Engineering topics

Mitchell, A. C.

Publications and source records attributed to Mitchell, A. C..

12 records

DOE OSTI2023

A global perspective on bacterial diversity in the terrestrial deep subsurface

While recent efforts to catalogue Earth’s microbial diversity have focused upon surface and marine habitats, 12–20% of Earth’s biomass is suggested to exist in the terrestrial deep subsurface, compared to ~1.8% in the deep subseafloor. Metagenomic studies of the terrestrial deep subsurface have yielded a trove of divergent and functionally important microbiomes from a range of localities. However, a wider perspective of microbial diversity and its relationship to environmental conditions within the terrestrial deep subsurface is still required. Our meta-analysis reveals that terrestrial deep subsurface microbiota are dominated by Betaproteobacteria, Gammaproteobacteria and Firmicutes, probably as a function of the diverse metabolic strategies of these taxa. Evidence was also found for a common small consortium of prevalent Betaproteobacteria and Gammaproteobacteria operational taxonomic units across the localities. This implies a core terrestrial deep subsurface community, irrespective of aquifer lithology, depth and other variables, that may play an important role in colonizing and sustaining microbial habitats in the deep terrestrial subsurface. An in silico contamination-aware approach to analysing this dataset underscores the importance of downstream methods for assuring that robust conclusions can be reached from deep subsurface-derived sequencing data. Understanding the global panorama of microbial diversity and ecological dynamics in the deep terrestrial subsurface provides a first step towards understanding the role of microbes in global subsurface element and nutrient cycling.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS1992

Electronic energy gap of molecular hydrogen from electrical conductivity measurements at high shock pressures

Electrical conductivities were measured for liquid D2 and H2 shock compressed to pressures of 10-20 GPa (100-200 kbar), molar volumes near 8 cu cm/mol, and calculated temperatures of 2900-4600 K. The semiconducting energy gap derived from the conductivities is 12 eV, in good agreement with recent quasi-particle calculations and with oscillator frequencies measured in diamond-anvil cells.

Nellis, W. J.↗

NASA NTRS1992

Planetary fluids at high shock pressures and temperatures

The electrical conductivity of liquid H2 was measured at shock pressures in the range 10-20 GPa and shock temperatures in the range 3000-4500 K. Electrical conductivities of H2 are needed for kinematic or dynamo calculation of the magnetic fields of Jupiter and Saturn. Conductivity measurements also enable observations of the narrowing of the electronic energy bandgap of dense H2 with density as its approaches metallization.

Nellis, W. J.↗

NASA NTRS1991

Interior structure of Neptune - Comparison with Uranus

Measurements of rotation rates and gravitational harmonics of Neptune made with the Voyager 2 spacecraft allow tighter constraints on models of the planet's interior. Shock measurements of material that may match the composition of Neptune, the so-called planetary 'ice', have been carried out to pressures exceeding 200 gigapascals (2 megabars). Comparison of shock data with inferred pressure-density profiles for both Uranus and Neptune shows substantial similarity through most of the mass of both planets. Analysis of the effect of Neptune's strong differential rotation on its gravitational harmonics indicates that differential rotation involves only the outermost few percent of Neptune's mass.

Hubbard, W. B.↗

NASA NTRS1991

Properties of planetary fluids at high pressures and temperatures

Observational data obtained by the Voyager space probes to the giant planets Jupiter, Saturn, Uranus, and Neptune have provided valuable information, which is used to refine the picture of the nature of the interiors of these planets. Major results from the Voyager missions include observations of substantial magnetic fields and improved models of internal density distributions. The goal is to obtain equations of state and electrical conductivity data for planetary gases (H2 and He) and the ices (H2O, CH4, and NH3, and their mixtures), which are considered to be the major constituents of the giant planets. These data are needed to test theoretical data bases used to construct models of the chemical composition of planetary interiors, models which are consistent with observables such as mass, diameter, gravitational moments, rotation rate, and magnetic field. The 100 GPa (1 Mbar) pressures and several 1000 K temperatures in the giant planets can be achieved in the lab by the shock compression of liquid specimens. Results are briefly examined.

Nellis, W. J.↗

NASA NTRS1990

Shock temperature measurements of planetary ices - NH3, CH4, and 'synthetic Uranus'

Shock temperature measurements have been performed on several materials which have relevance to the modeling of the outer planets. These materials are methane, ammonia and a mixture of water, ammonia, and isopropanol known as synthetic Uranus. Temperatures have been measured in these materials over the pressure range 33-76 GPa for which there also exists measurements of equation of state and electrical conductivity. The temperatures are found to agree well with available calculations, with small discrepancies between data and theory ascribed to energy absorbing processes such as dissociation and molecular ionization.

