightness temperature measurements and the use of a common soil moisture retrieval algorithm. Spatial heterogeneity, which was identified using the high-resolution PALS soil moisture and the intensive ground sampling, also contributed to differences between the soil moisture estimates. In general, discrepancies found between the L-band soil moisture estimates and the 5-cm depth in situ measurements require methodologies to mitigate the impact on their interpretations in soil moisture validation and algorithm development. Specifically, the metrics computed for the SMAP radiometer-based soil moisture product over WGEW will include errors resulting from rainfall, particularly during the monsoon season when the spatial distribution of soil moisture is especially heterogeneous.

SMAPVEX15↗
NASA NTRS2016

Soil Moisture Active Passive (SMAP) L-Band Microwave Radiometer Post-Launch Calibration

The SMAP microwave radiometer is a fully-polarimetric L-band radiometer flown on the SMAP satellite in a 6 AM/ 6 PM sun-synchronous orbit at 685 km altitude. Since April, 2015, the radiometer is under calibration and validation to assess the quality of the radiometer L1B data product. Calibration methods including the SMAP L1B TA2TB (from Antenna Temperature (TA) to the Earth's surface Brightness Temperature (TB)) algorithm and TA forward models are outlined, and validation approaches to calibration stability/quality are described in this paper including future work. Results show that the current radiometer L1B data satisfies its requirements.

simulation↗