Radousky, H. B.↗

NASA NTRS1986

Molecular dissociation and shock-induced cooling in fluid nitrogen at high densities and temperatures

Radiative temperatures and electrical conductivities were measured for fluid nitrogen compressed dynamically to pressures of 18-90 GPa, temperatures of 4000-14,000 K, and densities of 2-3 g/cu cm. The data show a continuous phase transition above 30 GPa shock pressure and confirm that (delta-P/delta-T)v is less than 0, as indicated previously by Hugoniot equation-of-state experiments. The first observation of shock-induced cooling is also reported. The data are interpreted in terms of molecular dissociation, and the concentration of dissociated molecules is calculated as a function of density and temperature.

Radousky, H. B.↗

NASA NTRS1986

Shock temperatures in anorthite glass

Shock-temperature data and the high-pressure thermal behavior of anorthite glass are examined. Temperatures of anorthite glass shocked to pressures between 48-117 GPa were measured in the temperature range 2500-5600 K using optical pyrometry techniques. The time dependence observed in the emitted light of the glass is analyzed in terms of temperature dependence, emissivity dependences, and the time dependence of absorption or scattering of an intervening layer. The three phase transitions at pressures of about 55, 85, and 100 GPa and with transition energies of about 0.5 MJ/kg are studied.

Boslough, M. B.↗

NASA NTRS1985

Shock Compression of Liquid Helium to 56 GPa (560) Kbar

Shock-wave data are presented for liquid helium which has been compressed to densities up to five times greater than the normal liquid. The helium was heated to temperatures up to 21,000 K, while the maximum pressure attained was 56 GPa. The properties of helium and hydrogen are important for modeling the giant planets Saturn and Jupiter where these elements are the major constituents. Conditions on Saturn are of particular interest because studies have suggested that this planet has an internal energy source which is associated with unmixing and gravitational separation the hydrogen-helium fluid at pressures below 1 TPa. The existence of this phase transition depends very sensitively on the hydrogen and helium equation of state. In the experiments, strong shock waves were generated by the impact of planar projectiles into cryogenic specimen holders.

Nellis, W. J.↗

NASA NTRS1984

Shock compression of liquid helium to 56 GPa (560 kbar)

Shock-wave data are presented for liquid helium which has been compressed to densities up to five times greater than the normal liquid. The helium was heated to temperatures up to 21,000 K, while the maximum pressure attained was 56 GPa. The properties of helium and hydrogen are important for modeling the giant planets Saturn and Jupiter where these elements are the major constituents. Conditions on Saturn are of particular interest because studies have suggested that this planet has an internal energy source which is associated with unmixing and gravitational separation of the hydrogen-helium fluid at pressures below 1 TPa. The existence of this phase transition depends very sensitively on the hydrogen and helium equation of state. In the experiments, strong shock waves were generated by the impact of planar projectiles into cryogenic specimen holders.

Nellis, W. J.↗

NASA NTRS1983

Shock temperatures of SiO2 and their geophysical implications

High pressure shock state temperatures of SiO2 were measured in specimens of single crystal alpha-quartz and fused quartz. Projectile impact and pyrometry techniques were employed to impart pressures in the 60-140 GPa range. Shock-induced phase transformations were observed near 70 and 50 GPa along the alpha- and fused-quartz Hugoniots. It is suggested that the transformation consists of melting of the shock-synthesized stishovite, with melting delayed by the superheating of the crystalline phase. Details of the stishovite-liquid phase boundaries have been determined, including stishovite melting at 4500 K under 70 GPa, with the melting accompanied by a relative volume change of about 2.7% and a latent heat of fusion of about 2.4 MJ/kg. At 100 GPa, an approximate limit of 3500 K for the melting of SiO2 is indicated for solid mantle mineral assemblages, such as the earth's mantle

Lyzenga, G. A.↗

NASA NTRS1983

Shock temperatures in anorthite glass

Temperatures of CaAl2Si2O8 (anorthite glass) shocked to pressures between 48 and 117 GPa were measured in the range from 2500 to 5600 K, using optical pyrometry techniques. The pressure dependence of the shock temperatures deviates significantly from predictions based on a single high pressure phase. At least three phase transitions, at pressures of about 55, 85, and 100 GPa and with transition energies of about 0.5 MJ/kg each (approximately 1.5 MJ/kg total) are required to explain the shock temperature data. The phase transition at 100 GPa can possibly be identified with the stishovite melting transition. Theoretical models of the time dependence of the thermal radiation from the shocked anorthite based on the geometry of the experiment and the absorptive properties of the shocked material yields good agreement with observations, indicating that it is not necessary to invoke intrinsic time dependences to explain the data in many cases.

Boslough, M. B.↗